Case IH 6130 Combine Parts

6130 parts and accessories

The Case IH 6130 combine, produced from 2011 to 2015, delivered a potent combination of power and efficiency for grain harvesting. With a robust 320 HP engine and header widths ranging from 20 to 30 feet, the 6130's single rotor design offered excellent threshing and separation. This model became a favorite among farmers for its reliable performance and adaptability to various crops.

The Case IH 6130 combine harvester was introduced as part of the Axial-Flow series, manufactured from 2011 to 2015. Powering the 6130 is an 8.7L Case IH FPT engine, delivering a peak power of 320 horsepower. This engine provides ample power for handling demanding harvesting conditions. The 6130 utilizes a single axial-flow rotor threshing and separating system, known for its gentle grain handling and high capacity. The grain tank boasts a capacity of approximately 300 bushels, allowing for extended harvesting runs. The unloading auger provides a discharge rate of 3.2 bushels per second (approximately 192 bu/min), enabling quick unloading. Available header widths ranged from 20 to 30 feet, accommodating varying field sizes and crop conditions. The 6130 offered optional chopper and spreader configurations for residue management. The cab is designed for operator comfort and efficiency, featuring intuitive controls and good visibility. The Case IH 6130 excels in harvesting a variety of crops, including wheat, corn, soybeans, and other small grains, providing versatility for diverse farming operations.

Specifications

Engine	Case IH FPT 320 HP 8.7L Diesel
Separator Type	Single Axial-Flow Rotor - 30 inch Rotor
Grain Tank	300 bushels
Unloading Rate	192 bu/min
Header Widths	20-30 ft
Fuel Capacity	200 gallons
Weight	28,500 lbs
Years Produced	2011-2015

Maintenance Tips

Concave Adjustment: Regularly inspect and adjust concaves according to the crop being harvested to optimize threshing and minimize grain loss.
Belt and Chain Tension: Check and maintain proper tension on all belts and chains, as loose or overtightened components can lead to premature wear and failure.
Sieve and Chaffer Cleaning: Regularly clean the sieves and chaffer to remove debris and ensure proper air flow, maximizing grain cleaning efficiency and preventing plugging.
Bearing Greasing: Grease all bearings according to the manufacturer's recommendations to ensure smooth operation and prevent premature bearing failure. Pay close attention to the rotor and header bearings.

History & Background

The Case IH 6130 was introduced as part of the Axial-Flow series combine harvesters, known for their efficient single rotor design. It offered a balance of power and capacity suitable for mid-sized farms and contributed to the evolution of harvesting technology. Its popularity helped solidify Case IH's position in the combine market.

Frequently Asked Questions

What engine is in the Case Ih 6130?

The Case IH 6130 is equipped with an 8.7L Case IH FPT diesel engine, producing 320 horsepower.

What is the grain tank capacity on a 6130?

The grain tank capacity on a Case IH 6130 is approximately 300 bushels, and it has an unloading rate of about 192 bushels per minute.

What type of separator does the 6130 have?

The 6130 utilizes a single axial-flow rotor system for threshing and separating grain. The rotor is 30 inches in diameter.

What are common parts needed for the 6130?

Common wear parts for the Case IH 6130 include concaves, rasp bars, belts, chains, bearings, auger fingers, and sickle sections. Keeping these parts in good condition ensures optimal performance.

Showing 49-72 of 87 products

Sort by: