Massey Ferguson 825 Combine Parts
Replacement parts for the Massey Ferguson 825 Combine. Browse our selection of OEM and aftermarket parts — filters, belts, hydraulics, electrical, and more.
The Massey Ferguson 825 combine harvester, a workhorse on farms from the late 1970s through the 1980s, offered reliable performance for grain harvesting. Typically powered by a diesel engine around 105 HP, these combines were equipped with conventional threshing systems. Farmers appreciated the 825 for its simple design, ease of maintenance, and ability to efficiently harvest a variety of crops when equipped with header widths ranging from 13 to 18 feet.
About the 825
The Massey Ferguson 825 combine was a popular model produced by Massey Ferguson during the late 1970s and the 1980s. The exact years of production vary. It was generally powered by a Perkins 6.247 naturally aspirated diesel engine rated around 105 horsepower with a displacement of 247 cubic inches (4.0 liters). The 825 utilized a conventional threshing system with a cylinder width of approximately 47 inches. Grain tank capacity was around 100 bushels. The unloading auger was capable of unloading at a rate of roughly 25-30 bushels per minute. Available header widths ranged from 13 to 18 feet, allowing for adaptation to different field sizes and crop types. While specific chopper/spreader options varied, most 825 models were equipped with a straw chopper to manage residue. Cab features were basic but provided protection from the elements. The MF 825 was well-suited for harvesting wheat, soybeans, and other small grains, providing a cost-effective solution for smaller to medium-sized farms.
825 Specifications
| Engine | Perkins 6.247 105 HP 247 CID Diesel |
|---|---|
| Separator Type | Conventional - 47 inch cylinder width |
| Grain Tank | 100 bushels |
| Unloading Rate | 25-30 bu/min |
| Header Widths | 13-18 ft |
| Fuel Capacity | 30 gallons |
| Weight | 11,000 lbs |
| Years Produced | Late 1970s - 1980s |
825 Maintenance Tips
- Concave Adjustment: Regularly check and adjust concave clearance according to the crop being harvested to optimize threshing performance and minimize grain damage.
- Belt and Chain Tension: Inspect all belts and chains for proper tension and wear. Loose belts or chains can lead to inefficiencies and premature failure. Adjust or replace as needed.
- Sieve and Chaffer Cleaning: Clean the sieves and chaffers frequently to prevent buildup of debris, which can reduce cleaning efficiency and increase grain loss.
- Bearing Greasing: Regularly grease all bearings according to the manufacturer's recommendations. Proper lubrication is essential for extending bearing life and preventing costly repairs.
825 History & Background
Introduced in the late 1970s, the Massey Ferguson 825 aimed to provide a reliable and affordable combine for farmers. While not groundbreaking in terms of technological advancements, the 825 offered a simple and robust design that resonated with farmers seeking a dependable machine. It represents a significant era of conventional combines before the widespread adoption of rotary technology.
Frequently Asked Questions
Which piston liner kit is suitable for the Massey Ferguson 825 combine?
For the Perkins engine often found in the Massey Ferguson 825, we offer the U5MK0071 - Piston Liner Kit, T6.354.4.
Which ignition switch is compatible with the Massey Ferguson 825 combine?
We stock the 1874535M3 - Switch w/ Keys, which is a suitable replacement for the Massey Ferguson 825 combine.
What thermostat is recommended for the Massey Ferguson 825 combine?
We recommend the 1447384M1 - Thermostat (180°) for your Massey Ferguson 825 combine.
What are some common replacement parts for the Massey Ferguson 825 combine?
Key wear parts for the Massey Ferguson 825 combine often include the 1695447M1 - Key, Ignition, the 3583543M1 - Heater Plug, Thermostat Burner, and a 3641224M1 - Gasket, Rear Main Housing. Other important replacement components can include a 68803 - Piston or a 3637408M91 - Crankshaft, Keyed Nose, Lip Seal.

U5MK0071 - T6.354.4 Piston Liner Kit
SKU: U5MK0071
23 in stock

893501M1 - Thermostat Burner w/ Thread Connector Heater Plug
SKU: 893501M1
29 in stock

68803 - Piston
SKU: 68803
11 in stock

3641224M1 - Rear Main Housing Gasket
SKU: 3641224M1
8 in stock

3637408M91 - Lip Seal Keyed Nose Crankshaft
SKU: 3637408M91
7 in stock

3583543M1 - Thermostat Burner Heater Plug
SKU: 3583543M1
81 in stock

1874535M3 - Switch w/ Keys
SKU: 1874535M3
88 in stock

1695447M1 - Ignition Key
SKU: 1695447M1
193 in stock

1447384M1 - Thermostat (180°)
SKU: 1447384M1
135 in stock








