Mtd Cub Cadet White 13AQ608H729 Riding Mower Parts
Replacement parts for the Mtd Cub Cadet White 13AQ608H729 Riding Mower. Browse our selection of OEM and aftermarket parts — filters, belts, hydraulics, electrical, and more.
The Mtd Cub Cadet White 13AQ608H729 riding mower, likely manufactured in the early to mid-2000s, was a popular choice for homeowners with medium-sized lawns. Known for its reliability and ease of use, this model typically features a single-cylinder engine and a comfortable operator platform. Keep your 13AQ608H729 running smoothly with our wide selection of replacement parts.
About the 13AQ608H729
The Mtd Cub Cadet White 13AQ608H729 riding mower was a solid entry in the Cub Cadet lineup, offering a balance of affordability and performance for residential use. While the exact introduction year is difficult to pinpoint, the model likely debuted in the early to mid-2000s. These mowers were typically powered by a single-cylinder engine, most commonly a Briggs & Stratton or Kohler, in the 12.5 to 17.5 HP range. Engine displacement would range from approximately 344cc to 500cc depending on the specific engine installed. Transmission types varied but often included a gear-drive transmission for basic models or a hydrostatic transmission for smoother operation. The 13AQ608H729 typically featured a 42-inch cutting deck, ideal for lawns ranging from half an acre to an acre in size. Key features included a comfortable seat, easy-to-use controls, and a durable steel frame. This model distinguished itself with its simple design, making it easy to maintain and repair, appealing to homeowners seeking a reliable and straightforward lawn care solution.
13AQ608H729 Specifications
| Engine | Briggs & Stratton or Kohler 12.5-17.5 HP 344-500cc Single-Cylinder |
|---|---|
| Transmission | Gear or Hydrostatic |
| Deck Size | 42 inches |
| Ground Speed | 5-6 mph |
| Fuel Capacity | 1.5 gallons |
| Weight | 400-450 lbs |
| Years Produced | Early - Mid 2000s (Estimated) |
13AQ608H729 Maintenance Tips
- Belt Replacement: Inspect your deck and drive belts annually for wear and tear. Replace belts every 2-3 years, or sooner if you notice cracks, fraying, or slippage.
- Blade Sharpening: Sharpen your mower blades at least twice per season to ensure a clean cut and prevent tearing the grass. Dull blades can also strain the engine.
- Filter Changes: Replace the air filter and oil filter annually, or more frequently if you mow in dusty conditions. Clean filters allow the engine to breathe properly and extend its lifespan.
- Seasonal Storage: Before storing your mower for the winter, stabilize the fuel, change the oil, and disconnect the battery. This will help prevent fuel system problems and ensure a smooth start-up in the spring.
13AQ608H729 History & Background
The Mtd Cub Cadet White 13AQ608H729 was part of Cub Cadet's broad range of riding mowers designed for homeowners. While specific details on redesigns are scarce, Cub Cadet regularly updated its models with incremental improvements to engine technology and operator comfort. This model fit into the mid-range category, offering a good balance of power and features for typical residential lawn care.
Frequently Asked Questions
Which spindle assembly is compatible with the 13AQ608H729?
The B1MT55 - Assembly, Spindle is a compatible replacement part for your model's deck system.
What flat idler pulley is suitable for the 13AQ608H729?
A suitable replacement flat idler pulley for the 13AQ608H729 is the B1SB8602 - Flat Idlers w/ Flanges.
What are some common replacement belts for the 13AQ608H729?
For deck operation, consider the 7540486A - Belt, Deck or the 7540497 - Belt, Deck. For engine power transmission, the 9540486 - Belt, Engine is often used. If you need a specific deck drive belt, look for 75404033 - Belt, Deck Drive.
Which replacement mower blades are available for the 13AQ608H729?
A common replacement blade suitable for various mowers in this category is the B1MA2431 - BLADE-MOWER, XHT, 14-7/8", "H". Always verify the specifications against your existing blades for proper fit.

B1SB8602 - Flat Idlers w/ Flanges
SKU: B1SB8602
59 in stock

B1CO47 - Flat Idlers w/ Flanges
SKU: B1CO47
162 in stock

B1SB9517 - Spindle Shaft
SKU: B1SB9517
26 in stock

B1MT78 - MTD 918-0431C SPINDLE ASSY
SKU: B1MT78
37 in stock

B1MT77 - MTD 918-040C TORO 112-0311 SPINDLE ASSY
SKU: B1MT77
52 in stock

B1MT55 - Spindle Assembly
SKU: B1MT55
102 in stock

B1MT54 - Spindle Assembly
SKU: B1MT54
35 in stock

B1MA2431 - "H" 14-7/8" XHT BLADE-MOWER
SKU: B1MA2431
262 in stock

9540486 - Engine Belt
SKU: 9540486
2509 in stock

7540497 - Deck Belt
SKU: 7540497
Out of stock

7540486A - Deck Belt
SKU: 7540486A
2509 in stock

7540468 - Upper Drive Belt
SKU: 7540468
275 in stock

75404033 - Deck Drive Belt
SKU: 75404033
50 in stock

7540349 - Deck 46" RH Belt
SKU: 7540349
837 in stock

3L360K - Aramid Blue V-Belt (3/8" X 36" )
SKU: 3L360K
397 in stock








