Industrial Belts & V-Belts
Industrial Belts parts and accessories
Find industrial belt replacements for agricultural equipment, shop machinery, pumps, fans, compressors and other belt-driven systems. Compare belt construction and section, then confirm the exact fit with your equipment part number.
About the Industrial Belts
Industrial belts transfer rotary power between shafts through pulleys. The correct replacement depends on the belt profile, pulley groove, length, drive layout and operating conditions. A belt can look close and still ride too high or low in a sheave, slip under load or wear quickly if its section is wrong.\n\nWrapped classical V-belts use a fabric cover and are common in general-purpose A, B, C and D section drives. Narrow wedge belts such as 3V, 5V and 8V are designed for matching wedge sheaves. Cogged or raw-edge belts add notches to a compatible section to improve flexibility around smaller pulleys; the notches do not make one profile interchangeable with another. Aramid-reinforced belts use stronger tensile cords for applications that specify that construction.\n\nJ and K poly-rib belts have multiple lengthwise ribs for compact, multi-rib pulleys. AA, BB and CC double-angle belts can transmit power from both faces when the drive is designed for two-sided contact. SPA, SPB, SPC, SPZ and other metric profiles follow metric section designations, while variable-speed belts are made for adjustable-sheave drives. Metric, classical, wedge and poly-rib profiles must be matched to their own pulley geometry.\n\nUse the OEM belt number whenever possible. If it is unavailable, compare the old belt markings and measure the section and length using the belt manufacturer method. Inspect sheaves, alignment and tension during service; replacing a belt without correcting a worn pulley or misaligned drive can shorten the new belt life.
Industrial Belts Specifications
| Belt type | Profile and use | Browse |
|---|---|---|
| Wrapped V-belts | Fabric-covered classical sections for general-purpose drives. | A section · B section · C section |
| Wedge belts | Narrow 3V, 5V and 8V sections for matching wedge sheaves. | 3V · 5V · 8V |
| Cogged belts | Notched versions of specified profiles for flexible, compact drives. | AX · BX · 3VX |
| Aramid-reinforced | Reinforced tensile-cord construction when called for by the application. | A section · B section |
| Poly-rib | Multiple longitudinal ribs for compact multi-rib pulleys. | J poly-rib · K poly-rib |
| Double-angle | Two-sided V profiles for drives engaging both belt faces. | AA · BB · CC |
| Metric and variable-speed | Metric wedge sections and belts for adjustable-sheave drives. | SPA · SPB · Variable speed |
Industrial Belts Maintenance Tips
- Match the exact manufacturer number, belt section, length and pulley groove; do not substitute based on appearance alone.
- Inspect sheaves for wear, contamination and misalignment before installing a replacement belt.
- Set tension to the equipment specification and replace multi-belt sets together when the drive calls for matched belts.
Frequently Asked Questions
What is the difference between wrapped and cogged V-belts?
A wrapped belt has a fabric cover around its section. A cogged belt has notches on the underside of a compatible profile. Choose the construction and section specified for the drive; cogging does not make belt sections interchangeable.
Can I replace an industrial belt by matching its length?
Length alone is not enough. Confirm the cross-section, pulley groove, belt construction and effective length. The equipment manufacturer part number is the best starting point.
Are metric SP belts interchangeable with classical or wedge belts?
No. SPA, SPB, SPC and SPZ are metric section designations with matching pulley grooves. Classical and inch wedge profiles use different dimensions and are not interchangeable just because the belts look similar.
When should industrial belts be replaced as a set?
For a multi-belt drive specified for matched belts, replace the complete set together. Mixing new and worn belts can cause uneven load sharing and accelerated wear.

XPZ1950 - Metric Cogged V-Belt (10 X 1950)
SKU: XPZ1950
53 in stock
C120K - ARAMID BLACK V-BELT (7/8" X 124")
SKU: C120K
68 in stock

BX148 - Cogged Classical V-Belt (5/8" X 151")
SKU: BX148
35 in stock

B197 - Classical V-Belt 5/8" X 200")
SKU: B197
43 in stock
615L10 - L-POLY-V BELT
SKU: 615L10
24 in stock
3VX580 - Cogged Wedge V-Belt (3/8" X 58")
SKU: 3VX580
36 in stock
C125A - Classical V-Belt (7/8" X 129") C125
SKU: C125A
39 in stock
BX23 - Cogged Classical V-Belt (21/32" X 26")
SKU: BX23
19 in stock
B199 - Classical V-Belt (5/8" X 202")
SKU: B199
59 in stock

B184 - Classical V-Belt ( 5/8" X 187")
SKU: B184
10 in stock
B170K - Aramid Blue V-Belt (5/8" X 173" )
SKU: B170K
222 in stock
880L10 - L-POLY-V BELT
SKU: 880L10
17 in stock

810K8 - Micro-Rib V-Belt (81")
SKU: 810K8
2 in stock

726K8 - Micro-Rib V-Belt (72.6")
SKU: 726K8
34 in stock
3VX650 - Cogged Wedge V-Belt (3/8" X 65")
SKU: 3VX650
153 in stock

3L690 - Fractional V-Belt (3/8" X 69")
SKU: 3L690
87 in stock

3L330 - Fractional V-Belt (3/8" X 33")
SKU: 3L330
291 in stock

XPB1800 - B Section Metric Cogged (17 X 1800)
SKU: XPB1800
36 in stock

SPZ987 - Metric V-Belt (10 X 987)
SKU: SPZ987
70 in stock

SPZ670 - Metric V-Belt (10 X 670)
SKU: SPZ670
21 in stock

SPZ2240 - Metric V-Belt (10 X 2240)
SKU: SPZ2240
98 in stock
SPZ2180 - Metric V-Belt (10 X 2180)
SKU: SPZ2180
94 in stock

SPZ1412 - Metric V-Belt (10 X 1412)
SKU: SPZ1412
58 in stock

SPZ1012 - Metric V-Belt (10 X 1012)
SKU: SPZ1012
78 in stock








