Mtd Cub Cadet White 719 Snow Blower Thrower Parts
719 parts and accessories
The Mtd Cub Cadet White 719 snow thrower was a popular choice for homeowners seeking a reliable gas-powered solution for snow removal. These models, primarily manufactured in the late 1990s and early 2000s, typically featured a two-stage design with a clearing width around 26-28 inches. Its robust build and efficient snow-throwing capability made it a dependable option for clearing driveways and walkways.
The Mtd Cub Cadet White 719 series snow blowers were workhorse machines designed for tackling moderate to heavy snowfall. Production spanned across several years, offering consistent performance throughout its run. These models were generally equipped with Tecumseh or Briggs & Stratton engines, typically ranging from 8 to 10 horsepower. Many offered the convenience of an electric start option. Being a two-stage snow blower, the 719 utilizes an auger to break up the snow and an impeller to throw it away from the machine. The clearing width on most 719 models is around 26 to 28 inches, with an intake height of approximately 20-21 inches. This allows it to handle substantial snow depths. Throwing distances typically reached up to 30-40 feet, depending on snow conditions. The drive system is typically wheel-driven, featuring multiple forward and reverse speeds for enhanced maneuverability. Chute controls are usually manual, allowing the operator to adjust the direction and angle of the snow discharge. Some models included a headlight for improved visibility during early morning or evening snow removal. While heated grips were not a standard feature, the 719 was well-suited for residential driveways, walkways, and smaller commercial properties experiencing moderate to heavy snowfall.
Specifications
| Engine | Tecumseh / Briggs & Stratton 8-10 HP, Electric Start Option |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 26-28 inches |
| Intake Height | 20-21 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - Multiple Forward/Reverse |
| Fuel Tank | 1.5 gallons |
| Weight | Approx. 200 lbs |
| Years Produced | Late 1990s - Early 2000s |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for wear and damage. Replace worn or damaged parts to maintain optimal snow throwing performance.
- Replace Shear Pins: Keep extra shear pins on hand. These protect the auger gearbox and should be replaced immediately if broken after hitting ice or debris.
- Oil Changes and Fuel Stabilizer: Change the engine oil annually. Add fuel stabilizer to the gas tank before storing the snow blower for the off-season to prevent fuel degradation and carburetor issues.
- Adjust Skid Shoes: Ensure the skid shoes are properly adjusted to prevent damage to your driveway or sidewalks. Adjust them based on the surface type you're clearing.
History & Background
The Mtd Cub Cadet White 719 snow blower was introduced as a mid-range option for homeowners needing more power than a single-stage but without the bulk of larger commercial models. While there weren't major redesigns during its production, consistent performance and reliability solidified its position as a popular choice for snow removal.
Frequently Asked Questions
What engine is in the Mtd Cub Cadet White 719?
The Mtd Cub Cadet White 719 snow blower is typically equipped with either a Tecumseh or Briggs & Stratton engine, ranging from 8 to 10 horsepower. Electric start was often an available option.
What is the clearing width of the 719?
The clearing width of the Mtd Cub Cadet White 719 is typically between 26 and 28 inches, with an intake height of around 20-21 inches.
Is the 719 a single-stage or two-stage snow blower?
The Mtd Cub Cadet White 719 is a two-stage snow blower. It uses an auger to collect and break up the snow, then an impeller to forcefully throw it away from the machine.
What are common parts needed for the 719?
Common wear parts for the Mtd Cub Cadet White 719 include shear pins, drive belts, auger belts, scraper bar, skid shoes, spark plugs, and fuel filters. Regularly replacing these parts helps maintain optimal performance.
