(828) 649-7190
Same Day Shipping Before 2pm EST

Case IH 1466 Tractor Parts

1466 parts and accessories

The Case IH 1466 tractor, manufactured from 1971 to 1976, was a powerhouse on the farm. Equipped with an International Harvester DT-414 diesel engine producing approximately 145 horsepower, and boasting a PTO horsepower around 122, the 1466 became a favorite for its reliability and ability to handle demanding tasks. Its robust design and powerful engine made it a workhorse for row crop farming and tillage operations.

The Case IH 1466 tractor was part of the International Harvester's '66 series, introduced in 1971, and continued production until 1976. These tractors were designed to provide farmers with more power and improved features compared to previous models. The 1466 is powered by an International Harvester DT-414 cubic inch, 6-cylinder diesel engine, delivering approximately 145 engine horsepower. Its PTO horsepower is rated around 122. This model typically features a gear-drive transmission offering 8 forward and 4 reverse speeds, providing a suitable range for various field operations. The 1466's PTO is available in both 540 and 1000 RPM configurations. The hydraulic system has a capacity of approximately 15 GPM, powering two or three remote hydraulic valves for implements. It is equipped with a Category II 3-point hitch system. The 1466 excels in row crop operations, hay baling, livestock feeding, and various tillage applications like plowing and discing. Compared to the smaller 1066 or larger 1566, the 1466 struck a balance between power and maneuverability, making it a versatile choice for many farms.

Specifications

EngineInternational Harvester DT-414 145 HP Diesel
PTO HP122 HP @ 1000 RPM
TransmissionGear Drive 8F/4R
Hydraulics15 GPM, 2-3 remotes
3-Point HitchCategory II, 5700 lbs lift capacity
Fuel Capacity45 gallons
Weight13,605 lbs
Years Produced1971-1976

Maintenance Tips

  • Engine Oil & Filter: Change engine oil and filter every 100-125 hours of operation using high-quality diesel engine oil that meets the specifications outlined in your operator's manual. Regularly inspect the oil level and condition.
  • Hydraulic System Maintenance: Check hydraulic fluid levels regularly and change the hydraulic filter according to the manufacturer's recommendations (typically every 500 hours). Use the correct type of hydraulic fluid to prevent damage to seals and components.
  • Fuel System Care: Use clean, high-quality diesel fuel and replace fuel filters as recommended to prevent fuel system clogging. Drain any water that accumulates in the fuel/water separator regularly.
  • Seasonal Storage: Before storing the tractor for an extended period, stabilize the fuel with a fuel stabilizer to prevent fuel degradation. Disconnect the battery and store it in a cool, dry place. Lubricate all grease fittings and cover the tractor to protect it from the elements.

History & Background

Introduced in 1971, the Case IH (International Harvester at the time) 1466 represented a significant advancement in tractor technology for its era. While there were no major redesigns during its production run, the 1466 remains a significant model in agricultural history, remembered for its power and reliability in the field, contributing greatly to increased farming efficiency.

Frequently Asked Questions

What engine is in the Case Ih 1466?

The Case IH 1466 is equipped with an International Harvester DT-414, a 414 cubic inch, 6-cylinder diesel engine producing approximately 145 horsepower.

What is the PTO horsepower on a 1466?

The PTO horsepower on a Case IH 1466 is rated at approximately 122 horsepower, with both 540 and 1000 RPM options available.

What oil filter fits the 1466?

The Case IH 1466 typically uses a Fram PH5 or equivalent oil filter. Common cross-references include Wix 51794 and NAPA 1794. Always verify fitment with your parts supplier.

What are common parts needed for the 1466?

Common wear parts for the Case IH 1466 include engine oil filters, fuel filters, hydraulic filters, fan belts, radiator hoses, hydraulic seals, tie rod ends, steering components, and clutch disc/pressure plate components.

Showing 385-408 of 497 products
JLM104948-I - Tapered Roller Bearing Cone

JLM104948-I - Tapered Roller Bearing Cone

SKU: JLM104948-I

$19.03

371 in stock

HD78NFSLNUT - Spindle Nut

HD78NFSLNUT - Spindle Nut

SKU: HD78NFSLNUT

$4.26

397 in stock

G15215 - BEARING

SKU: G15215

$10.93

205 in stock

87538419 - Tie Rod Dust Seal

87538419 - Tie Rod Dust Seal

SKU: 87538419

$5.25

545 in stock

87016563 - Slotted; 7/8"-14 Nut

87016563 - Slotted; 7/8"-14 Nut

SKU: 87016563

$4.26

397 in stock

80446C91 - Steering Cylinder Repair Kit

80446C91 - Steering Cylinder Repair Kit

SKU: 80446C91

$72.15

201 in stock

71820C91 - Cylinder End

71820C91 - Cylinder End

SKU: 71820C91

$63.78

68 in stock

71788C1 - Center Steering Arm Bushing

71788C1 - Center Steering Arm Bushing

SKU: 71788C1

$13.54

179 in stock

71787C91 - Center Steering Arm

71787C91 - Center Steering Arm

SKU: 71787C91

$387.67

46 in stock

71785VSR - RH Steering Arm TAPER-LOK Upright Shaft

71785VSR - RH Steering Arm TAPER-LOK Upright Shaft

SKU: 71785VSR

$144.90

3 in stock

71785VSL - LH Steering Arm TAPER-LOK Upright Shaft

71785VSL - LH Steering Arm TAPER-LOK Upright Shaft

SKU: 71785VSL

$160.24

1 in stock

71785TLS - Taper-Lok Assembly (Set/2)

71785TLS - Taper-Lok Assembly (Set/2)

SKU: 71785TLS

$573.47

105 in stock

71785TLR - TAPER-LOK Spindle w/ RH Steering Arm

71785TLR - TAPER-LOK Spindle w/ RH Steering Arm

SKU: 71785TLR

$354.86

11 in stock

71785TLL - TAPER-LOK Spindle w/ LH Steering Arm

71785TLL - TAPER-LOK Spindle w/ LH Steering Arm

SKU: 71785TLL

$333.94

11 in stock

71785SPO - (1) TAPER-LOK Complete Spindle only
Out of Stock

71785SPO - (1) TAPER-LOK Complete Spindle only

SKU: 71785SPO

$272.24

Out of stock

71785SAR - (1) RH Steering Arm for TAPER-LOK Spindle

71785SAR - (1) RH Steering Arm for TAPER-LOK Spindle

SKU: 71785SAR

$108.15

39 in stock

71785SAL - (1) LH Steering Arm for TAPER-LOK Spindle

71785SAL - (1) LH Steering Arm for TAPER-LOK Spindle

SKU: 71785SAL

$113.90

161 in stock

71785HD - Steering (RH/LH) Spindle

71785HD - Steering (RH/LH) Spindle

SKU: 71785HD

$231.22

61 in stock

71785C92 - Spindle (RH/LH)

71785C92 - Spindle (RH/LH)

SKU: 71785C92

$232.11

101 in stock

65320C1 - axle pivot Ref 16 - Ball

65320C1 - axle pivot Ref 16 - Ball

SKU: 65320C1

$30.25

487 in stock

650247R1 - Standard Adjustable Wide Tread Front Axle Pin

SKU: 650247R1

$10.47

76 in stock

63864C93 - Power Steering Cylinder

63864C93 - Power Steering Cylinder

SKU: 63864C93

$491.60

58 in stock

533808R1 - Stay Rod Socket

533808R1 - Stay Rod Socket

SKU: 533808R1

$33.83

46 in stock

533580R2 - Power Steering Cylinder Mounting Pin

533580R2 - Power Steering Cylinder Mounting Pin

SKU: 533580R2

$32.56

17 in stock