Skip to main content
(828) 649-7190
Same Day Shipping Before 2pm EST

John Deere LA Series Belt: LA105, LA115, LA135, LA145

Need to replace the belt on your John Deere LA Series mower? This guide covers belt types, sizes, and replacement tips for LA105, LA115, LA135, and LA145 models. Keep your lawn looking great with help from Madison Tractor!

Introduction to John Deere LA Series Belts

The John Deere LA Series riding mowers are known for their reliability and ease of use, making them a popular choice for homeowners. But like any outdoor power equipment, they require regular maintenance, and belt replacement is a crucial part of that maintenance. This guide focuses on the belts used in the LA105, LA115, LA135, and LA145 models, providing information on belt types, sizes, and replacement procedures. We'll cover both mower deck belts and drive belts.

Recommended Parts for This Guide

6 parts we recommend — in stock, ships fast, one-click add to cart.

🔍 Looking for a specific part? Try our AI Part Finder — tell it your equipment and what you need, and it will find matching parts instantly.

At Madison Tractor, we understand the importance of using the right parts for your equipment. We carry a wide range of belts for John Deere and other brands like Craftsman, Cub Cadet, Husqvarna, and Toro, ensuring you can find the perfect fit for your mower. We also stock other essential parts like blades, spindles, pulleys, filters, and spark plugs.

Understanding Belt Types: Deck Belts vs. Drive Belts

Your John Deere LA Series mower uses two main types of belts: the mower deck belt and the drive belt. It's crucial to understand the difference between them to ensure you order the correct replacement.

John Deere LA Series Belt Sizes and Part Numbers

Finding the correct belt size and part number is essential for a proper replacement. Refer to your John Deere owner's manual for the most accurate information. Here's a general guide to the belt sizes for the LA Series models mentioned:

Model Mower Deck Size (in) Deck Belt Part Number Approximate Deck Belt Length (in) Drive Belt Part Number
LA105 42 GX20072 or GY20570 85 GX20072 or GY20570 (often same as deck belt)
LA115 42 GX20072 or GY20570 85 GX20072 or GY20570 (often same as deck belt)
LA125 48 A94K 95 M125218
LA145 48 A94K 95 M125218

Important Notes:

  • Belt lengths can vary slightly depending on the manufacturer. Always double-check your owner's manual for precise specifications.
  • John Deere sometimes uses different part numbers for the same belt. The alternatives listed above are generally compatible.
  • When searching on Madison Tractor's website, enter the full part number (e.g., GX20072) for the best results.

Replacing Your John Deere LA Series Belt: Step-by-Step Guide

Replacing a belt on your John Deere LA Series mower is a relatively straightforward task that most homeowners can handle with basic tools. Here's a general guide; always consult your owner's manual for model-specific instructions.

Tools You'll Need:

  • Wrench set
  • Socket set
  • Screwdriver set
  • Pliers
  • Gloves
  • Safety glasses
  • Jack (optional, but recommended for easier access)
  • Belt installation tool (optional, but helpful)

Safety First!

Before starting any repair work, always:

  • Disconnect the spark plug wire to prevent accidental starting.
  • Engage the parking brake.
  • Wear safety glasses and gloves.

Replacing the Mower Deck Belt:

  1. Remove the mower deck: Consult your owner's manual for the specific procedure for your model. This usually involves disconnecting the deck lift links and belt from the engine pulley.
  2. Inspect the pulleys and spindles: Before installing the new belt, check the pulleys and spindles for any damage, wear, or looseness. Replace any faulty components. Using worn pulleys will shorten the life of your new mower deck belt. We carry a full line of pulleys and spindles for most mowers including John Deere, Toro, and Craftsman.
  3. Route the new belt: Follow the belt routing diagram found in your owner's manual or on a sticker on the mower deck. Ensure the belt is properly seated in all the pulley grooves.
  4. Reinstall the mower deck: Reconnect the deck lift links and belt to the engine pulley.
  5. Tension the belt: Adjust the deck tensioner pulley to the proper tension, ensuring components like the tension spring are functioning correctly. The belt should be tight enough to prevent slippage but not so tight that it causes excessive wear.
  6. Test the mower: Start the engine and engage the mower blades. Check for any unusual noises or vibrations.

Replacing the Drive Belt:

  1. Access the drive belt: This usually involves removing a cover or panel underneath the mower.
  2. Release the tension: Locate the tensioner pulley and release the tension on the old belt.
  3. Remove the old belt: Carefully remove the old belt from around the engine pulley, transmission pulley, and any idler pulleys.
  4. Inspect the pulleys: Check the pulleys for any damage or wear and replace them if necessary.
  5. Route the new belt: Follow the belt routing diagram to install the new belt correctly.
  6. Tension the belt: Adjust the tensioner pulley to the proper tension.
  7. Reinstall the cover/panel: Secure the cover or panel back in place.
  8. Test the mower: Start the engine and test the mower's forward and reverse movement.

Troubleshooting Common Belt Problems

  • Belt Slippage: This can be caused by a worn belt, incorrect belt tension, or worn pulleys.
  • Belt Breakage: This can be caused by a damaged belt, excessive tension, or foreign objects getting caught in the belt.
  • Noisy Operation: This can be caused by a worn belt, misaligned pulleys, or dry bearings in the spindles or idler pulleys. Consider replacing bearings and shear pins while servicing your mower.

Regular maintenance, including belt inspection and replacement, is crucial for keeping your John Deere LA Series mower running smoothly. Don't forget about other routine maintenance like changing your oil, replacing your air filter, and changing your fuel filter.

Beyond Belts: Other Essential Parts for Your LA Series Mower

While belts are a common replacement item, remember to maintain other parts of your John Deere LA series mower. This includes regularly inspecting and replacing:

  • Mower Blades: Sharp blades are essential for a clean cut.
  • Air Filters: A clean air filter ensures optimal engine performance.
  • Spark Plugs: Replace spark plugs annually for reliable starting.
  • Oil Filters and Oil: Regular oil changes keep your engine lubricated and running smoothly.

Madison Tractor carries a complete selection of replacement parts for your John Deere, Ariens, Murray, Hustler, Scag, Exmark, Ferris, Snapper, Simplicity, and Dixie Chopper mower.

Find Your John Deere LA Series Belts at Madison Tractor!

Keeping your John Deere LA Series mower in top condition requires using high-quality replacement parts. At Madison Tractor, we offer a wide selection of belts, blades, and other parts for your LA105, LA115, LA135, and LA145 models. Browse our online catalog today to find the perfect John Deere parts for your needs. Our knowledgeable staff is also available to answer any questions and help you find the right parts for your specific mower. Shop with confidence at Madison Tractor for all your outdoor power equipment needs!

🔍 Can't Find Your Part?

Use our AI-Powered Part Finder to search by your equipment's make, model, and what you need. It's the fastest way to find the exact part for your machine.

Try the Part Finder →