Murray 1695753-18-2852-30-13 Snow Blower Thrower Parts
The Murray 1695753, often appearing with model variants like 18-2852-30 13, is a gas-powered snow thrower commonly used for residential snow removal. Known for its robust build and reliable performance, it typically features a two-stage design for efficient snow clearing. This model became popular due to its balance of power, affordability, and ease of use for homeowners.
The Murray 1695753 snow blower series was a popular choice for homeowners seeking a reliable and capable snow removal solution. While the exact production years can vary depending on the specific sub-model (e.g., 18-2852-30 13), these models were prevalent in the late 1990s and early 2000s. These snow blowers typically utilized a Briggs & Stratton or Tecumseh engine, ranging from 5 to 8 horsepower. Many offered an optional electric start for easier starting in cold weather. As a two-stage snow blower, the Murray 1695753 employs an auger to break up snow and an impeller to throw it through the discharge chute. Clearing widths ranged from 24 to 28 inches, with intake heights around 20-21 inches, making them suitable for moderate snowfall. Depending on the model and snow conditions, throwing distances could reach up to 30 feet. The drive system typically involves wheels with multiple forward and reverse speeds, allowing for easy maneuverability. Chute control is usually manual, with a crank or lever to adjust the direction of the snow stream. Some models featured a headlight for improved visibility during early morning or evening snow removal. These models are ideal for homeowners dealing with moderate to heavy snowfall on driveways, sidewalks, and patios.
Specifications
| Engine | Briggs & Stratton or Tecumseh 5-8 HP Electric Start Optional |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 24-28 inches |
| Intake Height | 20-21 inches |
| Throwing Distance | Up to 30 ft |
| Drive System | Wheel - 4-6 Forward / 1-2 Reverse |
| Fuel Tank | 1-1.5 gallons |
| Weight | Approximately 150-200 lbs |
| Years Produced | Late 1990s - Early 2000s |
Maintenance Tips
- Regularly inspect the auger and impeller for damage: Check for bent or broken paddles and ensure they rotate freely. Replace any damaged parts promptly.
- Replace shear pins as needed: These are designed to break under excessive load, protecting the auger and gearbox. Always have spare shear pins on hand.
- Check belt tension and condition: Inspect belts for cracks, fraying, or excessive wear. Adjust tension or replace belts as necessary to ensure proper power transmission.
- Use fuel stabilizer: Add fuel stabilizer to the fuel tank before storing the snow blower for the off-season to prevent fuel degradation and carburetor issues.
History & Background
The Murray 1695753 series snow blowers were introduced as a mid-range option for homeowners seeking a balance between affordability and performance. While there weren't significant redesigns during its production run, minor updates and variations existed within the series. It played a significant role in the residential snow blower market by offering a reliable and accessible solution for snow removal.
Frequently Asked Questions
What engine is in the Murray 1695753 18-2852-30 13?
The Murray 1695753 series typically uses either a Briggs & Stratton or Tecumseh engine. Horsepower generally ranges from 5 to 8 HP, and some models offer an electric start option for easier cold-weather starting.
What is the clearing width of the 1695753 18-2852-30 13?
The clearing width for the Murray 1695753 18-2852-30 13 snow blower is typically between 24 and 28 inches. The intake height is approximately 20-21 inches.
Is the 1695753 18-2852-30 13 a single-stage or two-stage snow blower?
The Murray 1695753 18-2852-30 13 is a two-stage snow blower. This means it uses an auger to collect and break up the snow, and then an impeller to forcefully throw the snow out of the discharge chute.
What are common parts needed for the 1695753 18-2852-30 13?
Commonly needed parts for the Murray 1695753 18-2852-30 13 include shear pins, drive belts, auger belts, auger paddles, scraper bar, skid shoes, spark plugs, and fuel filters. Regularly replacing these parts ensures optimal performance and prevents more significant repairs.
