Ariens Gravely 932501-ST724 Snow Blower Thrower Parts
The Ariens Gravely 932501 ST724 is a robust two-stage snow blower, primarily manufactured in the late 1990s and early 2000s. Powered by a reliable gas engine and boasting a 24-inch clearing width, the ST724 was a popular choice for homeowners seeking powerful snow removal capabilities. Its durable construction and effective snow throwing made it a sought-after model for tackling moderate to heavy snowfall.
The Ariens Gravely 932501 ST724 snow blower is a classic example of a durable and effective snow removal machine. Production years primarily spanned the late 1990s and early 2000s. This model typically features a Tecumseh engine, ranging from 7 to 8 horsepower, and most models offered an optional electric start for added convenience. Being a two-stage snow blower, the ST724 utilizes a robust auger system to break up the snow and an impeller to throw it a considerable distance. The clearing width is a practical 24 inches, with an intake height sufficient for handling moderate snow depths. Expect a throwing distance of up to 30-35 feet, depending on snow conditions. The drive system is typically wheel-driven with multiple forward and reverse speeds, offering good maneuverability. Chute controls are usually manual, allowing users to direct the snow discharge. While some models may lack features like headlights or heated grips, the ST724 is appreciated for its reliability and power in handling varied snow conditions. It's ideally suited for homeowners and smaller commercial properties experiencing regular snowfall, including packed snow.
Specifications
| Engine | Tecumseh 7-8 HP, Electric Start Optional |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 24 inches |
| Intake Height | 20 inches |
| Throwing Distance | Up to 35 ft |
| Drive System | Wheel - 5 Forward/2 Reverse |
| Fuel Tank | 1.5 gallons |
| Weight | Approximately 200 lbs |
| Years Produced | Late 1990s - Early 2000s |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for any signs of damage or wear. Replace any damaged parts to maintain optimal performance.
- Check and Replace Shear Pins: Inspect shear pins regularly and replace them immediately if broken. Using the correct shear pins is crucial to protecting the auger gearbox.
- Maintain Belt Tension: Ensure proper belt tension for the auger and drive system. Loose belts can cause slippage and reduce throwing distance and drive power. Adjust or replace belts as needed.
- Use Fuel Stabilizer: Add fuel stabilizer to the gasoline, especially before storing the snow blower for the off-season, to prevent fuel degradation and carburetor issues.
History & Background
The Ariens Gravely 932501 ST724 was introduced as a reliable mid-range snow blower in the late 1990s, filling a need for homeowners who required more power than a single-stage but didn't need the bulk of a larger commercial unit. While there weren't major redesigns during its production run, the ST724 became a staple in the Ariens/Gravely lineup due to its robust construction and dependable performance.
Frequently Asked Questions
What engine is in the Ariens Gravely 932501 ST724?
The Ariens Gravely 932501 ST724 typically features a Tecumseh engine ranging from 7 to 8 horsepower. Some models were equipped with an electric start option.
What is the clearing width of the 932501 ST724?
The Ariens Gravely 932501 ST724 has a clearing width of 24 inches and an intake height of approximately 20 inches.
Is the 932501 ST724 a single-stage or two-stage snow blower?
The Ariens Gravely 932501 ST724 is a two-stage snow blower. It uses an auger to collect and break up the snow, and then an impeller to throw the snow out of the discharge chute.
What are common parts needed for the 932501 ST724?
Common wear parts for the Ariens Gravely 932501 ST724 include shear pins, belts (auger and drive), auger paddles, scraper bar, skid shoes, spark plugs, and fuel filters.
