John Deere 7330 Tractor Parts
7330 parts and accessories
The John Deere 7330 tractor, manufactured from 2007 to 2011, was a popular choice among farmers for its reliability and versatility. Powered by a robust John Deere PowerTech 6.8L diesel engine producing around 165 engine HP and a PTO horsepower of approximately 135, it offered a good balance of power and fuel efficiency. Its adaptability to various implements made it a workhorse on many farms.
The John Deere 7330 was part of the 7030 series tractors introduced in 2007, replacing earlier models and offering advancements in technology and comfort. It was produced until 2011. Under the hood is a John Deere PowerTech 6.8L 6-cylinder diesel engine, delivering approximately 165 engine horsepower. The engine's displacement is 414 cubic inches. Transmission options included the AutoQuad II, PowerQuad Plus, and IVT (Infinitely Variable Transmission), offering a range of gear and shifting options to suit various applications. The PTO horsepower is around 135 hp, with both 540 and 1000 RPM options available. Hydraulic capacity is approximately 30.5 GPM, with options for multiple remote valves. The 3-point hitch is Category II/III, with a lift capacity of around 9,700 lbs. The 7330 was commonly used for row crop work, hay baling, livestock operations, and tillage. It distinguished itself from other models in the lineup by offering a greater horsepower range than the smaller 7130 and 7230, while remaining more compact and maneuverable than the larger 7430 and 7530 models.
Specifications
| Engine | John Deere PowerTech 6.8L 165 HP Diesel |
|---|---|
| PTO HP | 135 HP @ 540/1000 RPM |
| Transmission | AutoQuad II/PowerQuad Plus/IVT, multiple speeds |
| Hydraulics | 30.5 GPM, Up to 4 remotes |
| 3-Point Hitch | Category II/III, 9,700 lbs lift capacity |
| Fuel Capacity | 68 gallons |
| Weight | 15,300 lbs |
| Years Produced | 2007-2011 |
Maintenance Tips
- Engine Oil & Filter: Change engine oil and filter every 250-300 hours of operation using the recommended John Deere oil specification.
- Hydraulic System: Regularly check hydraulic fluid levels and inspect for leaks. Replace hydraulic filters according to the manufacturer's recommendations, typically every 500 hours or annually.
- Fuel System: Use clean, high-quality diesel fuel and regularly inspect fuel filters. Drain the water separator to prevent contamination of the fuel system.
- Seasonal Storage: Before storing the tractor for extended periods, stabilize the fuel, lubricate all grease fittings, and protect the tires from direct sunlight to prevent cracking.
History & Background
The John Deere 7330 was introduced in 2007 as part of the redesigned 7030 series, offering improved operator comfort and advanced technology compared to previous models. There were no major redesigns during its production run. It played a significant role in agricultural history as a versatile and reliable tractor that helped farmers increase productivity and efficiency.
Frequently Asked Questions
What engine is in the John Deere 7330?
The John Deere 7330 is equipped with a John Deere PowerTech 6.8L 6-cylinder diesel engine, producing approximately 165 engine horsepower.
What is the PTO horsepower on a 7330?
The PTO horsepower on a John Deere 7330 is approximately 135 HP, with options for both 540 and 1000 RPM PTO speeds.
What oil filter fits the 7330?
The John Deere 7330 typically uses a John Deere oil filter part number RE504836. Cross-references include Baldwin B7349 and Wix 57202.
What are common parts needed for the 7330?
Common parts needed for the John Deere 7330 include engine oil filters, fuel filters, air filters, hydraulic filters, belts, hydraulic seals, steering components, and clutch parts (if applicable).

RE31701 - Rear Axle Shaft Seal
SKU: RE31701
61 in stock

JD8210 - TIMKEN CUP
SKU: JD8210
208 in stock

RE214056 - Ball Joint (LH)
SKU: RE214056
66 in stock

RE214055 - Ball Joint (RH)
SKU: RE214055
38 in stock

R120499 - Tapered Roller Bearing Cone
SKU: R120499
20 in stock

R117258 - Front Axle Pivot Bushing
SKU: R117258
54 in stock

L76471 - MFWD Pivot Bushing
SKU: L76471
163 in stock

AR63590 - Short Tie Rod
SKU: AR63590
17 in stock

AR26480 - Seal
SKU: AR26480
90 in stock

AL209601 - LH / RH Tie Rod End Outer
SKU: AL209601
7 in stock

AL209419 - RH/LH Steering Cylinder Ball Joint
SKU: AL209419
141 in stock

AL178284 - RH / LH Tie Rod Ball Joint
SKU: AL178284
169 in stock

AL178283 - LH / RH Tie Rod End Outer
SKU: AL178283
144 in stock

AL160111 - Tie Rod Assembly
SKU: AL160111
48 in stock

AL113460 - Tie Rod Boot
SKU: AL113460
38 in stock

AL113451 - Tie Rod Boot
SKU: AL113451
153 in stock

U41966 - Durometer 75 (4/Pack) .103" Thick O-Ring; 1.424" ID X 1.630" OD
SKU: U41966
269 in stock

U12331 - Durometer 75 (4/Pack) .139" Thickness O-Ring; 2.734" ID X 3.012" OD
SKU: U12331
376 in stock

U12037 - Durometer 75 (5/Pack) .139" Thickness O-Ring; 1.296" ID X 1.574" OD
SKU: U12037
615 in stock

U11326 - 5/pack Durometer 75 O-Ring; 1.114" ID X 1.254" OD X .070" Thick
SKU: U11326
570 in stock

T59014 - Durometer 90 (5/Pack) .139" Thick O-Ring; .984" ID X 1.262" OD
SKU: T59014
2750 in stock

T42302 - Durometer 70 (1/Pack) .103" Thick O-Ring; 3.987" ID X 4.193" OD
SKU: T42302
385 in stock

R76617 - Durometer 75 (5/Pack) .070" Thick O-Ring; .489" ID X .629" OD
SKU: R76617
280 in stock

R65397 - Durometer 75 (2/Pack) .103" Thick O-Ring; .487" ID X .693" OD
SKU: R65397
548 in stock
