Mtd Cub Cadet White E642E Snow Blower Thrower Parts
The MTD Cub Cadet White E642E snow blower, likely manufactured in the late 1990s and early 2000s, is a popular choice for homeowners due to its reliable gas-powered engine and efficient two-stage design. With a 24-inch clearing width, it's well-suited for clearing driveways and sidewalks after moderate to heavy snowfalls. This model offered a balance of power and maneuverability for residential snow removal tasks.
The MTD Cub Cadet White E642E represents a dependable snow-clearing solution from MTD's lineup. While exact years of production can vary, this model was prominent during the late 1990s and early 2000s. Typically, it features a Tecumseh or Briggs & Stratton engine, delivering approximately 5-6 HP (engine specifics can vary, check your model). Electric start was often an available option, making cold-weather starts easier. As a two-stage snow blower, it employs an auger to gather snow and an impeller to discharge it, offering improved throwing distance compared to single-stage models. The E642E usually boasts a clearing width of 24 inches and an intake height of around 20-21 inches, allowing it to handle substantial snowfall. It is capable of throwing snow up to 30-35 feet. Typically, it utilizes a wheel drive system with multiple forward and reverse speeds for enhanced control. Manual chute controls are standard, allowing for easy adjustment of the snow discharge direction. While it may not have features like heated grips, the E642E is suitable for homeowners facing moderate to heavy snowfalls on driveways and walkways. It's a good fit for areas with average snow accumulations where a reliable and moderately sized snow blower is needed.
Specifications
| Engine | Tecumseh or Briggs & Stratton 5-6 HP (Check your specific model) Electric Start Optional |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 24 inches |
| Intake Height | 20-21 inches |
| Throwing Distance | Up to 35 ft |
| Drive System | Wheel - Multiple Forward/Reverse Speeds |
| Fuel Tank | 1-1.5 gallons (Varies by exact model) |
| Weight | Approximately 180-200 lbs |
| Years Produced | Late 1990s - Early 2000s (Approximate) |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for damage, wear, or bending. Replace damaged parts promptly to maintain optimal snow-clearing performance.
- Replace Shear Pins: Keep extra shear pins on hand. If the auger suddenly stops, it's likely a shear pin broke. Replace it immediately after removing the obstruction.
- Fuel Stabilizer: Add fuel stabilizer to the fuel tank before storing the snow blower for the off-season to prevent fuel degradation and carburetor issues. Drain the fuel completely if possible.
History & Background
The MTD Cub Cadet White E642E was a popular model during the late 1990s and early 2000s, representing MTD's commitment to providing reliable and affordable snow removal equipment. It stood out for its two-stage design and ease of use, solidifying its place as a common choice for homeowners dealing with moderate snow accumulations. It was part of a broader line of snow blowers from MTD, designed to offer various features and price points.
Frequently Asked Questions
What engine is in the Mtd Cub Cadet White E642e?
The E642e typically features a Tecumseh or Briggs & Stratton engine, with horsepower ranging from 5 to 6 HP. Electric start was an option on some models. Check the engine label for specific details on your unit.
What is the clearing width of the E642e?
The Mtd Cub Cadet White E642e has a clearing width of 24 inches and an intake height of approximately 20-21 inches.
Is the E642e a single-stage or two-stage snow blower?
The E642e is a two-stage snow blower. It utilizes an auger to gather and break up snow, then an impeller to throw the snow through the discharge chute. This two-stage design provides greater throwing distance and the ability to handle heavier, wetter snow.
What are common parts needed for the E642e?
Commonly needed parts for the E642e include shear pins (auger and impeller), belts (auger and drive), scraper bar, skid shoes, spark plugs, and fuel filters. Regular inspection and replacement of these parts will help ensure the snow blower operates efficiently and reliably.
