Case IH SUPER-H Tractor Parts
SUPER H parts and accessories
The Case IH Super H, produced from 1953 to 1954, was a popular row-crop tractor known for its reliability and versatility. Powered by a 31 horsepower gasoline engine, its drawbar HP rating was 28.5 HP, and PTO HP came in at 30.5 HP. Its straightforward design and efficient performance made it a favorite among farmers for various agricultural tasks.
The Case IH Super H emerged as an evolution of the Farmall H, inheriting its robust design and agricultural prowess. Production spanned from 1953 to 1954, marking a brief but impactful presence in the tractor market. The tractor was powered by an IHC C-169 4-cylinder gasoline engine, delivering approximately 31 horsepower. With a displacement of 169 cubic inches, this engine provided ample power for a variety of farm tasks. The Super H employed a standard gear transmission, typically offering 5 forward speeds and 1 reverse speed, allowing operators to select the optimal speed for different applications. Its PTO horsepower was rated at 30.5 HP, typically operating at 540 RPM. The hydraulic system offered a capacity suitable for basic implement control. The Super H featured a Category I 3-point hitch, enabling the use of a wide range of implements for row-crop farming, haymaking, and general farm work. Distinguishing itself from earlier H models, the Super H incorporated updates to improve performance and operator comfort, making it a desirable choice for farmers seeking a reliable and capable tractor.
Specifications
| Engine | IHC C-169 31 HP Gasoline |
|---|---|
| PTO HP | 30.5 HP @ 540 RPM |
| Transmission | Gear 5F/1R |
| Hydraulics | 8 GPM, 0 remotes |
| 3-Point Hitch | Category I, 1350 lbs |
| Fuel Capacity | 17 gallons |
| Weight | 4460 lbs |
| Years Produced | 1953-1954 |
Maintenance Tips
- Change the engine oil and filter every 125 hours of operation using a quality oil that meets the manufacturer's specifications.
- Regularly inspect and maintain the hydraulic system, checking for leaks, and ensuring proper fluid levels to prevent damage to hydraulic components.
- Keep the fuel system clean by using fresh fuel, adding fuel stabilizer during seasonal storage, and replacing the fuel filter according to the manufacturer's recommendations.
- Before storing the tractor for an extended period, drain the fuel tank, lubricate all grease fittings, and store it in a dry, sheltered location to prevent rust and corrosion.
History & Background
The Case IH Super H represented an upgraded iteration of the original Farmall H, building on its predecessor's success with enhanced features. Introduced in 1953, it quickly became a recognized model in the agricultural landscape. Its short production run and improvements over the H contributed to its standing as a sought-after classic tractor.
Frequently Asked Questions
What engine is in the Case Ih SUPER H?
The Case IH Super H is equipped with an IHC C-169 4-cylinder gasoline engine producing 31 horsepower.
What is the PTO horsepower on a SUPER H?
The PTO horsepower rating on a Super H is 30.5 HP, operating at 540 RPM.
What oil filter fits the SUPER H?
Common oil filter cross-references for the Super H include Fram C-4, Wix 51010, and NAPA 1010. Always verify compatibility with your specific tractor before purchasing.
What are common parts needed for the SUPER H?
Common wear parts for the Super H include engine oil filters, fuel filters, spark plugs, ignition components, belts, hydraulic seals, steering components (tie rod ends, drag links), clutch discs, pressure plates, and throwout bearings.

107304C91-12V - 12 Volt Negative Ground Electronic Ignition New Distributor
SKU: 107304C91-12V
10 in stock

107304C91 - 6 Volt Positive Ground Electronic Ignition New Distributor
SKU: 107304C91
2 in stock

57654D - Front Drawbar Pin
SKU: 57654D
111 in stock

357530R1 - Drawbar
SKU: 357530R1
8 in stock

LF618 - Cartridge (QTY 6) Lube Filter
SKU: LF618
Out of stock

WBKIH4 - Wheel Bearing Kit
SKU: WBKIH4
22 in stock
ST202 - BALL BEARING
SKU: ST202
43 in stock

87538419 - Tie Rod Dust Seal
SKU: 87538419
545 in stock

6660DA - Steering Worm Bearing Retainer
SKU: 6660DA
18 in stock

60351 - Thrust Spindle Bearing
SKU: 60351
116 in stock

60070D - Steering Wheel
SKU: 60070D
65 in stock

55412D - Felt Washer
SKU: 55412D
1 in stock

48548D - Hub Wear Sleeve
SKU: 48548D
6 in stock

48539DA - Seal
SKU: 48539DA
645 in stock

360420R91 - Spindle (RH)
SKU: 360420R91
8 in stock

360419R91 - Spindle (LH)
SKU: 360419R91
8 in stock

358958R2 - Upright Spindle Bushing
SKU: 358958R2
79 in stock

350557R1 - Front Axle Clamp Pin
SKU: 350557R1
187 in stock

185106C1 - Thrust Bearing
SKU: 185106C1
1052 in stock

1779-I - Tapered Roller Bearing Cone
SKU: 1779-I
86 in stock

1729-I - Tapered Bearing Cup
SKU: 1729-I
112 in stock

HS15003 - 1 1/2" I.D. Bulk Hose
SKU: HS15003
99 in stock

HS13753 - 1 3/8" ID Bulk Hose
SKU: HS13753
26 in stock

A184904 - 6 Blade Fan
SKU: A184904
7 in stock
