Husqvarna 8527STE9542 Snow Blower Thrower Parts
The Husqvarna 8527STE9542 is a robust two-stage gas-powered snow blower known for its reliability and power, likely manufactured in the mid-2000s to early 2010s. Featuring a 27-inch clearing width, this model gained popularity among homeowners and snow removal professionals for its ability to handle moderate to heavy snowfall with ease. Its combination of strong performance and user-friendly features made it a sought-after choice for tackling winter's challenges.
The Husqvarna 8527STE9542 is a two-stage snow blower designed for efficient snow removal. While the exact production years are difficult to pinpoint without specific documentation, evidence suggests the model was available from the mid-2000s into the early 2010s. It's powered by a robust gasoline engine, likely a Briggs & Stratton or LCT engine in the 8-10 HP range (approximately 250-300cc), with an electric start option for easy starting in cold weather. The two-stage system uses an auger to break up the snow and then an impeller to throw it away from the clearing path. The 27-inch clearing width and an intake height around 20-23 inches allow it to handle substantial snow depths. Throwing distance can reach up to 40 feet, depending on snow conditions. The drive system is typically wheel-driven with multiple forward and reverse speeds, providing good traction and maneuverability. Chute controls are usually manual, allowing the operator to adjust the direction of the snow stream. The unit also includes a headlight for improved visibility in low-light conditions. While not always standard, heated grips are available on some models. Ideal for handling moderate to heavy snowfall on driveways, sidewalks, and larger properties, this machine is built to withstand demanding winter conditions.
Specifications
| Engine | LCT 291cc Electric Start |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 27 inches |
| Intake Height | 23 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - 6 Forward/2 Reverse |
| Fuel Tank | 3 gallons |
| Weight | 220 lbs |
| Years Produced | Mid 2000s - Early 2010s |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for damage or wear. Replace worn or damaged parts to maintain optimal snow throwing performance.
- Replace Shear Pins: Always keep extra shear pins on hand. If the auger hits a hard object, the shear pins are designed to break, preventing damage to the engine and transmission. Replace broken shear pins immediately.
- Fuel Stabilizer: Add fuel stabilizer to the gasoline before storing the snow blower for the off-season. This prevents fuel degradation and ensures easier starting next winter.
- Adjust Skid Shoes: Adjust the skid shoes to the appropriate height for your surface. Raising the skid shoes is recommended for gravel or uneven surfaces to prevent damage to the machine and the surface.
History & Background
The Husqvarna 8527STE9542 was introduced as a mid-range snow blower offering a balance of power and maneuverability. While specific details on redesigns are limited, Husqvarna continually updates their snow blower models based on user feedback and technological advancements. This particular model contributed to Husqvarna's reputation for producing reliable and effective snow removal equipment for residential and light commercial use.
Frequently Asked Questions
What engine is in the Husqvarna 8527STE9542?
The Husqvarna 8527STE9542 is typically equipped with an LCT (Liquid Combustion Technology) 291cc engine that delivers ample power for two-stage snow removal. Most models include an electric start for convenient starting in cold conditions.
What is the clearing width of the 8527STE9542?
The Husqvarna 8527STE9542 boasts a 27-inch clearing width, allowing you to clear a substantial path with each pass. It also has an intake height of 23 inches, enabling it to handle deeper snow drifts effectively.
Is the 8527STE9542 a single-stage or two-stage snow blower?
The 8527STE9542 is a two-stage snow blower. This means it uses an auger to break up and gather the snow, and then a separate impeller to throw the snow out of the discharge chute. This system is more powerful and efficient than a single-stage snow blower, making it suitable for heavier snowfalls.
What are common parts needed for the 8527STE9542?
Common parts needed for the Husqvarna 8527STE9542 include shear pins (for auger protection), drive belts (auger and impeller), scraper bar (for clearing snow down to the surface), skid shoes (for adjusting the height of the scraper bar), spark plugs (for reliable ignition), and fuel filters (for clean fuel delivery). Also, auger paddles may need replacement over time depending on usage.
