Husqvarna 8024ST954223 Snow Blower Thrower Parts
The Husqvarna 8024ST954223 is a robust gas-powered two-stage snow blower, likely manufactured in the late 2000s/early 2010s. Featuring a 24-inch clearing width, it was a popular choice for homeowners needing to clear moderate to heavy snowfall from driveways and walkways. Its two-stage design allowed it to handle deeper snow than single-stage models, making it a reliable option for residential snow removal.
The Husqvarna 8024ST954223, though specific production dates require further verification, was likely manufactured from the late 2000s into the early 2010s. It's a two-stage snow blower designed for residential use. It is powered by a gas engine, likely a Briggs & Stratton or similar brand, producing around 8-10 HP (approximately 205-250cc). An electric start option was a common feature on models of this type, providing easier starting in cold weather. The two-stage design utilizes an auger to break up and gather the snow, and then an impeller to throw the snow away from the cleared area. The 8024ST954223 boasts a 24-inch clearing width and an intake height of around 20-23 inches, allowing it to tackle significant snow depths. Throwing distance is typically up to 30-40 feet, depending on snow conditions. This model likely had a wheel-drive system with multiple forward and reverse speeds. Chute control was most likely manual, offering directional control over the snow stream. A headlight would have been standard for improved visibility during early morning or evening snow removal. While heated grips are not certain, they would be a premium feature. The 8024ST954223 is well-suited for handling moderate to heavy snowfalls on driveways, sidewalks, and other residential areas.
Specifications
| Engine | Likely Briggs & Stratton 8-10 HP, 205-250cc, Electric Start (most likely) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 24 inches |
| Intake Height | 20-23 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - Multiple Forward/Reverse |
| Fuel Tank | ~1.5 gallons |
| Weight | ~180 lbs |
| Years Produced | Late 2000s - Early 2010s (estimated) |
Maintenance Tips
- Regularly inspect the auger and impeller for damage or wear. Replace worn or damaged parts promptly to maintain optimal snow throwing performance.
- Check and replace shear pins as needed. These protect the auger gearbox from damage if a hard object is struck. Always use the correct shear pins specified for your model.
- Change the engine oil at the recommended intervals. Consult your engine's owner's manual for the correct oil type and change frequency.
- Use fuel stabilizer during off-season storage. This prevents fuel degradation and keeps the engine running smoothly next season.
History & Background
The Husqvarna 8024ST954223 was a popular model representing Husqvarna's line of two-stage snow blowers designed for residential snow removal. While specific details on design changes are difficult to ascertain without access to archived product information, it likely incorporated standard features for its time, such as electric start and multi-speed drive. It was a well-regarded model that provided a good balance of power, clearing width, and features for homeowners.
Frequently Asked Questions
What engine is in the Husqvarna 8024ST954223?
The Husqvarna 8024ST954223 likely uses a Briggs & Stratton gas engine in the 8-10 HP range, which is approximately 205-250cc. It most likely has an electric start option for easier starting in cold weather.
What is the clearing width of the 8024ST954223?
The 8024ST954223 has a clearing width of 24 inches. The intake height is approximately 20-23 inches.
Is the 8024ST954223 a single-stage or two-stage snow blower?
The Husqvarna 8024ST954223 is a two-stage snow blower. This means it uses an auger to collect and break up the snow, and then an impeller to throw the snow out of the discharge chute.
What are common parts needed for the 8024ST954223?
Common parts needed for the Husqvarna 8024ST954223 include shear pins, drive belts, auger paddles, scraper bar, skid shoes, spark plugs, and fuel filters. Regular inspection and replacement of these parts will help keep your snow blower running smoothly.
