John Deere 2020 Tractor Parts

Jump to Parts

The John Deere 2020 was a versatile utility tractor produced from 1964 to 1972, powered by a reliable John Deere gasoline or diesel engine offering around 51-57 horsepower. With a PTO horsepower of approximately 45-50, the 2020 became a popular choice for farmers due to its manageable size, good power-to-weight ratio, and adaptability to various implements.

Introduced in 1964, the John Deere 2020 was designed as a general-purpose utility tractor, replacing earlier models in the John Deere lineup. Production continued until 1972. Engine options included the John Deere 3.0L (180 cu in) 4-cylinder gasoline engine producing around 57 hp, or the John Deere 2.9L (179 cu in) 4-cylinder diesel engine producing around 51 hp. The tractor featured a gear-type transmission, typically offering 8 forward and 2 reverse speeds, providing a good range for various tasks. The PTO delivered around 45-50 hp at 540 RPM. Hydraulic capacity was approximately 15 GPM, often equipped with one or two remote valves. The 2020 came standard with a Category I 3-point hitch, capable of lifting around 2,500 lbs. Common applications included row crop work, hay baling, livestock feeding, and light tillage operations. Its slightly larger size and increased power compared to the smaller John Deere models, combined with its lighter weight and maneuverability compared to larger row-crop tractors, made it a well-rounded option for many farms.

Specifications

Engine	John Deere 57 HP Gas / 51 HP Diesel
PTO HP	45-50 HP @ 540 RPM
Transmission	Gear, 8 Forward / 2 Reverse
Hydraulics	15 GPM, 1-2 remotes
3-Point Hitch	Category I, 2500 lbs
Fuel Capacity	19 gallons
Weight	5050 lbs
Years Produced	1964-1972

Maintenance Tips

Engine Oil & Filter: Change the engine oil and filter every 125-250 hours of operation, depending on the operating conditions. Use the recommended oil type and a quality filter to ensure optimal engine protection.
Hydraulic System: Regularly check the hydraulic fluid level and inspect for leaks. Replace the hydraulic filter every 500 hours or as recommended by the manufacturer to prevent contamination and maintain proper hydraulic performance.
Fuel System: Use clean fuel and regularly check the fuel filter/water separator. Drain any accumulated water to prevent fuel system issues. Consider adding a fuel stabilizer during seasonal storage.

History & Background

The John Deere 2020 was launched in 1964 as part of John Deere's new generation of tractors. It offered improved ergonomics and hydraulics compared to its predecessors. The 2020 played a significant role in popularizing the utility tractor segment, providing a versatile and affordable option for a wide range of farming operations.

Frequently Asked Questions

What engine is in the John Deere 2020?

The John Deere 2020 came with either a 57 HP John Deere 3.0L (180 cu in) 4-cylinder gasoline engine or a 51 HP John Deere 2.9L (179 cu in) 4-cylinder diesel engine.

What is the PTO horsepower on a 2020?

The PTO horsepower on a John Deere 2020 is approximately 45-50 HP at 540 RPM.

What oil filter fits the 2020?

The John Deere 2020 typically uses a John Deere filter part number AR50041 or equivalent. Cross-references include Wix 51258, Fram PH3600, and NAPA 1258. Always verify fitment before installation.

What are common parts needed for the 2020?

Commonly needed parts for the John Deere 2020 include engine oil filters, fuel filters, air filters, hydraulic filters, fan belts, radiator hoses, hydraulic cylinder seal kits, steering components (tie rod ends, steering cylinders), clutch discs, and PTO shaft seals.

Showing 265-288 of 588 products

Sort by: