Murray 633124X89C Snow Blower Thrower Parts
The Murray 633124X89C snow blower, a popular choice for homeowners during the late 1990s and early 2000s, is a gas-powered, two-stage machine designed for efficient snow removal. Typically featuring a 24-26 inch clearing width, this model was favored for its balance of power and maneuverability. Its robust design helped clear moderate to heavy snowfall from driveways and walkways.
The Murray 633124X89C snow blower was a staple in many households during the late 1990s and early 2000s. While specific production years may vary, this model gained recognition for its reliable performance in residential snow removal. Typically powered by a Briggs & Stratton or Tecumseh engine ranging from 5 to 7 horsepower, some models may have offered an electric start option for added convenience. As a two-stage snow blower, the 633124X89C utilizes an auger to break up the snow and then an impeller to throw it away from the clearing path. The clearing width is commonly between 24 and 26 inches, with an intake height of around 20 inches, allowing it to handle significant snowfall. Throwing distance varies depending on snow conditions but generally reaches up to 30 feet. The drive system is typically wheel-driven, offering multiple forward and reverse speeds for enhanced control. Most models feature a manual chute control, allowing the operator to adjust the direction of the thrown snow. Some versions may include a headlight for improved visibility in low-light conditions. While heated grips were not a standard feature on this model, its overall design made it suitable for handling moderate to heavy snowfalls on driveways, walkways, and other residential areas.
Specifications
| Engine | Briggs & Stratton or Tecumseh 5-7 HP, Electric Start Optional |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 24-26 inches |
| Intake Height | 20 inches |
| Throwing Distance | Up to 30 ft |
| Drive System | Wheel - Multiple Forward/Reverse Speeds |
| Fuel Tank | 1.5 gallons (approximate) |
| Weight | 150-200 lbs (approximate) |
| Years Produced | Late 1990s - Early 2000s |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger and impeller for any signs of wear, damage, or bending. Replace any damaged parts to maintain optimal performance.
- Shear Pin Replacement: Keep spare shear pins on hand and replace them immediately if the auger stops turning while the engine is still running. Using incorrect shear pins can cause serious damage.
- Oil Changes and Fuel Stabilizer: Change the engine oil at least once a year, following the manufacturer's recommendations. Add fuel stabilizer to the gas tank before storing the snow blower for the off-season to prevent fuel degradation.
- Skid Shoe Adjustment: Adjust the skid shoes to the appropriate height for your surface. This prevents damage to the snow blower and the clearing surface.
History & Background
The Murray 633124X89C was introduced as a mid-range snow blower offering a balance of power and affordability for homeowners. While specific redesigns were limited during its production run, the model saw variations in engine brands and minor feature tweaks. Its significance lies in providing a reliable and accessible option for residential snow removal, contributing to Murray's reputation in the outdoor power equipment market.
Frequently Asked Questions
What engine is in the Murray 633124X89C?
The Murray 633124X89C typically uses a Briggs & Stratton or Tecumseh engine, ranging from 5 to 7 horsepower. Some models may have featured an optional electric start.
What is the clearing width of the 633124X89C?
The Murray 633124X89C has a clearing width of approximately 24 to 26 inches and an intake height of around 20 inches.
Is the 633124X89C a single-stage or two-stage snow blower?
The Murray 633124X89C is a two-stage snow blower. This means it uses an auger to gather and break up the snow, then an impeller to throw the snow out of the chute.
What are common parts needed for the 633124X89C?
Common replacement parts for the Murray 633124X89C include shear pins, drive belts, auger belts, scraper bar, skid shoes, spark plugs, and fuel filters.
