Skip to main content
(828) 649-7190
Same Day Shipping Before 2pm EST

Exmark Mower Blades: Lazer Z & Radius Part Numbers

Finding the correct Exmark mower blades for your Lazer Z or Radius mower can be tricky. This guide provides the information you need to identify the right blade, including part numbers, sizing considerations, and safety tips.

Introduction to Exmark Mower Blades

Exmark is a leading name in commercial-grade lawn care equipment, known for its robust and reliable zero-turn mowers. Two of their most popular lines are the Lazer Z and Radius series. Maintaining these mowers with the correct parts, especially the blades, is crucial for optimal performance and a pristine cut. At Madison Tractor Company, we understand the importance of using the right Exmark mower blades. This guide will help you find the correct blade for your specific Exmark Lazer Z or Radius model, ensuring you get the best possible results from your mower.

Recommended Parts for This Guide

10 parts we recommend — in stock, ships fast, one-click add to cart.

🔍 Looking for a specific part? Try our AI Part Finder — tell it your equipment and what you need, and it will find matching parts instantly.

We carry a wide range of mower parts for many brands. Be sure to check out our guides on John Deere mower blades, Craftsman 42 inch mower blades, Cub Cadet mower blades, Husqvarna mower blades, Toro mower blades, Scag mower blades, Hustler mower blades and Murray mower blades too!

Identifying Your Exmark Model & Deck Size

Before you can find the correct blade, you need to know your Exmark mower's model number and deck size. This information is usually found on a sticker or plate located on the mower deck or frame. Common deck sizes for Lazer Z and Radius models range from 48 inches to 72 inches. Accurately identifying these details will significantly narrow down your blade options.

For example, a Lazer Z E-Series with a 60-inch deck will require different blades than a Radius X-Series with a 52-inch deck. Note the model number the deck size in inches.

Exmark Blade Types and Part Numbers

Exmark offers several blade types for different cutting conditions and preferences. The most common types

  • Standard Blades These blades provide a good all-around cut for typical lawn conditions.
  • Mulching Blades Designed to finely chop grass clippings and return them to the lawn as fertilizer.
  • High-Lift Blades These blades create more airflow, resulting in better grass lifting and discharge, especially in thick or wet grass.
  • Marbain Blades Known for their durability and extended lifespan.

Here are some common Exmark blade part numbers for Lazer Z and Radius models. Note that this is not an exhaustive list you should always verify the correct part number for your specific model

Lazer Z Series

Deck Size Blade Length (Approximate) Blade Type Exmark Part Number
60-inch 21 inches Standard -S
60-inch 21 inches Mulching -S
60-inch 21 inches High-Lift -S
72-inch 24.5 inches Standard -S
72-inch 24.5 inches Mulching -S
72-inch 24.5 inches High-Lift -S

Radius Series

Deck Size Blade Length (Approximate) Blade Type Exmark Part Number
52-inch 18 inches Standard -S
52-inch 18 inches Mulching -S
52-inch 18 inches High-Lift -S
60-inch 21 inches Standard -S
60-inch 21 inches Mulching -S
60-inch 21 inches High-Lift -S

Important Note Always double-check your mower's operator manual or the Exmark website for the most accurate and up-to-date part numbers for your specific model. Using the wrong blade can damage your mower and compromise cutting performance.

Replacing Your Exmark Mower Blades: A Step-by-Step Guide

Replacing your Exmark mower blades is a straightforward process, but it's essential to prioritize safety. Here's a step-by-step guide

  1. Safety First Disconnect the spark plug wire to prevent accidental starting. Wear heavy-duty gloves to protect your hands.
  2. Lift the Mower Use a jack to safely lift the mower. Ensure it is securely supported. Never work under a mower supported only by a jack.
  3. Remove the Old Blades Use a wrench or socket to loosen and remove the blade bolts or nuts. Note the orientation of the blade and any washers or spacers.
  4. Inspect the Spindles While the blades are off, inspect the spindles for any signs of damage or wear. Replace them if necessary. We also carry a wide variety of spindles to keep your mower running smoothly.
  5. Install the New Blades Align the new blade with the spindle and reinstall the bolt or nut. Ensure the blade is installed with the correct side facing the grass. The cutting edge should point in the direction of rotation.
  6. Torque the Bolts Tighten the blade bolts to the torque specification listed in your mower's operator manual. Over-tightening can damage the spindle, while under-tightening can cause the blade to come loose.
  7. Lower the Mower Carefully lower the mower back to the ground.
  8. Reconnect the Spark Plug Reconnect the spark plug wire.

Warning Blades are sharp. Wear gloves and use caution when handling mower blades to prevent injury. Always disconnect the spark plug before working on your mower.

Maintaining Your Exmark Mower Blades

Proper blade maintenance can extend the life of your blades and improve your mower's performance. Here are some tips

  • Sharpen Regularly Sharpen your blades every 25 hours of use or as needed. A dull blade tears the grass, leading to browning and disease.
  • Balance the Blades After sharpening, balance the blades to prevent vibration and uneven cutting.
  • Inspect for Damage Regularly inspect your blades for cracks, bends, or other damage. Replace damaged blades immediately.
  • Clean the Blades Remove grass buildup from the blades after each use. This helps prevent corrosion and ensures optimal airflow.

Alongside blades, regular maintenance is key. Don't forget to check your belts, pulleys, filtersspark plugs too.

Choosing the Right Blade for Your Needs

The best blade for your Exmark mower depends on your specific needs and cutting conditions. Consider the following

  • Grass Type Different grass types require different blade types. For example, thick, dense grass may benefit from high-lift blades, while finer grasses may do well with standard blades.
  • Cutting Frequency If you mow frequently, you may prefer Mulching Blades to return nutrients to the soil.
  • Terrain If you mow on uneven terrain or areas with rocks and debris, consider using heavier-duty blades or blades with a hardened cutting edge.
  • Personal Preference Ultimately, the best blade is the one that provides the cut quality and performance you desire.

Other Brands We Support

Madison Tractor Company is your one-stop shop for outdoor power equipment parts. Besides Exmark, we also carry parts for John Deere, Craftsman, Cub Cadet, Husqvarna, Toro, Ariens, Murray, Hustler, Scag, Ferris, Snapper, Simplicity Dixie Chopper. Whether you need bearings, shear pins, or anything else to keep your equipment running smoothly, we've got you covered.

Shop Exmark Mower Blades at Madison Tractor Company

Finding the right Exmark mower blades for your Lazer Z or Radius mower doesn't have to be a chore. With the information in this guide, you can confidently select the correct blade and keep your mower running at its best. At Madison Tractor Company, we're committed to providing you with high-quality parts and exceptional customer service. Browse our selection of Exmark mower blades today and experience the difference!

🔍 Can't Find Your Part?

Use our AI-Powered Part Finder to search by your equipment's make, model, and what you need. It's the fastest way to find the exact part for your machine.

Try the Part Finder →