John Deere 8120 Tractor Parts
8120 parts and accessories
The John Deere 8120 tractor, manufactured from 2003 to 2006, is a workhorse known for its power and reliability on the farm. Equipped with a robust John Deere PowerTech 8.1L diesel engine producing around 200 horsepower, the 8120 offers a PTO horsepower of approximately 175. Its blend of power, versatility, and operator comfort made it a popular choice for row crop farming and heavy tillage operations.
The John Deere 8120 was introduced as part of the 8020 series, replacing the earlier 8010 models and offering improvements in performance and technology. Production spanned from 2003 to 2006. At its heart lies a John Deere PowerTech 8.1L 6-cylinder diesel engine, producing approximately 200 horsepower (149 kW) at the flywheel. The engine features a displacement of 496 cubic inches (8.1 liters) and is turbocharged for enhanced power and efficiency. Transmission options include a 16-speed PowerShift transmission providing smooth gear changes under load. The independent PTO delivers around 175 horsepower (130 kW) and offers both 540 and 1000 RPM speeds for versatility. The hydraulic system provides a flow rate of approximately 30 GPM (113.6 L/min), and is often configured with 3-4 remote valves. It features a Category III 3-point hitch with a lift capacity of around 9,921 lbs (4500 kg). The 8120 found common application in row crop operations like planting and cultivating corn and soybeans, as well as in hay production and heavy tillage tasks. Its heavier frame and powerful engine differentiate it from smaller models in the John Deere lineup, making it well-suited for demanding tasks.
Specifications
| Engine | John Deere PowerTech 8.1L 200 HP Diesel |
|---|---|
| PTO HP | 175 HP @ 540/1000 RPM |
| Transmission | PowerShift 16-Speed |
| Hydraulics | 30 GPM, 3-4 remotes |
| 3-Point Hitch | Category III, 9,921 lbs |
| Fuel Capacity | 125 gallons |
| Weight | 19,321 lbs |
| Years Produced | 2003-2006 |
Maintenance Tips
- Engine Oil & Filter: Change your engine oil and filter every 250-300 hours of operation, using the recommended John Deere oil specification. Regularly check the oil level to prevent engine damage.
- Hydraulic System: Inspect hydraulic hoses and fittings for leaks regularly. Change hydraulic fluid and filters according to the manufacturer's recommendations (typically every 1000-1200 hours) to maintain optimal performance.
- Fuel System: Use clean, high-quality diesel fuel. Replace fuel filters at recommended intervals to prevent fuel system contamination and ensure proper engine operation. Consider using a fuel additive during winter months to prevent gelling.
- Seasonal Storage: Before storing the tractor for an extended period, stabilize the fuel, change the engine oil and filters, grease all fittings, and disconnect the battery. Store the tractor in a dry, sheltered location.
History & Background
The John Deere 8120 was part of the 8020 series launched in 2003, representing an evolution in tractor design and performance. This model built upon the success of previous John Deere tractors, incorporating technological advancements and improved operator comfort. The 8120 played a significant role in modern agriculture, offering farmers a powerful and reliable solution for a wide range of tasks.
Frequently Asked Questions
What engine is in the John Deere 8120?
The John Deere 8120 is equipped with a John Deere PowerTech 8.1L 6-cylinder turbocharged diesel engine producing approximately 200 horsepower.
What is the PTO horsepower on a 8120?
The John Deere 8120 has a PTO horsepower rating of approximately 175 HP and offers both 540 and 1000 RPM PTO speeds.
What oil filter fits the 8120?
The John Deere 8120 typically uses a John Deere oil filter part number RE504836. Cross-references include Baldwin BD7153 and Fleetguard LF9009.
What are common parts needed for the 8120?
Common wear parts for the John Deere 8120 include engine oil filters, fuel filters, hydraulic filters, air filters, fan belts, hydraulic cylinder seal kits, steering components (tie rod ends), clutch discs (if applicable) and PTO shaft components.

AT226281 - 12 Volt Horn
SKU: AT226281
15 in stock

AR75695 - 7 Pin (North America) Implement Lights Socket
SKU: AR75695
153 in stock

57M8340 - 7 Pin (North America) Implement Lights Plug
SKU: 57M8340
126 in stock

RE566117 - Category III Drawbar Strap
SKU: RE566117
29 in stock

RE563953 - Cat. IV Strap; Drawbar
SKU: RE563953
14 in stock

RE206750 - Center Link End
SKU: RE206750
17 in stock

RE171278 - Cat. III Link End
SKU: RE171278
103 in stock

RE159503 - Drawbar Clevis Assembly
SKU: RE159503
11 in stock

RE150871 - Fastener Pin
SKU: RE150871
486 in stock

R88667 - Drawbar Hammerstrap Nut
SKU: R88667
37 in stock

R88665 - Drawbar Hammerstrap
SKU: R88665
126 in stock

R52006 - Retainer; .906" I.D. X 1.610 O.D. X .188" Thick Washer
SKU: R52006
398 in stock

R207666 - LH Sway Block
SKU: R207666
79 in stock

R207665 - RH Sway Block
SKU: R207665
105 in stock

R205716 - Draft Link Bumper (Pack of 2) Shim
SKU: R205716
Out of stock

R200878 - Center Link Handle
SKU: R200878
43 in stock

R171367 - Drawbar
SKU: R171367
40 in stock

R169163 - Lift Link (Cat III & Cat IV) Pin
SKU: R169163
19 in stock

R156615 - Drawbar Retainer
SKU: R156615
73 in stock

R154440 - Link Body
SKU: R154440
56 in stock

R132544 - Drawbar Strap
SKU: R132544
108 in stock

R130982 - Front Drawbar Support Pin
SKU: R130982
24 in stock

R130953 - Front Drawbar Support Bushing
SKU: R130953
3 in stock

R130638 - Drawbar
SKU: R130638
4 in stock
