Cub Cadet 50-Inch Blades: XT1, XT2 & LTX Models
Need replacement blades for your Cub Cadet 50-inch deck? This guide covers blade types, part numbers, and helpful tips for XT1, XT2, and LTX models. Get the perfect cut with the right blades from Madison Tractor.
Introduction to Cub Cadet 50-Inch Mower Blades
If you own a Cub Cadet XT1, XT2, or LTX series mower with a 50-inch cutting deck, you know the importance of having the right blades. Dull or damaged blades can lead to uneven cuts, stressed grass even damage to your mower. This guide from Madison Tractor Company will walk you through everything you need to know about Cub Cadet 50 inch blades, ensuring you get the best performance from your machine.
Recommended Parts for This Guide
1 part we recommend — in stock, ships fast, one-click add to cart.
🔍 Looking for a specific part? Try our AI Part Finder — tell it your equipment and what you need, and it will find matching parts instantly.
We’ll cover blade types, OEM part numbers, aftermarket options, installation tips maintenance advice. Whether you're dealing with standard discharge, mulching, or high-lift blades, we've got you covered. And remember, we carry a wide range of parts for various brands, including John Deere, Craftsman, Husqvarna, Toro, Ariens, Murray, Hustler, Scag, Exmark, Ferris, Snapper, Simplicity Dixie Chopper, so you can find everything you need at Madison Tractor.
Understanding Blade Types for 50-Inch Cub Cadet Mowers
Cub Cadet offers several blade types for their 50-inch decks, each designed for specific cutting conditions
- Standard (Discharge) Blades These blades are designed to efficiently cut grass and discharge clippings out the side of the mower. They're a good all-around choice for general mowing.
- Mulching Blades Mulching blades have a more aggressive curve and multiple cutting edges. They chop grass clippings into fine pieces and recycle them back into the lawn as fertilizer. This can lead to a healthier, greener lawn over time.
- High-Lift Blades High-lift blades create a strong vacuum that lifts the grass before cutting. This results in a cleaner, more even cut, especially in thick or damp grass. They are also great for bagging systems.
Identifying the Correct OEM Part Numbers
Note These part numbers can sometimes be superseded by newer versions. Always double-check with your Cub Cadet dealer or refer to your owner's manual to confirm the correct part number for your specific model. You can also easily search these numbers on our site to find compatible replacements.
- A-50480: Fits 48 INCH, G1548 55AE232S150 (55AE232S150 (WAM)), G1548 55AE232S150 (55AE232S750 (WAM)), G1548 55AE232S150 (55AI5GMS050 (WAM)), G1548 55AE232S150 (55AI5GMS750 (WAM)) and more. Replacement: 050480
- OEM-754-0142: Fits 240-600, 240-600A, 240-602A, 241-595, 241-600 and more. Replacement: 7540142
- 754-0142: Fits 240-600, 240-600A, 240-602A, 241-595, 241-600 and more. Replacement: 7540142
- 954-0142: Fits 240-600, 240-600A, 240-602A, 241-595, 241-600 and more. Replacement: 7540142
- A-9540142: Fits 240-600, 240-600A, 240-602A, 241-595, 241-600 and more. Replacement: 7540142
- MXV4520: Fits 1030 (w/ 30" deck), 130-793, 130-795, 130-796, 132-510 and more. Replacement: 7540264
- OEM-754-0264: Fits 1030 (w/ 30" deck), 130-793, 130-795, 130-796, 132-510 and more. Replacement: 7540264
- 754-0264: Fits 1030 (w/ 30" deck), 130-793, 130-795, 130-796, 132-510 and more. Replacement: 7540264
Choosing Aftermarket Mower Blades
While OEM blades are a reliable choice, aftermarket blades can offer comparable performance at a potentially lower cost. When selecting aftermarket blades, consider the following
- Blade Material Look for blades made from high-quality steel that are hardened and tempered for durability.
- Blade Thickness Ensure the blade thickness matches or exceeds the OEM specifications for your mower.
- Blade Length and Width Double-check that the blade dimensions match your 50-inch deck requirements.
- Customer Reviews Read reviews from other users to get an idea of the blade's performance and longevity.
At Madison Tractor, we offer a selection of high-quality aftermarket blades that are compatible with Cub Cadet 50-inch mowers. Be sure to check the product descriptions for compatibility information.
Replacing Your Cub Cadet 50-Inch Mower Blades: A Step-by-Step Guide
Replacing your mower blades is a straightforward process, but it's essential to follow safety precautions. Here's a step-by-step guide
- Safety First Disconnect the spark plug wire to prevent accidental starting. Wear heavy-duty gloves to protect your hands.
- Raise the Mower Deck Use a jack or ramps to safely elevate the mower deck. Ensure the mower is stable and secure before proceeding.
- Block the Blades Use a wood block or blade removal tool to prevent the blades from spinning while you loosen the mounting bolts.
- Remove the Old Blades Use a wrench or socket to loosen and remove the blade mounting bolts. Note the orientation of the blades and any washers or spacers.
- Inspect the Spindles While the blades are off, inspect the spindles for any signs of damage or wear. Replace them if necessary. You can find replacement spindles at Madison Tractor.
- Install the New Blades Align the new blades with the mounting holes, ensuring they are installed in the correct orientation. Reinstall any washers or spacers.
- Tighten the Bolts Tighten the blade mounting bolts to the manufacturer's specified torque. Use a torque wrench to ensure proper tightness.
- Lower the Mower Deck Carefully lower the mower deck back to the ground.
- Reconnect the Spark Plug Wire Reconnect the spark plug wire.
Safety Warning Always wear heavy-duty gloves when handling mower blades. A sharp blade can cause serious injury.
Maintaining Your Cub Cadet 50-Inch Mower Blades
Proper maintenance can extend the life of your mower blades and improve cutting performance. Here are some tips
- Sharpen Blades Regularly Sharpen your blades every 25 hours of use, or more often if you notice a decrease in cutting performance. A dull blade tears the grass rather than cutting it cleanly, which can damage your lawn and stress the engine.
- Balance Blades After Sharpening Use a blade balancer to ensure the blades are evenly balanced. An unbalanced blade can cause vibrations that can damage your mower.
- Inspect for Damage Regularly inspect your blades for cracks, bends, or other damage. Replace damaged blades immediately.
- Clean Blades After Each Use Remove grass clippings and debris from the blades after each use. This will help prevent rust and corrosion.
Common Issues and Troubleshooting
Here are some common issues you might encounter with your Cub Cadet 50-inch mower blades how to troubleshoot them
- Uneven Cut This can be caused by dull blades, unbalanced blades, or an uneven mower deck. Sharpen or replace the blades, balance them adjust the mower deck as needed.
- Vibration This is often caused by unbalanced blades. Balance your blades after sharpening. If the vibration persists, inspect the spindles for damage.
- Grass Tearing This is a sign of dull blades. Sharpen or replace your blades.
- Blade Slipping This can be caused by worn or damaged belts or pulleys. Inspect the belts and pulleys and replace them if necessary.
Beyond Blades: Other Essential Cub Cadet Maintenance Parts
Maintaining your Cub Cadet mower involves more than just replacing the blades. Here are some other essential parts to keep an eye on
- Belts Replace belts when they show signs of wear, such as cracking or fraying.
- Spindles Inspect spindles regularly for damage or wear. Replace them if necessary.
- Filters Change the air filter and oil filter regularly to keep your engine running smoothly.
- Spark Plugs Replace the spark plugs annually or as needed to ensure proper ignition.
- Bearings Check the bearings in the wheels and spindles for wear. Replace them if they are loose or noisy.
For more information on maintaining your Cub Cadet mower, check out our other articles, such as Cub Cadet Mower Blades: All Models & Deck Sizes. We also offer similar guides for other brands like John Deere Mower Blades: OEM Part Numbers by Model and Craftsman 42-Inch Mower Blades: Sizes & Part Numbers.
Find Your Cub Cadet 50-Inch Blades and More at Madison Tractor
Ready to get your Cub Cadet mower back in top shape? Madison Tractor Company has a wide selection of Cub Cadet 50 inch blades, as well as other essential parts like belts, spindles, filters spark plugs. We carry parts for Cub Cadet XT1, XT2, LTX series more. Shop our selection today and experience the Madison Tractor difference!
Shop Cub Cadet Mower Parts Now!
🔍 Can't Find Your Part?
Use our AI-Powered Part Finder to search by your equipment's make, model, and what you need. It's the fastest way to find the exact part for your machine.
Try the Part Finder →Part of our comprehensive guide
Mower Blade Buying Guide: Find the Right Blades for Your Mower








