Ariens Gravely 938006-SS322 Snow Blower Thrower Parts
The Ariens Gravely 938006 SS322 snow thrower, likely manufactured in the late 1990s or early 2000s, is a gas-powered, single-stage unit known for its compact size and ease of use. With a 22-inch clearing width, it's a popular choice for homeowners with smaller driveways and walkways. Its simple design made it a reliable and affordable option for light to moderate snow removal.
The Ariens Gravely 938006 SS322 is a single-stage snow thrower designed for residential use. Production years are estimated to be from the late 1990s to early 2000s, though precise dates can vary depending on the specific manufacturing run. The engine is likely a Tecumseh or Briggs & Stratton gas engine, producing around 5 HP. An electric start option may or may not be available depending on the specific model. As a single-stage snow thrower, it utilizes a rubber-edged auger to both collect snow and propel it through the discharge chute. The clearing width is 22 inches, and the intake height is approximately 12 inches. The throwing distance is generally up to 30 feet, depending on snow conditions. The drive system is wheel-driven, with typically one or two forward speeds. The chute control is manual, allowing users to adjust the direction of the discharged snow. While this model may not have a headlight or heated grips, its lightweight design and maneuverability make it ideal for clearing decks, patios, and small driveways with light to moderate snowfall. It is best suited for paved surfaces to prevent damage to the rubber auger paddles.
Specifications
| Engine | Tecumseh or Briggs & Stratton 5 HP (Estimated) Electric Start (Optional) |
|---|---|
| Stage Type | Single-Stage |
| Clearing Width | 22 inches |
| Intake Height | 12 inches |
| Throwing Distance | Up to 30 ft |
| Drive System | Wheel - 1-2 Forward |
| Fuel Tank | 0.75 Gallons (Estimated) |
| Weight | 80 Lbs (Estimated) |
| Years Produced | Late 1990s - Early 2000s (Estimated) |
Maintenance Tips
- Inspect the Auger Paddles: Regularly check the rubber auger paddles for wear and tear, replacing them as needed to maintain optimal snow throwing performance.
- Replace Shear Pins: Ensure you have extra shear pins on hand and replace them immediately if they break, preventing damage to the auger and engine.
- Use Fuel Stabilizer: Add fuel stabilizer to the gas tank before storing the snow blower for the off-season to prevent fuel degradation and carburetor issues.
History & Background
The Ariens Gravely 938006 SS322 was introduced as an entry-level, single-stage snow thrower within the Ariens/Gravely lineup. It offered a compact and affordable solution for homeowners needing to clear smaller areas. While not a groundbreaking model, its reliability and ease of use contributed to its popularity among homeowners with limited storage space or lighter snow removal needs.
Frequently Asked Questions
What engine is in the Ariens Gravely 938006 SS322?
The Ariens Gravely 938006 SS322 is typically powered by a Tecumseh or Briggs & Stratton gas engine, producing around 5 HP. Some models may have been equipped with an electric start option.
What is the clearing width of the 938006 SS322?
The Ariens Gravely 938006 SS322 has a clearing width of 22 inches and an intake height of approximately 12 inches.
Is the 938006 SS322 a single-stage or two-stage snow blower?
The Ariens Gravely 938006 SS322 is a single-stage snow thrower. It utilizes a rubber-edged auger that both collects and throws the snow out of the discharge chute.
What are common parts needed for the 938006 SS322?
Common replacement parts for the Ariens Gravely 938006 SS322 include shear pins, auger paddles, drive belts, scraper bar, spark plugs, and fuel filters. Regular maintenance and replacement of these parts will ensure optimal performance and longevity.
