Case IH 1466 Tractor Parts
1466 parts and accessories
The Case IH 1466 tractor, manufactured from 1971 to 1976, was a powerhouse on the farm. Equipped with an International Harvester DT-414 diesel engine producing approximately 145 horsepower, and boasting a PTO horsepower around 122, the 1466 became a favorite for its reliability and ability to handle demanding tasks. Its robust design and powerful engine made it a workhorse for row crop farming and tillage operations.
The Case IH 1466 tractor was part of the International Harvester's '66 series, introduced in 1971, and continued production until 1976. These tractors were designed to provide farmers with more power and improved features compared to previous models. The 1466 is powered by an International Harvester DT-414 cubic inch, 6-cylinder diesel engine, delivering approximately 145 engine horsepower. Its PTO horsepower is rated around 122. This model typically features a gear-drive transmission offering 8 forward and 4 reverse speeds, providing a suitable range for various field operations. The 1466's PTO is available in both 540 and 1000 RPM configurations. The hydraulic system has a capacity of approximately 15 GPM, powering two or three remote hydraulic valves for implements. It is equipped with a Category II 3-point hitch system. The 1466 excels in row crop operations, hay baling, livestock feeding, and various tillage applications like plowing and discing. Compared to the smaller 1066 or larger 1566, the 1466 struck a balance between power and maneuverability, making it a versatile choice for many farms.
Specifications
| Engine | International Harvester DT-414 145 HP Diesel |
|---|---|
| PTO HP | 122 HP @ 1000 RPM |
| Transmission | Gear Drive 8F/4R |
| Hydraulics | 15 GPM, 2-3 remotes |
| 3-Point Hitch | Category II, 5700 lbs lift capacity |
| Fuel Capacity | 45 gallons |
| Weight | 13,605 lbs |
| Years Produced | 1971-1976 |
Maintenance Tips
- Engine Oil & Filter: Change engine oil and filter every 100-125 hours of operation using high-quality diesel engine oil that meets the specifications outlined in your operator's manual. Regularly inspect the oil level and condition.
- Hydraulic System Maintenance: Check hydraulic fluid levels regularly and change the hydraulic filter according to the manufacturer's recommendations (typically every 500 hours). Use the correct type of hydraulic fluid to prevent damage to seals and components.
- Fuel System Care: Use clean, high-quality diesel fuel and replace fuel filters as recommended to prevent fuel system clogging. Drain any water that accumulates in the fuel/water separator regularly.
- Seasonal Storage: Before storing the tractor for an extended period, stabilize the fuel with a fuel stabilizer to prevent fuel degradation. Disconnect the battery and store it in a cool, dry place. Lubricate all grease fittings and cover the tractor to protect it from the elements.
History & Background
Introduced in 1971, the Case IH (International Harvester at the time) 1466 represented a significant advancement in tractor technology for its era. While there were no major redesigns during its production run, the 1466 remains a significant model in agricultural history, remembered for its power and reliability in the field, contributing greatly to increased farming efficiency.
Frequently Asked Questions
What engine is in the Case Ih 1466?
The Case IH 1466 is equipped with an International Harvester DT-414, a 414 cubic inch, 6-cylinder diesel engine producing approximately 145 horsepower.
What is the PTO horsepower on a 1466?
The PTO horsepower on a Case IH 1466 is rated at approximately 122 horsepower, with both 540 and 1000 RPM options available.
What oil filter fits the 1466?
The Case IH 1466 typically uses a Fram PH5 or equivalent oil filter. Common cross-references include Wix 51794 and NAPA 1794. Always verify fitment with your parts supplier.
What are common parts needed for the 1466?
Common wear parts for the Case IH 1466 include engine oil filters, fuel filters, hydraulic filters, fan belts, radiator hoses, hydraulic seals, tie rod ends, steering components, and clutch disc/pressure plate components.

389164R12 - Inner Handle Auxillary Valve Base
SKU: 389164R12
73 in stock

384112R11 - Valve Spool Actuator
SKU: 384112R11
56 in stock

384111R91 - Control Tube Support Assembly Lever
SKU: 384111R91
43 in stock

383243R92 - Valve Operating Arm
SKU: 383243R92
128 in stock

382319R1 - Drive Selector Valve Stem
SKU: 382319R1
16 in stock

371524R1 - Back Plate
SKU: 371524R1
106 in stock

1272964C94 - IH Remote Couplers To ISO Remote Couplers Conversion Kit
SKU: 1272964C94
321 in stock

1272196C1 - Coupler Dust Cap
SKU: 1272196C1
135 in stock

120114C91 - Hydraulic (12 GPM MCV) Pump
SKU: 120114C91
47 in stock

HD34NFNUT - Nut 3/4-16 Hex
SKU: HD34NFNUT
1298 in stock

539827R2 - Wheel Stud w/ Nut
SKU: 539827R2
612 in stock

393772R1 - Rear Rim Wheel Clamp Bolt
SKU: 393772R1
1116 in stock

380870R1 - Rear Rim Wheel Clamp
SKU: 380870R1
286 in stock

FK8788 - (1) LH (1) RH Fender Kit
SKU: FK8788
73 in stock

64517C1 - Window Seal
SKU: 64517C1
Out of stock

536653R1 - Hood Rubber Washer
SKU: 536653R1
1860 in stock

533188R1 - 1 Light (RH) Fender
SKU: 533188R1
83 in stock

533187R1 - 1 Light (LH) Fender
SKU: 533187R1
68 in stock

531233R2 - Grille Screen
SKU: 531233R2
39 in stock

399336R1 - Fender Mounting (RH) Bracket
SKU: 399336R1
71 in stock

399335R1 - Fender Mounting (LH) Bracket
SKU: 399335R1
48 in stock

388944R2 - Fender Mounting U-Bolt
SKU: 388944R2
198 in stock

380415R11 - Battery Cover
SKU: 380415R11
143 in stock

373483R2 - Hood Shoulder Bolt
SKU: 373483R2
950 in stock
