Husqvarna ST268EP-96191003809 Snow Blower Thrower Parts
The Husqvarna ST268EP (96191003809) is a robust two-stage gas-powered snow blower, likely manufactured in the late 2000s and early 2010s. Featuring a 26-inch clearing width, this model became popular due to its powerful engine and ability to handle substantial snowfall on mid-sized to large driveways and properties. Its electric start and robust construction made it a favorite for homeowners and light commercial users.
The Husqvarna ST268EP, model number 96191003809, was a popular two-stage snow blower designed for handling moderate to heavy snowfalls. While the exact years of production may vary, it was likely available during the late 2000s and early 2010s. This model is powered by a Briggs & Stratton engine, typically around 10.5 HP or 305cc, and features an electric start for easy starting in cold conditions. The two-stage design utilizes a robust auger system to break up snow and an impeller to throw it a considerable distance. It offers a 26-inch clearing width and an intake height of approximately 23 inches, allowing it to handle deeper snowdrifts. The throwing distance can reach up to 40 feet depending on snow conditions. The ST268EP features a wheel drive system with multiple forward and reverse speeds, providing good traction and maneuverability. The chute rotation is typically controlled manually, allowing the operator to direct the snow discharge. A headlight enhances visibility during early morning or evening snow removal. While heated grips were not a standard feature, some users may have added aftermarket accessories. This snow blower is ideally suited for clearing driveways, sidewalks, and patios in areas with moderate to heavy snowfall.
Specifications
| Engine | Briggs & Stratton 10.5 HP, 305cc Electric Start |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 26 inches |
| Intake Height | 23 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - 6 Forward/1 Reverse |
| Fuel Tank | 3 gallons |
| Weight | 230 lbs |
| Years Produced | Late 2000s - Early 2010s (approx.) |
Maintenance Tips
- Regularly inspect the auger and impeller for damage. Look for bends, cracks, or excessive wear. Replace damaged parts promptly to maintain optimal performance.
- Always use the correct shear pins. Using the wrong size or grade of shear pin can damage the auger gearbox. Keep spare shear pins on hand.
- Change the engine oil annually. Use the oil type recommended by Briggs & Stratton. Check the oil level before each use. Consider adding fuel stabilizer to your gasoline for off-season storage to prevent fuel breakdown.
- Adjust the skid shoes as needed. Adjust the skid shoes based on the surface you're clearing (pavement vs. gravel) to prevent damage to the snow blower and the surface.
History & Background
The Husqvarna ST268EP (96191003809) was introduced as a mid-range two-stage snow blower designed to provide reliable performance for homeowners. It built on Husqvarna's reputation for durable outdoor power equipment. Its combination of power, clearing width, and electric start made it a popular choice in regions with significant snowfall.
Frequently Asked Questions
What engine is in the Husqvarna ST268EP 96191003809?
The Husqvarna ST268EP (96191003809) is equipped with a Briggs & Stratton engine, typically around 10.5 horsepower (HP) or 305cc. It also features an electric start for easier starting in cold conditions.
What is the clearing width of the ST268EP 96191003809?
The Husqvarna ST268EP (96191003809) has a clearing width of 26 inches and an intake height of approximately 23 inches.
Is the ST268EP 96191003809 a single-stage or two-stage snow blower?
The Husqvarna ST268EP (96191003809) is a two-stage snow blower. This means it uses an auger to gather the snow and then an impeller to throw the snow out of the discharge chute, making it more efficient for handling larger volumes of snow.
What are common parts needed for the ST268EP 96191003809?
Common replacement parts for the Husqvarna ST268EP (96191003809) include shear pins, drive belts, auger belts, auger paddles (if applicable to the design), scraper bar, skid shoes, spark plugs, and fuel filters. Regularly checking and replacing these parts can keep your snow blower running smoothly.
