John Deere 7310R Tractor Parts
7310R parts and accessories
The John Deere 7310R tractor, manufactured from 2011 to 2015, is a powerful workhorse for modern farming. Featuring a 9.0L PowerTech diesel engine producing around 310 engine horsepower and approximately 255 PTO horsepower, it quickly became a favorite for its versatility and ability to handle a wide range of agricultural tasks. Farmers appreciated its robust design and advanced technology for increased productivity.
The John Deere 7310R tractor was introduced as part of the John Deere 7R series, produced from 2011 to 2015. This series aimed to provide farmers with a balance of power, technology, and comfort. The 7310R is powered by a John Deere PowerTech 9.0L six-cylinder diesel engine, delivering around 310 engine horsepower (231 kW). Its displacement is 548 cubic inches. It utilizes a fuel-efficient diesel system. Transmission options typically included the Infinitely Variable Transmission (IVT) or the AutoPowr transmission, offering seamless speed adjustments. The PTO horsepower is approximately 255 hp (190 kW) with both 540/1000 RPM options. The hydraulic system boasts a high capacity, often exceeding 40 GPM (151 lpm), with multiple remote valves available for implements. It's equipped with a Category III/IIIN 3-point hitch, providing significant lift capacity for heavy implements. The 7310R is commonly used for row crop operations, hay production, livestock management, and primary/secondary tillage. What distinguishes the 7310R within the 7R lineup is its horsepower rating, placing it in the middle of the range while offering a combination of power and maneuverability suitable for a variety of farm sizes.
Specifications
| Engine | John Deere PowerTech 9.0L 310 HP Diesel |
|---|---|
| PTO HP | 255 HP @ 540/1000 RPM |
| Transmission | IVT or AutoPowr Infinitely Variable |
| Hydraulics | 43.5 GPM, Up to 5 remotes |
| 3-Point Hitch | Category III/IIIN, 14,770 lbs |
| Fuel Capacity | 161 gallons |
| Weight | 24,690 lbs |
| Years Produced | 2011-2015 |
Maintenance Tips
- Check and change the engine oil and filter every 500 hours using John Deere-approved oil and filters for optimal engine life.
- Inspect hydraulic fluid levels and filter condition regularly (every 250 hours) to prevent contamination and ensure smooth operation of hydraulic implements.
- Use fuel additives and drain water separators to prevent fuel system issues, especially during cold weather or extended storage.
- Before seasonal storage, thoroughly clean the tractor, lubricate all grease fittings, and protect tires from direct sunlight to prevent deterioration.
History & Background
The John Deere 7310R was introduced in 2011 as part of the redesigned 7R series, offering improved power and efficiency compared to its predecessors. It built upon John Deere's reputation for reliable and technologically advanced agricultural equipment. The 7310R played a significant role in modern farming by providing a versatile platform for various tasks.
Frequently Asked Questions
What engine is in the John Deere 7310R?
The John Deere 7310R is equipped with a John Deere PowerTech 9.0L six-cylinder diesel engine producing 310 horsepower.
What is the PTO horsepower on a 7310R?
The PTO horsepower on a John Deere 7310R is approximately 255 horsepower with both 540 and 1000 RPM options.
What oil filter fits the 7310R?
The recommended oil filter for the John Deere 7310R is typically a John Deere filter part number RE504836. Cross-references include Fleetguard LF9009 and Baldwin B7349.
What are common parts needed for the 7310R?
Common wear parts for the John Deere 7310R include engine oil filters, fuel filters, air filters, hydraulic filters, belts, hydraulic cylinder seal kits, steering components (tie rod ends, ball joints), and clutch components (if equipped with a non-IVT transmission).

T13119 - Durometer 75 (10/Pack) .103" Thick O-Ring; .737" ID X .943" OD
SKU: T13119
140 in stock

R72654 - Snap; 25/Pack Ring
SKU: R72654
925 in stock

R63185 - Durometer 70 (1/Pack) .139" Thick O-Ring; 1.171" ID X 1.449" OD
SKU: R63185
271 in stock

R62070 - Durometer 70 (5/Pack) .070" Thick O-Ring; .989" ID X 1.129" OD
SKU: R62070
185 in stock

R56751 - Durometer 75 (2/Pack) O-Ring; .924" ID X 1.156" OD X .116" Thick
SKU: R56751
252 in stock

R56464 - Durometer 75 (5/Pack) .103" Thick O-Ring; .549" ID X .755" OD
SKU: R56464
660 in stock

R56461 - Durometer 75 (5/Pack) .139" Thick O-Ring; 1.109" ID X 1.387" OD
SKU: R56461
455 in stock

R27928 - Durometer 75 (25/Pack) .070" Thick O-Ring; .926" ID X 1.066" OD
SKU: R27928
450 in stock

R27564 - Durometer 70 (10/Pack) .070" Thick O-Ring; .739" ID X .879" OD
SKU: R27564
250 in stock

R27149 - Durometer 75 (5/Pack) .139" Thick O-Ring; .921" ID X 1.199" OD
SKU: R27149
235 in stock

R26871 - Snap Ring
SKU: R26871
801 in stock

R26282 - Durometer 70 (4/Pack) .139" Thick O-Ring; 2.109" ID X 2.387" OD
SKU: R26282
136 in stock

R222761 - Durometer 90 (1/Pack) O-Ring; 1.239" ID X 1.379" OD
SKU: R222761
773 in stock

R21722 - Durometer 90 (5/Pack) .139" Thick O-Ring; .796" ID X 1.074" OD
SKU: R21722
135 in stock

R1225R - Durometer 75 (5/ Pack) O-Ring; 1.171" ID X 1.449" OD X .139" Thick
SKU: R1225R
565 in stock

R112857 - Durometer 75 (1/Pack) .103" Thick O-Ring; 2.550" ID X 2.756" OD
SKU: R112857
451 in stock

R106663 - Durometer 75 (5/Pack) .070" Thick O-Ring; 1.176" ID X 1.316" OD
SKU: R106663
335 in stock

P47889 - Durometer 70 (2/Pack) .103" Thick O-Ring; .799" ID X 1.005" OD
SKU: P47889
862 in stock

H133106 - Snap (1/Pack) Ring
SKU: H133106
684 in stock

F3353R - Durometer 75 (10/Pack) O-Ring; .362" ID X .568" OD X .103" Thick
SKU: F3353R
720 in stock

F1870R - Durometer 70 (5/Pack) O-Ring; 2.234" ID X 2.512" OD X .139" Thick
SKU: F1870R
655 in stock

B2762R - Durometer 70 (10/Pack) .139" Thick O-Ring; .734" ID X 1.012" OD
SKU: B2762R
1620 in stock

51M7090 - Durometer 75 O-Ring; .528" ID X .716" OD X .094" Thick
SKU: 51M7090
861 in stock

38H5035 - Elbow Fitting
SKU: 38H5035
94 in stock
