Husqvarna ST9027-954223074 Snow Blower Thrower Parts
The Husqvarna ST9027, manufactured around the late 1990s and early 2000s, is a gas-powered, two-stage snow thrower known for its robust performance. With a 27-inch clearing width, it was a popular choice for homeowners needing to tackle moderate to heavy snowfall. Its user-friendly design and reliable engine made it a dependable machine for residential snow removal.
The Husqvarna ST9027 (model number 954223074) was a workhorse in Husqvarna's snow blower lineup, primarily produced in the late 1990s and early 2000s. It's powered by a Tecumseh engine, generally around 9-10 HP, and most models featured an electric start for convenient starting in cold weather. As a two-stage snow blower, it utilizes an auger to break up the snow and then an impeller to throw it away from the clearing path. The ST9027 boasts a 27-inch clearing width and an intake height of approximately 20-21 inches, allowing it to handle significant snowfalls. Throwing distance is usually up to 30-40 feet. The drive system is wheel-driven, typically offering 6 forward speeds and 2 reverse speeds. Chute control is manual, allowing the operator to adjust the direction of the snow discharge. A headlight enhances visibility during early morning or late evening snow removal. This model is well-suited for homeowners and property managers dealing with moderate to heavy snow accumulations on driveways and walkways. It's capable of handling various snow conditions, from light, fluffy snow to heavier, wetter snow.
Specifications
| Engine | Tecumseh 9-10 HP Electric Start (Y/N Varies) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 27 inches |
| Intake Height | 21 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - 6 Forward/2 Reverse |
| Fuel Tank | Unknown gallons |
| Weight | Approx. 200 lbs |
| Years Produced | Late 1990s - Early 2000s |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for damage or wear. Replace worn or damaged parts to maintain optimal performance.
- Check and Replace Shear Pins: Shear pins are designed to break if the auger encounters a hard object. Always keep spare shear pins on hand and replace them immediately when broken to prevent damage to the snow blower.
- Fuel Stabilizer: Add fuel stabilizer to the gasoline before storing the snow blower for the off-season to prevent fuel degradation and carburetor issues.
- Adjust Skid Shoes: Adjust the skid shoes according to the surface being cleared. Raise them for gravel or uneven surfaces and lower them for paved surfaces to protect the scraper blade.
History & Background
The Husqvarna ST9027 was introduced as a mid-range snow blower designed for residential use. It was a popular model due to its balance of power, clearing width, and ease of use. While there weren't major redesigns during its production run, minor improvements may have been implemented over the years.
Frequently Asked Questions
What engine is in the Husqvarna ST9027 954223074?
The Husqvarna ST9027 typically uses a Tecumseh engine with horsepower ranging from 9 to 10 HP. Some models feature an electric start option for easier starting in cold weather.
What is the clearing width of the ST9027 954223074?
The Husqvarna ST9027 has a clearing width of 27 inches, allowing you to clear a significant path with each pass. Its intake height is approximately 21 inches.
Is the ST9027 954223074 a single-stage or two-stage snow blower?
The Husqvarna ST9027 is a two-stage snow blower. It uses an auger to break up and gather the snow, then an impeller to powerfully discharge the snow through the chute.
What are common parts needed for the ST9027 954223074?
Commonly needed parts for the ST9027 include shear pins (for the auger), drive belts, auger paddles, scraper bar, skid shoes, spark plugs, and fuel filters. Regular maintenance and replacement of these parts will keep your snow blower running smoothly.
