Skip to main content
(828) 649-7190
Same Day Shipping Before 2pm EST

Kohler Command Air Filter: CH & CV Series Engines

The Kohler Command engine is a workhorse. Learn how to maintain peak performance with the right air filter for your CH and CV series engine. Find part numbers, maintenance tips, and more.

Introduction to Kohler Command Air Filters: CH & CV Series

The Kohler Command series engine is known for its reliability and power, found in a wide range of outdoor power equipment, including riding mowers, zero-turn mowers, and even some larger snow blowers. To keep your Kohler Command engine running at its best, a clean and properly functioning air filter is absolutely critical. This guide focuses specifically on Kohler Command air filters designed for the CH (horizontal shaft) and CV (vertical shaft) engine series.

Recommended Parts for This Guide

10 parts we recommend — in stock, ships fast, one-click add to cart.

🔍 Looking for a specific part? Try our AI Part Finder — tell it your equipment and what you need, and it will find matching parts instantly.

A dirty or damaged air filter restricts airflow to the engine, leading to:

  • Reduced engine power
  • Increased fuel consumption
  • Overheating
  • Premature engine wear
  • Black smoke from the exhaust

Replacing your kohler command air filter regularly is a simple and cost-effective way to prevent these problems and extend the life of your engine. At Madison Tractor, we carry a wide selection of genuine Kohler air filters and high-quality aftermarket alternatives to fit your needs and budget.

Understanding CH & CV Series Engine Air Filters

The Kohler Command CH and CV series engines share similar air filter designs, though subtle differences may exist based on the specific engine model and horsepower. These engines can be found on machines from brands like John Deere, Craftsman, Cub Cadet, Husqvarna, Toro, Ariens, Murray, Hustler, Scag, Exmark, Ferris, Snapper, Simplicity, and Dixie Chopper. Always consult your engine's owner's manual for the exact part number and recommended replacement schedule.

Common types of kohler command air filters found in these engines include:

  • Paper Air Filters: Typically pleated paper elements that provide excellent filtration. Often used with a pre-cleaner.
  • Foam Pre-Cleaners: These oiled foam sleeves fit over the paper air filter to capture larger debris, extending the life of the paper filter.
  • Combination Filters: Some filters combine paper and foam elements into a single unit.

When purchasing a replacement kohler command air filter, ensure it's the correct type and size for your specific engine model. Using the wrong filter can compromise engine performance and potentially cause damage.

Finding the Correct Kohler Command Air Filter Part Number

The easiest way to find the correct kohler command air filter part number is to:

  1. Check Your Engine's Owner's Manual: The manual will list the correct air filter part number and other maintenance information.
  2. Look for the Part Number on the Old Filter: The Kohler part number is often printed directly on the air filter housing or the filter itself.
  3. Use Madison Tractor's Parts Lookup Tool: Enter your engine model number into our online parts lookup tool to find compatible air filters and other parts.

Some common Kohler Command air filter part numbers include (but are not limited to – always verify fitment with your specific engine):

If you're having trouble finding the right part number, our knowledgeable team at Madison Tractor is always happy to assist you. Contact us with your engine model number, and we'll help you find the correct kohler command air filter for your equipment.

Replacing Your Kohler Command Air Filter: A Step-by-Step Guide

Replacing your kohler command air filter is a straightforward process that most homeowners can easily handle. Here's a general step-by-step guide:

  1. Safety First! Disconnect the spark plug wire(s) to prevent accidental starting. Let the engine cool completely.
  2. Locate the Air Filter Housing: This is usually a plastic or metal housing near the top of the engine.
  3. Open the Air Filter Housing: Most housings are secured with clips, screws, or wing nuts. Remove these fasteners.
  4. Remove the Old Air Filter: Carefully remove the old air filter and any foam pre-cleaners.
  5. Clean the Air Filter Housing: Use a brush or shop vacuum to remove any dirt, debris, or leaves from the air filter housing.
  6. Install the New Air Filter: Place the new air filter into the housing, ensuring it's properly seated. If using a foam pre-cleaner, lightly oil it with air filter oil before installing it over the paper filter.
  7. Reassemble the Air Filter Housing: Reattach the cover and secure it with the clips, screws, or wing nuts.
  8. Reconnect the Spark Plug Wire(s): Reconnect the spark plug wire(s).

Important Notes:

  • Always refer to your engine's owner's manual for specific instructions and torque specifications.
  • Inspect the air filter housing for any cracks or damage. Replace the housing if necessary.
  • When installing a foam pre-cleaner, use a dedicated air filter oil. Do not use motor oil or other lubricants.

Maintaining Your Kohler Command Air Filter

Regular maintenance can extend the life of your kohler command air filter and improve engine performance.

  • Check the Air Filter Regularly: Inspect the air filter every 25 hours of operation, or more frequently in dusty conditions.
  • Clean Foam Pre-Cleaners: If your engine uses a foam pre-cleaner, clean it every 25 hours of operation. Wash the pre-cleaner in warm, soapy water, rinse thoroughly, and allow it to dry completely. Then, lightly oil it with air filter oil before reinstalling.
  • Replace the Air Filter as Needed: Replace the air filter when it becomes heavily soiled, damaged, or after 100 hours of operation (or as recommended in your owner's manual).

Proper air filter maintenance is essential for preventing engine damage and maintaining optimal performance. In addition to air filters, remember to service other critical components like belts, blades, spindles, pulleys, spark plugs and other filters such as Kohler Oil Filter Cross Reference.

Troubleshooting Common Air Filter Problems

Here are some common problems related to kohler command air filter and their potential solutions:

  • Engine Running Rough: A dirty or clogged air filter can restrict airflow and cause the engine to run rough. Clean or replace the air filter.
  • Black Smoke from Exhaust: This indicates that the engine is running rich (too much fuel). A clogged air filter is a common cause.
  • Reduced Engine Power: A dirty air filter can starve the engine of air, reducing power.
  • Air Filter Getting Dirty Quickly: This could indicate a problem with the air filter housing seal. Inspect the housing and replace the seal if necessary. Consider using a higher-quality air filter designed for dusty conditions.

If you're experiencing persistent engine problems, consult a qualified mechanic.

Expand your knowledge of outdoor power equipment maintenance by exploring these related articles:

Shop Kohler Command Air Filters at Madison Tractor

Madison Tractor Company is your trusted source for genuine Kohler parts and high-quality aftermarket alternatives. We offer a wide selection of kohler command air filters, as well as air, oil, and fuel filters, belts, blades, spindles, and other essential parts for your outdoor power equipment. Shop with confidence knowing that you're getting the right parts at competitive prices, backed by our expert support team. Keep your equipment running strong with Madison Tractor!

🔍 Can't Find Your Part?

Use our AI-Powered Part Finder to search by your equipment's make, model, and what you need. It's the fastest way to find the exact part for your machine.

Try the Part Finder →