Ariens Gravely 939302-SNO-TEK-20 Snow Blower Thrower Parts
The Ariens Gravely 939302 SNO-TEK 20 is a gas-powered, two-stage snow thrower known for its reliable performance in residential snow removal. This model, with its 20-inch clearing width, provided a balance of power and maneuverability, making it a popular choice for homeowners tackling moderate snowfall on driveways and walkways. Its ease of use and durable construction contributed to its widespread adoption.
The Ariens Gravely 939302 SNO-TEK 20 series snow blowers were designed for homeowners seeking a balance between compact size and effective snow removal capability. While the exact production years might vary, these models were typically available in the late 2000s and early 2010s. Powering the SNO-TEK 20 is a gasoline engine; specification needed for brand and hp, typically in the 5-7 HP range (example: Briggs & Stratton or LCT engine). It uses a two-stage auger system: the auger breaks up the snow and feeds it into the impeller, which then throws it out of the chute. The clearing width is 20 inches, and the intake height is around 12-15 inches, allowing it to handle moderate snow depths. Throwing distance is estimated to be up to 25-30 feet, though this varies depending on snow conditions. The drive system is wheel-driven, with typically 4-6 forward speeds and 1-2 reverse speeds. Chute control is likely manual, requiring the operator to physically adjust the chute direction. Features typically include a headlight for enhanced visibility in low-light conditions. This model is well-suited for homeowners dealing with average snowfall amounts on driveways, sidewalks, and smaller properties.
Specifications
| Engine | Unknown HP - Electric Start N |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 20 inches |
| Intake Height | 12-15 inches |
| Throwing Distance | Up to 30 ft |
| Drive System | Wheel - 4-6 Forward / 1-2 Reverse |
| Fuel Tank | Unknown gallons |
| Weight | Unknown lbs |
| Years Produced | Late 2000s - Early 2010s |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for any signs of damage or wear. Replace worn or damaged parts promptly to maintain optimal snow-throwing performance.
- Replace Shear Pins: Shear pins protect the auger gearbox from damage. Keep spare shear pins on hand and replace them immediately if they break to prevent costly repairs. Use only the correct type and size of shear pins specified by Ariens/Gravely.
- Check Belt Tension: Inspect the belts that drive the auger and impeller. Ensure they are properly tensioned to prevent slippage and maintain efficient operation. Replace worn or cracked belts as needed.
- Use Fuel Stabilizer: Add fuel stabilizer to the gasoline, especially before storing the snow blower for the off-season. This prevents fuel degradation and keeps the carburetor clean.
History & Background
The Ariens Gravely SNO-TEK 20 models, including the 939302, provided a more affordable option within the Ariens/Gravely lineup, offering a reliable two-stage snow removal solution for residential users. While not featuring the high-end features of premium models, the SNO-TEK series delivered a solid combination of power and value. These models filled a niche for homeowners needing more power than a single-stage but not requiring the heavy-duty capabilities of larger, more expensive machines.
Frequently Asked Questions
What engine is in the Ariens Gravely 939302 SNO-TEK 20?
The Ariens Gravely 939302 SNO-TEK 20 is typically powered by a gas engine (Briggs & Stratton or LCT) around 5-7 HP. Electric start might have been an option depending on the specific sub-model.
What is the clearing width of the 939302 SNO-TEK 20?
The Ariens Gravely 939302 SNO-TEK 20 has a clearing width of 20 inches and an intake height of approximately 12-15 inches.
Is the 939302 SNO-TEK 20 a single-stage or two-stage snow blower?
The Ariens Gravely 939302 SNO-TEK 20 is a two-stage snow blower. The auger breaks up and gathers the snow, and then the impeller throws it out of the discharge chute.
What are common parts needed for the 939302 SNO-TEK 20?
Common wear parts for the Ariens Gravely 939302 SNO-TEK 20 include shear pins, belts (auger and drive), auger paddles/blades, scraper bar, skid shoes, spark plugs, and fuel filters. Regularly inspecting and replacing these parts will help maintain optimal performance.
