Husqvarna 5524ST954223 Snow Blower Thrower Parts
The Husqvarna 5524ST954223 is a robust gas-powered, two-stage snow blower known for its reliability and efficient snow removal. Manufactured in the mid-2000s and potentially later, it features a 24-inch clearing width, making it a popular choice for homeowners and smaller commercial properties needing to tackle moderate to heavy snowfall. This model offered a balance of power and maneuverability, making it a sought-after machine.
The Husqvarna 5524ST954223 snow blower was a popular model designed for both residential and light commercial use. While specific production years can vary, it was likely manufactured throughout the mid to late 2000s and possibly into the early 2010s. It's powered by a Briggs & Stratton engine, providing approximately 5.5 horsepower (check engine model for exact specs) and displacing around 205cc. An electric start option may have been available on some models, adding to user convenience. As a two-stage snow blower, the 5524ST954223 utilizes an auger to break up the snow and then an impeller to throw it away from the clearing path. This model has a 24-inch clearing width and an intake height of approximately 20 inches, allowing it to handle moderate snow depths effectively. It can throw snow up to 30-35 feet. It uses a wheel drive system with multiple forward and reverse speeds (typically 5-6 forward and 1-2 reverse), providing good traction and control. The chute rotation is manual, allowing for directional snow throwing. While it may not have features like heated grips or a high-intensity headlight, its simple design and reliable engine make it a dependable choice for handling typical winter snowfalls. It's best suited for paved or gravel driveways and walkways where a powered snow thrower is required.
Specifications
| Engine | Briggs & Stratton 5.5 HP (Approx.) Electric Start (Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 24 inches |
| Intake Height | 20 inches (Approx.) |
| Throwing Distance | Up to 35 ft (Approx.) |
| Drive System | Wheel - 6 Forward / 2 Reverse (Typical) |
| Fuel Tank | 1.5 gallons (Approx.) |
| Weight | 170 lbs (Approx.) |
| Years Produced | Mid to Late 2000s - Early 2010s (Approx.) |
Maintenance Tips
- Auger and Impeller Inspection: Regularly check the auger blades and impeller for damage or wear. Replace worn parts to maintain optimal performance.
- Shear Pin Replacement: Always have spare shear pins on hand. Replace broken shear pins immediately to protect the auger gearbox from damage.
- Oil Change and Fuel Stabilizer: Change the engine oil annually and add fuel stabilizer to the gas tank before storing the snow blower for the off-season to prevent fuel degradation.
- Skid Shoe Adjustment: Adjust the skid shoes to ensure proper clearance and prevent damage to the scraper bar and driveway surface.
History & Background
The Husqvarna 5524ST954223 was introduced as a mid-range two-stage snow blower offering a balance of power and affordability. It was a popular choice for homeowners needing more power than a single-stage but without the high cost of larger commercial models. While there were no significant redesigns during its production run, minor component updates and improvements may have been implemented over time.
Frequently Asked Questions
What engine is in the Husqvarna 5524ST954223?
The Husqvarna 5524ST954223 typically uses a Briggs & Stratton engine, producing approximately 5.5 horsepower. Some models may have offered an electric start option for added convenience.
What is the clearing width of the 5524ST954223?
The Husqvarna 5524ST954223 has a clearing width of 24 inches and an approximate intake height of 20 inches.
Is the 5524ST954223 a single-stage or two-stage snow blower?
The Husqvarna 5524ST954223 is a two-stage snow blower. It utilizes an auger to collect and break up the snow, then an impeller to throw the snow away from the clearing path.
What are common parts needed for the 5524ST954223?
Common parts needed for the Husqvarna 5524ST954223 include shear pins, belts (auger belt, drive belt), scraper bar, skid shoes, spark plugs, fuel filters, and auger paddles.
