John Deere T670 Combine Parts
T670 parts and accessories
The John Deere T670 combine, manufactured from 2012 to 2020, is a high-capacity conventional combine known for its efficient grain handling. Powered by a John Deere PowerTech engine producing upwards of 402 HP, this combine offered header widths up to 40 feet. Farmers favored the T670 for its balance of throughput, grain quality, and straw management capabilities, especially in small grains.
The John Deere T670 was introduced in 2012 as part of John Deere's T-Series combine lineup and remained in production until 2020. It was designed to deliver high capacity harvesting with a conventional threshing system. Powering the T670 is a John Deere PowerTech 9.0L 6-cylinder diesel engine, producing a maximum of 402 horsepower. This engine provides ample power for threshing, separating, and cleaning even in challenging conditions. The T670 features a conventional threshing system with a large cylinder width, providing aggressive threshing action. Its grain tank holds approximately 330 bushels, and it can unload grain at a rate of up to 3.3 bushels per second (198 bu/min). The combine is compatible with a range of headers, from narrow platforms for small grains to wide row-crop heads, generally up to 40 feet. Chopper and spreader options allow for customizable residue management. The combine features a comfortable cab with advanced technology for monitoring performance and optimizing settings. The John Deere T670 is well-suited for harvesting wheat, barley, soybeans, and other small grains, providing excellent grain quality and efficient residue management.
Specifications
| Engine | John Deere PowerTech 9.0L 402 HP Diesel |
|---|---|
| Separator Type | Conventional - 66-inch cylinder width |
| Grain Tank | 330 bushels |
| Unloading Rate | 198 bu/min |
| Header Widths | Up to 40 ft |
| Fuel Capacity | 211 gallons |
| Weight | 34,000 lbs |
| Years Produced | 2012-2020 |
Maintenance Tips
- Concave Adjustments: Regularly inspect and adjust concave clearance based on crop type and condition to ensure optimal threshing and minimize grain damage.
- Belt and Chain Tension: Check belt and chain tension frequently, especially during initial operation, and adjust as needed to prevent slippage and premature wear.
- Sieve and Chaffer Cleaning: Clean the sieves and chaffer regularly to remove debris and maintain optimal airflow for efficient grain cleaning.
- Bearing Greasing: Follow the recommended greasing schedule for all bearings to ensure proper lubrication and prevent failure. Pay close attention to bearings in high-wear areas like the header and threshing unit.
History & Background
The John Deere T670 was introduced in 2012 as a key model in the T-Series combine lineup, offering a conventional threshing solution for farmers seeking high capacity and grain quality. Throughout its production run, the T670 remained a respected and reliable combine, contributing significantly to John Deere's legacy in harvesting technology.
Frequently Asked Questions
What engine is in the John Deere T670?
The John Deere T670 is equipped with a John Deere PowerTech 9.0L 6-cylinder diesel engine producing a maximum of 402 horsepower.
What is the grain tank capacity on a T670?
The grain tank capacity on a John Deere T670 is approximately 330 bushels, with an unloading rate of up to 198 bushels per minute.
What type of separator does the T670 have?
The John Deere T670 features a conventional threshing system with a 66-inch wide cylinder for effective grain separation.
What are common parts needed for the T670?
Common wear parts for the John Deere T670 include concaves, rasp bars, belts, chains, bearings, auger fingers, and sickle sections for the header.

H135475 - Auger Drive Bearing
SKU: H135475
182 in stock

H131675 - Grain Tank Window
SKU: H131675
11 in stock

H131639 - Upper Tailings Auger Housing Paddle
SKU: H131639
10 in stock

H130137 - Vertical Unloader Gear Case Housing
SKU: H130137
Out of stock

DE20711 - Vertical Unloading Auger Gear Set
SKU: DE20711
18 in stock

CE18278 - Horizontal Unloading Auger Drive Gear Case Shaft-Pinion
SKU: CE18278
32 in stock

AN15237 - Idler Assy
SKU: AN15237
84 in stock

AH98118 - Seal
SKU: AH98118
26 in stock

AH97031 - Flat Idler
SKU: AH97031
114 in stock

AH90963 - Shaft Seal Assy
SKU: AH90963
123 in stock

AH220872 - Moisture Sensor Actuator
SKU: AH220872
Out of stock

AH166639 - Offset Link
SKU: AH166639
59 in stock

AH166638 - Attachment Chain Link
SKU: AH166638
70 in stock

AH164349-WP - Mass Flow Sensor Bracket Wear Plate
SKU: AH164349-WP
122 in stock

AH163056 - Bearing Assy
SKU: AH163056
18 in stock

AH128075 - Unloading Auger Countershaft Drive Sprocket
SKU: AH128075
58 in stock

AH125080 - Vertical Auger Lower Gear Case Sprocket
SKU: AH125080
12 in stock

R64197 - Hi-Lo Clutch Plate
SKU: R64197
228 in stock

R39322 - Clutch / Brake Sealing Ring
SKU: R39322
130 in stock

R39304 - Packing (2 PK) Washer
SKU: R39304
383 in stock
JD8159 - BEARING
SKU: JD8159
40 in stock

AH215111 - Brake Fluid Reservoir Assy
SKU: AH215111
81 in stock

R87561 - Camshaft Bearing
SKU: R87561
102 in stock

R74008 - Connecting Rod Bushing
SKU: R74008
257 in stock
