John Deere 4955 Tractor Parts
4955 parts and accessories
The John Deere 4955 tractor, manufactured from 1988 to 1992, quickly became a favorite among farmers for its power and reliability. It was powered by a 7.6L John Deere diesel engine, delivering around 225 horsepower. Its high PTO horsepower made it ideal for running demanding implements, contributing significantly to its popularity in row crop and tillage applications.
The John Deere 4955 was part of the John Deere 55 Series tractors, produced from 1988 to 1992. These tractors were designed to offer increased power and improved operator comfort compared to previous models. The 4955 featured a 7.6L (466 cubic inch) John Deere diesel engine producing approximately 225 engine horsepower. The available transmissions were typically a 15-speed PowerShift transmission, offering smooth and efficient gear changes under load. It boasted a PTO horsepower of around 180 HP, available in both 540 and 1000 RPM configurations. The hydraulic system offered a capacity of approximately 30 GPM, powering multiple remote hydraulic valves. The 3-point hitch was a Category II/III, capable of lifting substantial implements for various agricultural tasks. The 4955 was commonly used for row crop operations, heavy tillage, hay production, and livestock feeding, distinguishing itself from smaller models with its increased power and versatility, and from larger models with its nimbleness and fuel economy.
Specifications
| Engine | John Deere 7.6L 225 HP Diesel |
|---|---|
| PTO HP | 180 HP @ 540/1000 RPM |
| Transmission | PowerShift 15-speed |
| Hydraulics | 30 GPM, 3-4 remotes |
| 3-Point Hitch | Category II/III, 7500 lbs lift capacity |
| Fuel Capacity | 90 gallons |
| Weight | 18,300 lbs |
| Years Produced | 1988-1992 |
Maintenance Tips
- Engine Oil & Filter: Change engine oil and filter every 250 hours of operation using the recommended John Deere oil and filter. Regular changes maintain engine lubrication and prevent wear.
- Hydraulic System: Inspect hydraulic fluid levels regularly and change the hydraulic filter every 500 hours. Use only recommended hydraulic fluid to prevent damage to seals and components. Check for leaks around hoses and fittings.
- Fuel System: Use clean, high-quality diesel fuel. Replace the fuel filter every 250 hours to prevent fuel system clogging. Drain any water or sediment from the fuel tank regularly.
- Seasonal Storage: Before storing the tractor for the off-season, fill the fuel tank to prevent condensation, change the engine oil and filter, grease all lubrication points, and disconnect the battery. Store in a dry location to prevent rust and corrosion.
History & Background
The John Deere 4955 was introduced in 1988 as part of the 55 Series, representing an evolution in tractor design and performance. It provided a significant upgrade in power and comfort compared to the models it replaced. The 4955 became a popular choice for farmers seeking a reliable and versatile tractor for various agricultural operations.
Frequently Asked Questions
What engine is in the John Deere 4955?
The John Deere 4955 is equipped with a 7.6L (466 cubic inch) John Deere diesel engine, producing approximately 225 horsepower.
What is the PTO horsepower on a 4955?
The PTO horsepower on the John Deere 4955 is approximately 180 HP, available in both 540 and 1000 RPM configurations.
What oil filter fits the 4955?
The recommended oil filter for the John Deere 4955 is a John Deere AR51747. Common cross-references include Wix 51791 and Fram PH3600.
What are common parts needed for the 4955?
Common wear parts for the John Deere 4955 include engine oil filters, fuel filters, hydraulic filters, belts (fan, alternator), hydraulic cylinder seal kits, steering cylinder repair kits, and clutch components (if equipped with a clutch).

R77551 - Durometer 75 (12/Pack) .070" Thick O-Ring; .208" ID X .348" OD
SKU: R77551
1908 in stock

R76617 - Durometer 75 (5/Pack) .070" Thick O-Ring; .489" ID X .629" OD
SKU: R76617
280 in stock

R72654 - Snap; 25/Pack Ring
SKU: R72654
925 in stock

R65397 - Durometer 75 (2/Pack) .103" Thick O-Ring; .487" ID X .693" OD
SKU: R65397
548 in stock

R62070 - Durometer 70 (5/Pack) .070" Thick O-Ring; .989" ID X 1.129" OD
SKU: R62070
185 in stock

R56464 - Durometer 75 (5/Pack) .103" Thick O-Ring; .549" ID X .755" OD
SKU: R56464
660 in stock

R56462 - Durometer 75 (5/Pack) .139" Thick O-Ring; .734" ID X 1.012" OD
SKU: R56462
270 in stock

R51603 - Durometer 70 (10/Pack) O-Ring; .612" ID X .818" OD X .103" Thick
SKU: R51603
290 in stock

R459R - Durometer 70 (25/Pack) .103" Thick O-Ring; .549" ID X .755 OD
SKU: R459R
625 in stock

R26282 - Durometer 70 (4/Pack) .139" Thick O-Ring; 2.109" ID X 2.387" OD
SKU: R26282
136 in stock

R21722 - Durometer 90 (5/Pack) .139" Thick O-Ring; .796" ID X 1.074" OD
SKU: R21722
135 in stock

H133106 - Snap (1/Pack) Ring
SKU: H133106
684 in stock

F3353R - Durometer 75 (10/Pack) O-Ring; .362" ID X .568" OD X .103" Thick
SKU: F3353R
720 in stock

A5598R - Durometer 70 (2/Pack) .210" Thick O-Ring; 3.600" ID X 4.020" OD
SKU: A5598R
234 in stock

WL7882 - Red LED Tail / Warning Light
SKU: WL7882
273 in stock

WL7610 - Trapezoid LED Light Assembly
SKU: WL7610
63 in stock

WL7606 - Flood LED Light Assembly
SKU: WL7606
365 in stock

WL4460 - Hi / Low LED Sealed Beam
SKU: WL4460
309 in stock

WL2116 - 4 1/2" Diameter Trapezoid LED Sealed Beam
SKU: WL2116
364 in stock

WL1116 - 4 1/2" Diameter Flood LED Sealed Beam
SKU: WL1116
837 in stock

RE340681 - Flood LED; Rectangular Worklamp
SKU: RE340681
530 in stock

RE336112 - Trapezoid Worklight; Round LED Lamp
SKU: RE336112
364 in stock

RE336111 - Flood Worklight; LED Lamp
SKU: RE336111
837 in stock

RE306510 - Flood LED; Rectangular Worklamp
SKU: RE306510
530 in stock
