John Deere 9600-MAXIMIZER Combine Parts

Jump to Parts

The John Deere 9600 MAXIMIZER, produced from 1989 to 1997, was a workhorse on farms across North America. Powered by a robust engine delivering around 235 HP, it offered header widths up to 30 feet for efficient harvesting. Its conventional separator design, known for its reliability, contributed to the 9600's popularity among farmers harvesting wheat, corn, and soybeans.

The John Deere 9600 MAXIMIZER combine was introduced in 1989 as part of the MAXIMIZER series and remained in production until 1997. It replaced earlier John Deere models and offered increased capacity and efficiency. The 9600 was powered by a John Deere 6-cylinder diesel engine, typically rated around 235 horsepower with a displacement of approximately 7.6 liters (466 cubic inches). The separator system utilized a conventional cylinder and concave arrangement, with a 66-inch wide cylinder. The grain tank capacity was approximately 205 bushels, and the unloading auger delivered grain at a rate of around 65 bushels per minute. Available header widths ranged from 13 to 30 feet. Chopper and spreader options allowed for residue management, and the cab provided improved operator comfort and controls compared to previous models. The 9600 excelled in harvesting a variety of crops, including wheat, soybeans, corn, and other small grains. Its reliability and ease of maintenance made it a favorite among farmers.

Specifications

Engine	John Deere 6-Cylinder 235 HP 7.6L Diesel
Separator Type	Conventional - 66-inch Cylinder Width
Grain Tank	205 bushels
Unloading Rate	65 bu/min
Header Widths	13-30 ft
Fuel Capacity	150 gallons
Weight	24,000 lbs (approximate)
Years Produced	1989-1997

Maintenance Tips

Concave Adjustment: Regularly check and adjust concave clearance based on the crop being harvested to optimize threshing efficiency and minimize grain loss.
Belt and Chain Tension: Inspect all belts and chains for proper tension and wear. Replace worn belts and chains and adjust tension as needed to prevent slippage and damage.
Sieve and Chaffer Cleaning: Regularly clean sieves and chaffers to remove debris and ensure proper airflow for effective grain separation.
Bearing Greasing: Grease all bearings according to the manufacturer's recommendations to prevent premature wear and failure. Pay special attention to bearings in high-stress areas like the header and separator.
Pre-Season Preparation: Before each harvest season, thoroughly inspect the combine, lubricate all moving parts, and replace any worn or damaged components to minimize downtime during harvest.

History & Background

The John Deere 9600 MAXIMIZER was a key model in the evolution of combine harvesters, solidifying John Deere's reputation for reliable and efficient harvesting equipment. Introduced in 1989, it featured advancements in capacity and operator comfort. While the 9600 didn't undergo major redesigns during its production run, it remained a popular and dependable choice for farmers throughout the 1990s.

Frequently Asked Questions

What engine is in the John Deere 9600 MAXIMIZER?

The John Deere 9600 MAXIMIZER is powered by a John Deere 6-cylinder diesel engine with a displacement of 7.6 liters (466 cubic inches) and an approximate power output of 235 horsepower.

What is the grain tank capacity on a 9600 MAXIMIZER?

The grain tank capacity of the John Deere 9600 MAXIMIZER is approximately 205 bushels, with an unloading rate of around 65 bushels per minute.

What type of separator does the 9600 MAXIMIZER have?

The John Deere 9600 MAXIMIZER utilizes a conventional separator system with a 66-inch wide cylinder and concave arrangement.

What are common parts needed for the 9600 MAXIMIZER?

Common wear parts for the John Deere 9600 MAXIMIZER include concaves, rasp bars, belts, chains, bearings, auger fingers, and sickle sections. Regular replacement of these parts helps ensure optimal performance and minimizes downtime.

Showing 25-46 of 46 products

Sort by: