John Deere 7185J Tractor Parts
7185J parts and accessories
The John Deere 7185J, produced from 2011 to 2017, is a robust agricultural tractor known for its power and reliability. Powered by a John Deere PowerTech 6.8L diesel engine producing 185 engine horsepower and a PTO horsepower of 150, this tractor quickly became a favorite for demanding field work. Farmers valued its efficiency and durability in various applications.
The John Deere 7185J was introduced as part of the John Deere J Series tractor lineup, offering a blend of performance and simplicity for modern farming operations. Production ran from 2011 to 2017. Under the hood lies a John Deere PowerTech 6068H diesel engine, a 6.8-liter (414 cu in) inline six-cylinder, rated at 185 engine horsepower. This diesel engine delivers high torque and fuel efficiency. The transmission is a 20F/20R PowrQuad Plus transmission providing ample speed options for various field conditions. PTO horsepower is rated at 150 HP, with options for both 540 and 1000 RPM PTO speeds, catering to a wide range of implements. The hydraulic system boasts a capacity of approximately 29.1 GPM, allowing for efficient operation of hydraulic implements. It typically features 3 rear remotes. The 3-point hitch is a Category II/III, providing a lift capacity of around 7,874 lbs. The 7185J finds common application in row crop operations, hay production, livestock management, and various tillage tasks. It distinguishes itself from smaller models in the lineup by offering higher horsepower and heavier-duty components, suitable for more intensive farming operations, while remaining less technologically complex than some of John Deere's premium offerings.
Specifications
| Engine | John Deere PowerTech 6068H 185 HP Diesel |
|---|---|
| PTO HP | 150 HP @ 540/1000 RPM |
| Transmission | PowrQuad Plus 20F/20R |
| Hydraulics | 29.1 GPM, 3 remotes |
| 3-Point Hitch | Category II/III, 7,874 lbs |
| Fuel Capacity | 74 gallons |
| Weight | 14,330 lbs |
| Years Produced | 2011-2017 |
Maintenance Tips
- Engine Oil and Filter: Change the engine oil and filter every 250-300 hours, using the recommended John Deere oil type and filter. Regularly check the oil level.
- Hydraulic System: Inspect hydraulic fluid levels and filters every 500 hours. Replace hydraulic filters as needed to maintain system performance and prevent contamination.
- Fuel System: Use clean, high-quality diesel fuel and replace the fuel filter every 500 hours. Check for water or sediment in the fuel tank and drain as necessary.
- Seasonal Storage: Before storing the tractor for the off-season, fill the fuel tank to prevent condensation, add fuel stabilizer, and grease all lubrication points to prevent corrosion. Disconnect the battery or use a trickle charger.
History & Background
The John Deere 7185J was introduced in 2011 as part of the J series, aimed at providing a robust and reliable tractor for a variety of agricultural tasks. There were no major redesigns during its production run, it maintained a consistent feature set throughout its years. The 7185J filled an important role in the John Deere lineup, offering a balance of power, simplicity, and value for farmers.
Frequently Asked Questions
What engine is in the John Deere 7185J?
The John Deere 7185J is equipped with a John Deere PowerTech 6068H, a 6.8-liter (414 cubic inch) six-cylinder diesel engine producing 185 engine horsepower.
What is the PTO horsepower on a 7185J?
The PTO horsepower on the John Deere 7185J is rated at 150 HP. It offers both 540 and 1000 RPM PTO speed options.
What oil filter fits the 7185J?
The John Deere 7185J typically uses a John Deere oil filter part number RE504836 or similar. Cross-references include Baldwin BD7154, Fleetguard LF9009, and Wix 57712.
What are common parts needed for the 7185J?
Common wear parts for the John Deere 7185J include engine oil filters, fuel filters, air filters, hydraulic filters, fan belts, hydraulic cylinder seals, steering components (tie rod ends), and clutch disc or pressure plate components (if applicable).

RE504914 - Engine Oil Pump
SKU: RE504914
29 in stock

RE501456 - Overhaul without Seals Gasket Set
SKU: RE501456
3 in stock

RE500608 - Fracture Type Connecting Rod
SKU: RE500608
10 in stock

RE500005 - Oil Fill Cap
SKU: RE500005
115 in stock

RE48786 - Pencil Injector
SKU: RE48786
Out of stock

RE31617 - Valve Seal
SKU: RE31617
647 in stock

RE31323 - Valve Rotator
SKU: RE31323
74 in stock

RE170084 - Belt; Accessory Tensioner
SKU: RE170084
16 in stock

RE167207 - Oil Pressure Sensor
SKU: RE167207
56 in stock

R80135 - Oil Filler Cap Gasket
SKU: R80135
29 in stock

U41966 - Durometer 75 (4/Pack) .103" Thick O-Ring; 1.424" ID X 1.630" OD
SKU: U41966
269 in stock

U12331 - Durometer 75 (4/Pack) .139" Thickness O-Ring; 2.734" ID X 3.012" OD
SKU: U12331
376 in stock

U12037 - Durometer 75 (5/Pack) .139" Thickness O-Ring; 1.296" ID X 1.574" OD
SKU: U12037
615 in stock

U10289 - Durometer 75 (10/Pack) .139" Thick O-Ring; 1.484" ID X 1.762" OD
SKU: U10289
1270 in stock

R72654 - Snap; 25/Pack Ring
SKU: R72654
925 in stock

R459R - Durometer 70 (25/Pack) .103" Thick O-Ring; .549" ID X .755 OD
SKU: R459R
625 in stock

P47889 - Durometer 70 (2/Pack) .103" Thick O-Ring; .799" ID X 1.005" OD
SKU: P47889
862 in stock

F1870R - Durometer 70 (5/Pack) O-Ring; 2.234" ID X 2.512" OD X .139" Thick
SKU: F1870R
655 in stock

B2762R - Durometer 70 (10/Pack) .139" Thick O-Ring; .734" ID X 1.012" OD
SKU: B2762R
1620 in stock

A5598R - Durometer 70 (2/Pack) .210" Thick O-Ring; 3.600" ID X 4.020" OD
SKU: A5598R
234 in stock

40M7042 - External Snap; 24/Pack Ring
SKU: 40M7042
456 in stock

40M5099 - Internal Snap; 10/Pack Ring
SKU: 40M5099
1990 in stock

R252371 - Fan Drive Belt
SKU: R252371
168 in stock

JD9954 - Roller Bearing
SKU: JD9954
456 in stock
