Ariens Gravely 938011-SS522 Snow Blower Thrower Parts
The Ariens Gravely 938011 SS522 is a robust, single-stage snow thrower designed for efficient snow removal on driveways and walkways. Known for its compact size and ease of use, this gas-powered machine, likely manufactured in the late 1990s or early 2000s, features a 22-inch clearing width, making it a popular choice for homeowners dealing with light to moderate snowfall. Its simple design contributes to its reliability and affordability.
The Ariens Gravely 938011 SS522, a single-stage snow thrower, was likely produced in the late 1990s and early 2000s as a part of Ariens' Gravely line, targeting the residential market. While precise engine specifications are difficult to confirm without original documentation, it likely features a Tecumseh or Briggs & Stratton engine in the 5-6 HP range, displacing around 120-160cc. An electric start option was unlikely on this particular model. As a single-stage unit, it employs a rubber-edged auger that directly contacts the ground, scooping up snow and throwing it through the discharge chute. The clearing width is 22 inches, with an intake height suitable for clearing 6-8 inches of snow. Throwing distance is typically in the range of 20-25 feet, depending on snow conditions. The drive system relies on the auger contacting the ground to propel the machine forward, with no separate drive wheels or tracks. The chute is manually controlled, allowing the operator to adjust the direction of the snow stream. It's unlikely to include a headlight or heated grips. The SS522 is best suited for light to moderate snowfall on relatively flat surfaces like driveways, sidewalks, and patios. Because the auger contacts the ground, it is best used on paved surfaces and not gravel. The lack of a dedicated drive system makes it very easy to use and maneuver.
Specifications
| Engine | Tecumseh or Briggs & Stratton 5-6 HP (est.) No Electric Start |
|---|---|
| Stage Type | Single-Stage |
| Clearing Width | 22 inches |
| Intake Height | 6-8 inches (est.) |
| Throwing Distance | Up to 25 ft (est.) |
| Drive System | Auger Propelled - Single Speed |
| Fuel Tank | 0.75 gallons (est.) |
| Weight | 70-80 lbs (est.) |
| Years Produced | Late 1990s - Early 2000s (est.) |
Maintenance Tips
- Inspect Auger Regularly: Check the rubber auger paddles for wear and damage. Replace worn or damaged paddles to maintain optimal snow throwing performance.
- Shear Pin Replacement: Keep spare shear pins on hand and replace them immediately if the auger stops abruptly, indicating a potential obstruction. Use only manufacturer-approved shear pins.
- Fuel Stabilization: Add fuel stabilizer to the gas tank before storing the snow thrower for the off-season to prevent fuel degradation and carburetor issues.
History & Background
The Ariens Gravely 938011 SS522 was introduced as an entry-level snow thrower in the Ariens Gravely lineup. As a single-stage model, it provided a cost-effective and lightweight solution for homeowners. While not a revolutionary design, it offered a reliable and easy-to-use option for clearing snow from smaller areas, contributing to the popularity of single-stage snow throwers.
Frequently Asked Questions
What engine is in the Ariens Gravely 938011 SS522?
The Ariens Gravely 938011 SS522 likely uses a Tecumseh or Briggs & Stratton gas engine, estimated to be in the 5-6 HP range. It is unlikely to have an electric start option.
What is the clearing width of the 938011 SS522?
The clearing width of the Ariens Gravely 938011 SS522 is 22 inches. The intake height is estimated to be between 6 and 8 inches.
Is the 938011 SS522 a single-stage or two-stage snow blower?
The 938011 SS522 is a single-stage snow thrower. It uses a rubber-edged auger that directly contacts the ground to scoop up and throw snow through the discharge chute.
What are common parts needed for the 938011 SS522?
Common wear parts for the 938011 SS522 include shear pins, auger paddles, the scraper bar, spark plugs, and fuel filters.
