Husqvarna ST276EP-96191003200 Snow Blower Thrower Parts
The Husqvarna ST276EP (model 96191003200) is a robust two-stage gas-powered snow blower, typically manufactured in the late 2000s and early 2010s. Featuring a 27-inch clearing width, this model quickly became a favorite among homeowners and property managers looking for a dependable machine to tackle moderate to heavy snowfall on driveways and walkways. Its electric start and powerful engine made it exceptionally easy to use in cold weather conditions.
The Husqvarna ST276EP, model number 96191003200, was produced by Husqvarna to address the needs of users requiring a mid-sized, high-performance snow removal solution. While the exact years of production can vary, this model was most commonly seen during the late 2000s and early 2010s. The ST276EP is typically powered by a Briggs & Stratton or LCT engine, with horsepower ranging from 7 to 9 HP or approximately 250cc to 305cc. A key feature is the electric start, eliminating the need for pull-starting in freezing temperatures. This is a two-stage snow blower, utilizing an auger to break up snow and an impeller to powerfully discharge it. The clearing width is 27 inches, and the intake height is around 20-23 inches, allowing it to handle deeper snowdrifts. Throwing distances can reach up to 40 feet depending on snow conditions. The drive system is wheel-driven, offering multiple forward and reverse speeds for enhanced maneuverability. The chute rotation is typically controlled manually via a crank on the dashboard. It includes a headlight for improved visibility during early morning or late evening snow removal. While heated grips may not be a standard feature on all ST276EP models, its overall design and power make it ideally suited for homeowners and small businesses facing moderate to heavy snowfall on paved surfaces.
Specifications
| Engine | LCT 254cc Electric Start |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 27 inches |
| Intake Height | 23 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - 6 Forward/1 Reverse |
| Fuel Tank | 3.0 quarts |
| Weight | 225 lbs |
| Years Produced | late 2000s-early 2010s |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for wear or damage. Replace worn parts to maintain optimal snow throwing performance.
- Shear Pin Replacement: Keep spare shear pins on hand. If the auger suddenly stops while in use, it's likely a shear pin has broken. Replace it immediately after removing the obstruction.
- Fuel Stabilization: Add fuel stabilizer to the gas tank before storing the snow blower for the off-season. This prevents fuel degradation and ensures easy starting next winter.
- Skid Shoe Adjustment: Adjust the skid shoes to the correct height for your surface type. Lower settings for paved surfaces and higher settings for gravel or uneven terrain.
History & Background
The Husqvarna ST276EP was introduced as a mid-range option in Husqvarna's snow blower lineup, offering a balance of power and maneuverability. It gained popularity for its reliable engine and easy-to-use features like electric start. There weren't any major redesigns during its production run, making parts readily interchangeable across different production years.
Frequently Asked Questions
What engine is in the Husqvarna ST276EP 96191003200?
The Husqvarna ST276EP (96191003200) typically features an LCT (Liquid Combustion Technology) 254cc engine. Most models also feature a convenient electric start for easy starting in cold weather.
What is the clearing width of the ST276EP 96191003200?
The Husqvarna ST276EP (96191003200) has a clearing width of 27 inches and an intake height of 23 inches, allowing it to handle a significant amount of snow in each pass.
Is the ST276EP 96191003200 a single-stage or two-stage snow blower?
The Husqvarna ST276EP (96191003200) is a two-stage snow blower. It uses an auger to collect and break up the snow, and then an impeller to powerfully discharge it through the chute.
What are common parts needed for the ST276EP 96191003200?
Common replacement parts for the Husqvarna ST276EP include shear pins, drive belts, auger belts, scraper bar, skid shoes, spark plugs, fuel filters, and engine oil. Regular inspection and replacement of these parts will ensure optimal performance.
