Case IH 8910 Tractor Parts

8910 parts and accessories

The Case IH 8910 tractor, manufactured from 1994 to 1997, was a popular choice among farmers for its robust performance and reliability. Powered by a Cummins 5.9L diesel engine, this tractor delivered approximately 130 engine horsepower and boasted a PTO horsepower around 110, making it well-suited for a variety of agricultural tasks. Its ease of use and dependable powertrain made it a workhorse on farms across the country.

The Case IH 8910 was part of the 8900 series tractors introduced in 1994. Production continued until 1997, establishing it as a well-regarded model in the Case IH lineup. Under the hood lies a Cummins 5.9L inline 6-cylinder diesel engine, producing approximately 130 horsepower. This engine, with a displacement of 359 cubic inches (5.9 liters), was known for its durability and fuel efficiency. The transmission options included a partial powershift transmission with 16 forward and 16 reverse gears or a full powershift option. The PTO delivers around 110 horsepower, offering both 540 and 1000 RPM options for versatile implement compatibility. The hydraulic system provides a flow rate of approximately 26 gallons per minute, with typically two or three remote valves available. It features a Category II 3-point hitch, capable of lifting around 7,500 lbs. The Case IH 8910 found common applications in row crop farming, hay production, livestock operations, and general tillage. Distinguishing it from other models in the series, the 8910 offered a good balance of power and features without being the largest or most expensive tractor in the lineup, making it a practical choice for many farmers.

Specifications

Engine	Cummins 5.9L 130 HP Diesel
PTO HP	110 HP @ 540/1000 RPM
Transmission	Partial Powershift, 16F/16R
Hydraulics	26 GPM, 2-3 remotes
3-Point Hitch	Category II, 7500 lbs
Fuel Capacity	55 gallons
Weight	12,500 lbs
Years Produced	1994-1997

Maintenance Tips

Engine Oil & Filter: Change the engine oil and filter every 250-300 hours using a high-quality diesel engine oil that meets Case IH specifications. Regularly inspect the oil level.
Hydraulic System: Check the hydraulic fluid level and condition regularly. Replace the hydraulic filters every 500 hours or as recommended by the manufacturer to prevent contamination and maintain optimal hydraulic performance.
Fuel System: Use clean, high-quality diesel fuel and replace the fuel filters at the recommended intervals (typically every 250-500 hours) to prevent fuel system issues. Drain the water separator frequently.
Seasonal Storage: Before storing the tractor for the off-season, fill the fuel tank to prevent condensation, change the engine oil and filter, grease all fittings, and disconnect the battery. Store it in a dry, sheltered location.

History & Background

The Case IH 8910 was introduced in 1994 as part of the 8900 series, replacing earlier models in the Case IH lineup. There were no major redesigns during its production run from 1994 to 1997. The 8910 contributed to Case IH's reputation for producing reliable and versatile tractors for a broad range of agricultural applications.

Frequently Asked Questions

What engine is in the Case Ih 8910?

The Case IH 8910 is equipped with a Cummins 5.9L inline 6-cylinder diesel engine producing approximately 130 horsepower.

What is the PTO horsepower on a 8910?

The PTO horsepower on the Case IH 8910 is approximately 110 HP, and it offers both 540 and 1000 RPM PTO options.

What oil filter fits the 8910?

Common oil filter cross-references for the Case IH 8910 include Fleetguard LF3349, Wix 51794, and Baldwin B1421. Always verify compatibility with your specific tractor's manual or parts catalog.

What are common parts needed for the 8910?

Common wear parts for the Case IH 8910 include engine oil filters, fuel filters, hydraulic filters, fan belts, hydraulic cylinder seal kits, steering components (tie rod ends), and clutch components (depending on transmission type).

Showing 49-72 of 321 products

Sort by: