John Deere 7700 Combine Parts
The John Deere 7700 Combine, manufactured from 1977 to 1984, was a popular choice for farmers due to its reliable performance and efficient conventional threshing system. Powered by a John Deere diesel engine producing approximately 175 horsepower, it offered header widths up to 20 feet, making it suitable for a variety of grain harvesting operations. Its robust design contributed to its reputation for dependability in the field.
The John Deere 7700 combine was introduced in 1977 and remained in production until 1984, establishing itself as a workhorse for many farmers. It was powered by a John Deere 6-cylinder diesel engine, typically producing around 175 horsepower with a displacement of approximately 466 cubic inches. The 7700 utilized a conventional threshing system with a cylinder width of around 43 inches. Grain tank capacity was approximately 135 bushels, and the unloading auger could empty the tank at a rate of about 45 bushels per minute. Available header widths ranged from 13 to 20 feet. It also featured options for a straw chopper or spreader. The cab, while not as advanced as later models, provided a functional workspace for the operator. The 7700 excelled at harvesting a variety of crops, including wheat, soybeans, and corn, thanks to its adjustable threshing settings and header options.
Specifications
| Engine | John Deere 175 HP 466 cu. in. Diesel |
|---|---|
| Separator Type | Conventional - 43-inch cylinder width |
| Grain Tank | 135 bushels |
| Unloading Rate | 45 bu/min |
| Header Widths | 13-20 ft |
| Fuel Capacity | 75 gallons |
| Weight | Approximately 16,000 lbs |
| Years Produced | 1977-1984 |
Maintenance Tips
- Regularly inspect and adjust concave clearance to optimize threshing performance and minimize grain loss.
- Check belt and chain tension frequently, especially at the start of the season, to prevent slippage and premature wear.
- Clean sieves and chaffers daily to ensure proper separation and prevent plugging, which can reduce efficiency.
- Grease all bearings and lubrication points according to the manufacturer's recommendations to prevent premature failure and extend component life.
History & Background
Introduced in 1977, the John Deere 7700 replaced earlier models and provided increased capacity and efficiency. While there weren't major redesigns during its production run, John Deere continually refined components for improved reliability. The 7700 played a significant role in the transition towards larger, more productive combine harvesters.
Frequently Asked Questions
What engine is in the John Deere 7700?
The John Deere 7700 is equipped with a John Deere 6-cylinder diesel engine, typically producing around 175 horsepower with a displacement of approximately 466 cubic inches.
What is the grain tank capacity on a 7700?
The grain tank capacity of the John Deere 7700 is approximately 135 bushels, and the unloading rate is around 45 bushels per minute.
What type of separator does the 7700 have?
The John Deere 7700 utilizes a conventional threshing system with a 43-inch wide cylinder.
What are common parts needed for the 7700?
Common wear parts for the John Deere 7700 include concaves, rasp bars, belts, chains, bearings, auger fingers, and sickle sections.

R46903 - Camshaft Bearing
SKU: R46903
229 in stock

R46472 - Exhaust (Rear) Manifold
SKU: R46472
66 in stock

R45134 - Oil Pump Drive Gear
SKU: R45134
25 in stock

R44161 - Piston 1.50" Pin
SKU: R44161
34 in stock

R43883 - Intake (Std) Valve
SKU: R43883
62 in stock

R43751 - Turbo Mounting Gasket
SKU: R43751
27 in stock

R43724G - Turbo to Elbow (Special) Adapter Kit
SKU: R43724G
128 in stock

R43724 - Turbo to Elbow Adapter
SKU: R43724
31 in stock

R43681 - Exhaust Valve (Std) Insert
SKU: R43681
146 in stock

R43680 - Intake Valve (Std) Insert
SKU: R43680
55 in stock

R43679 - Exhaust (Std) Valve
SKU: R43679
154 in stock

R42173 - Connecting Rod Bushing
SKU: R42173
147 in stock

R41425 - Piston Pin
SKU: R41425
13 in stock

R40615 - Cylinder Liner
SKU: R40615
25 in stock

R34766 - Fuel Line Boot (25 pack) Clamp
SKU: R34766
Out of stock

R34765 - Fuel Line to Injector (12 pk) Boot
SKU: R34765
762 in stock

R34764 - Injector Washer
SKU: R34764
42 in stock

R30939 - Connecting Rod Bushing
SKU: R30939
557 in stock

R28811 - Flywheel Ring Gear
SKU: R28811
274 in stock

R28795 - Pre-Cleaner (10.5") Bowl
SKU: R28795
976 in stock

R26125 - Valve Spring
SKU: R26125
262 in stock

R26115 - Camshaft Plug
SKU: R26115
28 in stock

R26058 - Rear Cover Gasket
SKU: R26058
74 in stock

MX1062 - Oil Pump (Crank Driven) Repair Kit
SKU: MX1062
50 in stock
