Skip to main content
(828) 649-7190
Same Day Shipping Before 2pm EST

Ariens Gravely ST724 Snow Blower Thrower Parts

Browse Ariens Gravely ST724 Snow Blower Thrower replacement parts. Everything from routine maintenance items to hard-to-find components.

The Ariens Gravely ST724 is a popular two-stage gas-powered snow thrower, commonly found tackling snow removal tasks from the late 1990s into the early 2000s. Known for its robust build and reliable performance, the ST724 features a 24-inch clearing width, making it ideal for homeowners and property managers needing to clear driveways and walkways. Its dependable engine and durable construction made it a sought-after model for years.

About the ST724

The Ariens Gravely ST724 enjoyed a production run primarily in the late 1990s and early 2000s, quickly establishing itself as a dependable snow removal solution. Typically powered by a Tecumseh Snow King engine, the ST724 offered around 7 horsepower with an optional electric start for easier operation in cold conditions. Being a two-stage snow blower, it utilizes a robust auger system to break up snow and ice, feeding it into a high-speed impeller that then throws the snow. The ST724 boasts a 24-inch clearing width and an intake height of around 20 inches, enabling it to handle moderate to heavy snowfall. Its throwing distance can reach up to 30-35 feet, depending on snow conditions. The drive system usually consists of a wheel drive with multiple forward and reverse speeds, allowing for good maneuverability. Chute control is typically manual, requiring the operator to physically adjust the direction of the snow discharge. While not always standard, some models included a headlight for enhanced visibility during early morning or evening snow removal. The ST724 excels in handling moderate to heavy snowfalls on paved surfaces, making it a great choice for residential driveways and walkways.

ST724 Specifications

EngineTecumseh Snow King 7 HP (Electric Start Optional)
Stage TypeTwo-Stage
Clearing Width24 inches
Intake Height20 inches
Throwing DistanceUp to 35 ft
Drive SystemWheel - 5 Forward/2 Reverse
Fuel TankApproximately 1.5 gallons
WeightApproximately 200 lbs
Years ProducedLate 1990s - Early 2000s

ST724 Maintenance Tips

  • Inspect Auger and Impeller: Regularly check the auger blades and impeller for any signs of wear, damage, or bending. Replace worn parts promptly to maintain optimal performance.
  • Replace Shear Pins: Always use the correct shear pins and keep spares on hand. Replace any broken shear pins immediately to prevent damage to the auger gearbox.
  • Use Fuel Stabilizer: Add fuel stabilizer to the gasoline before storing the snow blower for the off-season. This prevents fuel from degrading and causing starting problems next winter.
  • Check and Adjust Skid Shoes: Ensure the skid shoes are properly adjusted to prevent the scraper bar from scraping the ground. Adjust as needed based on your surface type (concrete, gravel, etc.).

ST724 History & Background

The Ariens Gravely ST724 was introduced as a reliable mid-range snow blower, designed for homeowners and light commercial use. While there weren't any major redesigns during its production, minor improvements may have been implemented over the years. Its popularity stemmed from its balance of power, clearing width, and durability, making it a dependable choice for snow removal.

Frequently Asked Questions

Which shear pin fits the Ariens Gravely ST724?

The B1SB918 - Shear Pin, 1-9/16" is a common replacement part for the ST724. Ensure to check your owner's manual for specific pin dimensions.

What auger belt is recommended for the Ariens Gravely ST724?

For the auger drive, the 72047 - Belt, Auger is designed to fit the Ariens Gravely ST724, ensuring proper auger operation.

Which roller bearing is a common replacement for the ST724?

The B1SB813 - Bearing, Roller is a frequently replaced part, suitable for various roller applications within the ST724 snow blower.

What are common parts needed for the ST724?

Common replacement parts for the ST724 include shear pins like the B1SB916 - Shear Pin, 2-1/8", auger belts such as the 72047 - Belt, Auger, and various bearings like the B1AX34 - BRNG, ID 0.500" X OD 1.375" X HT 0.438" or the B1AX35 - BRNG, ID 0.750" x OD 1.750" x HT 0.500".

Showing 1-6 of 6 products