John Deere S650 Combine Parts
S650 parts and accessories
The John Deere S650 combine, manufactured from 2012-2016, delivers reliable performance in the field. Boasting approximately 335 engine HP and available header widths up to 40 feet, this rotary combine was a popular choice for farmers looking for efficient grain harvesting. Its robust design and advanced features made it a strong contender for wheat, corn, and soybean harvesting.
The John Deere S650 was introduced as part of the S600 series combines in 2012, offering a mid-sized option with impressive capabilities. It was produced through 2016. Powering the S650 is a John Deere PowerTech 9.0L engine, producing approximately 335 horsepower. This engine provides the necessary power to handle demanding harvesting conditions. The S650 utilizes a single rotor separator system designed for efficient grain separation and minimal grain loss. The grain tank capacity is around 300 bushels, allowing for extended harvesting periods before unloading. The unloading auger boasts a rate of approximately 3.0 bushels per second (180 bu/min). Available header widths range from 30 to 40 feet, allowing farmers to match the combine to their specific field sizes and crop types. Chopper and spreader options are available to manage residue effectively. The cab features enhanced comfort and technology, including advanced monitoring systems and operator controls. The S650 excels at harvesting a variety of crops, including wheat, corn, soybeans, and other small grains. Its versatility and efficiency make it a valuable asset for any farming operation.
Specifications
| Engine | John Deere PowerTech 9.0L 335 HP Diesel |
|---|---|
| Separator Type | Rotary - Single Rotor |
| Grain Tank | 300 bushels |
| Unloading Rate | 180 bu/min |
| Header Widths | 30-40 ft |
| Fuel Capacity | 250 gallons |
| Weight | 32,000 lbs (approximate) |
| Years Produced | 2012-2016 |
Maintenance Tips
- Concave Adjustments: Regularly inspect and adjust concave clearance based on the crop being harvested to optimize threshing and minimize grain damage.
- Belt and Chain Tension: Check belt and chain tension frequently and adjust as needed to prevent slippage and premature wear. Proper tension ensures efficient power transmission.
- Sieve and Chaffer Cleaning: Clean sieves and chaffers regularly to remove debris and ensure proper air flow for efficient grain cleaning.
- Bearing Greasing: Grease all bearings according to the manufacturer's recommendations. Proper lubrication extends bearing life and prevents costly breakdowns.
History & Background
The John Deere S650 was introduced in 2012 as part of the S600 series, representing a significant advancement in rotary combine technology. It offered a balance of power, capacity, and efficiency, making it a popular choice among farmers. While not subject to major redesigns during its production run, continuous improvements were implemented to enhance performance and reliability.
Frequently Asked Questions
What engine is in the John Deere S650?
The John Deere S650 is equipped with a John Deere PowerTech 9.0L diesel engine, producing approximately 335 horsepower.
What is the grain tank capacity on a S650?
The grain tank capacity of the John Deere S650 is approximately 300 bushels. The unloading rate is around 180 bushels per minute.
What type of separator does the S650 have?
The John Deere S650 utilizes a single rotor separator system for efficient grain separation.
What are common parts needed for the S650?
Common wear parts for the S650 include concaves, rasp bars, belts, chains, bearings, auger fingers, and sickle sections for the header.

H206716 - Concave Latch Mechanism Retainer
SKU: H206716
219 in stock

H206715 - Concave Latch Mechanism Handle
SKU: H206715
91 in stock

H177647 - Latch Bracket
SKU: H177647
28 in stock

H165408 - Backup Strip
SKU: H165408
114 in stock

H156272 - Small Grain Concave Wire
SKU: H156272
790 in stock

BH84308 - Concave; For Round Bar Concaves Insert Bars
SKU: BH84308
19 in stock

AXE28958-HW - Front/Middle/Rear (Small Grain): Half-Width Concave
SKU: AXE28958-HW
22 in stock

AXE28958 - Middle/Rear (Small Grain) Concave
SKU: AXE28958
34 in stock

AXE28957-HW - Front/Middle/Rear (Round Bar); Half-Width Concave
SKU: AXE28957-HW
50 in stock

AXE28957 - Extended Wear Round Bar; Middle/Rear Concave
SKU: AXE28957
33 in stock

AXE28955 - Extended Wear Round Bar; Front Concave
SKU: AXE28955
18 in stock

AXE28812 - Front (Small Grain) Concave
SKU: AXE28812
26 in stock

AH216677 - (Set of 3) Hardened For Bullet Rotor Rear Threshing Element
SKU: AH216677
239 in stock

AH216674 - Set of 3 (Bullet Rotor) High Wear Threshing Element; 1st Row; Corn & Grain Kit
SKU: AH216674
30 in stock

AH213902 - Bearing W/ Housing
SKU: AH213902
81 in stock

AH209091HB - High Wear Large Wire Helical Bar; Middle/Rear Concave
SKU: AH209091HB
18 in stock

AH209091 - Corn & Soybean) Middle/Rear (High Wear Concave
SKU: AH209091
16 in stock

AH209090 - Corn & Soybean) Front (High Wear Concave
SKU: AH209090
15 in stock

AH208966 - Vane Transport; Feed Section Cover
SKU: AH208966
41 in stock

AH207851HB - High Wear Small Wire Helical Bar; Middle/ Rear Concave
SKU: AH207851HB
9 in stock

AH207851 - Middle/ Rear; High Wear (Small Grain) Concave
SKU: AH207851
58 in stock

AH207850 - Front; High Wear Concave
SKU: AH207850
15 in stock

AH205488 - Middle/Rear (Small Grain) Concave
SKU: AH205488
24 in stock

AH205260HB - Middle/ Rear Concave
SKU: AH205260HB
6 in stock
