Husqvarna ST926 Snow Blower Thrower Parts
The Husqvarna ST926 is a robust two-stage gas-powered snow blower, popular for its reliability in tackling moderate to heavy snowfall. Primarily manufactured in the early to mid-2000s, this model boasts a 26-inch clearing width and a powerful engine, making it a favorite among homeowners and light commercial users seeking efficient snow removal. Its durable construction ensures dependable performance season after season.
The Husqvarna ST926 snow blower was a staple in Husqvarna's lineup, produced primarily in the early to mid-2000s. This two-stage snow thrower is powered by a Tecumseh Snow King engine, typically ranging from 8 to 9 horsepower, depending on the specific sub-model. Many models featured an electric start option for easy starting in cold conditions. The two-stage design incorporates an auger that breaks up the snow and feeds it into a high-speed impeller, which then throws the snow away from the clearing path. The ST926 offers a 26-inch clearing width and an intake height of approximately 20-23 inches, allowing it to handle significant snow depths. Throwing distance can reach up to 30-40 feet, depending on snow conditions. The drive system utilizes wheels and offers multiple forward and reverse speeds, providing good maneuverability. Chute control is typically manual, allowing the operator to adjust the direction and angle of the snow discharge. A headlight provides enhanced visibility during early morning or evening snow removal. While not equipped with heated grips, the ST926 is well-suited for handling moderate to heavy snowfall in residential and light commercial settings, making it ideal for driveways, walkways, and parking areas.
Specifications
| Engine | Tecumseh Snow King 8-9 HP Electric Start (Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 26 inches |
| Intake Height | 20-23 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - 6 Forward/2 Reverse |
| Fuel Tank | 3 gallons |
| Weight | Approximately 200 lbs |
| Years Produced | Early to Mid 2000s |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for wear, damage, or bending. Replace worn or damaged components to maintain optimal snow-clearing performance.
- Check and Replace Shear Pins: The shear pins protect the auger and gearbox from damage. Inspect them frequently and replace any that are broken or sheared off. Use only the correct replacement shear pins specified for the ST926.
- Oil Change and Fuel Stabilizer: Change the engine oil annually to keep the engine running smoothly. Before storing the snow blower for the off-season, add fuel stabilizer to the gas tank to prevent fuel degradation and carburetor issues.
- Adjust Skid Shoes: Properly adjust the skid shoes to prevent the scraper bar from contacting the ground, especially on uneven surfaces. This protects the scraper bar and prevents damage to the clearing surface.
History & Background
The Husqvarna ST926 was introduced as a mid-range two-stage snow blower, designed to bridge the gap between smaller residential models and larger commercial units. It gained popularity for its balance of power, clearing capacity, and ease of use. While there weren't major redesigns during its production run, minor updates to the engine and components were implemented over the years to improve performance and reliability.
Frequently Asked Questions
What engine is in the Husqvarna ST926?
The Husqvarna ST926 is typically powered by a Tecumseh Snow King engine, ranging from 8 to 9 horsepower. An electric start option was available on some models for easier starting in cold weather.
What is the clearing width of the ST926?
The Husqvarna ST926 has a clearing width of 26 inches and an intake height of approximately 20-23 inches, allowing it to handle a good amount of snow depth.
Is the ST926 a single-stage or two-stage snow blower?
The Husqvarna ST926 is a two-stage snow blower. It uses an auger to gather snow and then an impeller to throw the snow out of the chute. This two-stage system is more effective for handling heavier snowfalls compared to single-stage models.
What are common parts needed for the ST926?
Common parts needed for the Husqvarna ST926 include shear pins, drive belts, auger belts, scraper bar, skid shoes, spark plugs, air filters, and fuel filters. Regular inspection and replacement of these parts will ensure optimal performance and longevity of your snow blower.
