Mtd Cub Cadet White 13A-660 Riding Mower Parts

Jump to Parts

The Mtd Cub Cadet White 13A-660 is a popular riding mower known for its reliability and ease of use. While specific production years are limited in available data, these models often featured Briggs & Stratton engines in the 12.5 to 13 HP range and 38-42 inch cutting decks. Owners appreciate the 13A-660 for its affordability and performance in typical residential lawn care.

The Mtd Cub Cadet White 13A-660 series riding mowers were designed as entry-level machines focused on value and usability. Although the exact introduction year is difficult to pinpoint due to variations in model designations and production cycles, these models were typically produced throughout the late 1990s and early 2000s. Engine options primarily included Briggs & Stratton single-cylinder engines, typically delivering between 12.5 and 13 horsepower, with displacements around 344cc. These models usually featured a gear-drive or hydrostatic transmission, providing variable speed control. Available deck widths commonly ranged from 38 to 42 inches, making them well-suited for average-sized residential lawns. A key feature was its straightforward design, prioritizing ease of maintenance and operation. The 13A-660 distinguishes itself from higher-end models by offering a more basic feature set, focusing on core lawn-mowing functionality for residential use.

Specifications

Engine	Briggs & Stratton 12.5-13 HP 344cc Single-Cylinder
Transmission	Gear Drive or Hydrostatic
Deck Size	38-42 inches
Ground Speed	0-5.5 mph
Fuel Capacity	1.5 gallons
Weight	450 lbs
Years Produced	Late 1990s - Early 2000s (Estimated)

Maintenance Tips

Replace the mower deck belt and drive belt every 2-3 years, or more frequently if you notice slippage or wear.
Sharpen mower blades at least once a season, or more often if you mow frequently or encounter obstacles.
Change the engine oil and filter every 25-50 hours of use, and clean or replace the air filter regularly for optimal engine performance.
Before storing the mower for the winter, stabilize the fuel, disconnect the battery, and clean the mower deck to prevent corrosion.

History & Background

The Mtd Cub Cadet White 13A-660 series represents a value-oriented offering within the Cub Cadet lineup. These models were designed to provide reliable performance for typical residential lawn care needs. While specific updates were minor during its production run, the 13A-660 established itself as a dependable and affordable choice for homeowners.

Frequently Asked Questions

What size deck does the 13A-660 have?

The Mtd Cub Cadet White 13A-660 typically comes with a 38-inch or 42-inch cutting deck. Verify the specific deck size of your model by measuring the blade length or consulting your owner's manual.

What engine is in the 13A-660?

The Mtd Cub Cadet White 13A-660 generally features a Briggs & Stratton single-cylinder engine. These engines typically produce between 12.5 and 13 horsepower.

What belt do I need for my 13A-660?

The deck belt for the 13A-660 is typically a 1/2 inch x (specific length) inch belt. The drive belt will vary based on the transmission type (gear or hydrostatic). Consult your owner's manual or measure the old belt for accurate replacement. Search our site using your model number to find the correct belt part number.

What blades fit the 13A-660?

The blades for the 13A-660 will either be approximately 19 inches long each for a 38-inch deck or 21 inches long each for a 42-inch deck. These are typically a universal star center hole blade. Double-check your owner's manual for the exact length and center hole type needed for your mower.

Showing 1-7 of 7 products

Sort by: