Ariens Gravely 932141-ST7524 Snow Blower Thrower Parts
The Ariens Gravely 932141 ST7524 snow blower, manufactured likely in the late 1990s or early 2000s, is a gas-powered, two-stage model known for its reliability and ability to handle moderate to heavy snowfall. Featuring a 24-inch clearing width, this snow thrower provides a balance of power and maneuverability, making it popular among homeowners and property managers needing efficient snow removal.
The Ariens Gravely 932141 ST7524 is a two-stage snow blower designed for both residential and light commercial use. While the precise production years are difficult to pinpoint, it was likely produced from the late 1990s into the early 2000s. This model is typically powered by a Tecumseh engine. While the exact horsepower may vary slightly, it's usually in the 7-8 HP range. Some models may feature an optional electric start for easier starting in cold conditions. As a two-stage snow blower, the 932141 ST7524 utilizes a robust auger system to break up the snow and then an impeller to throw it a considerable distance. Expect a throwing distance of up to 30-35 feet, depending on snow conditions. The clearing width is 24 inches, with an intake height around 20-21 inches. It uses a wheel drive system, providing multiple forward and reverse speeds, allowing for easy navigation in varying snow depths. Most models feature a manual chute control, enabling the operator to adjust the direction of the snow stream. Typically, it does not come with a headlight or heated grips. This snow blower excels in handling moderate to heavy snowfalls on driveways, sidewalks, and other paved surfaces. Its two-stage design allows it to effectively clear packed snow and icy patches, making it a versatile choice for homeowners in snowy climates.
Specifications
| Engine | Tecumseh 7-8 HP (approx.) Electric Start (Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 24 inches |
| Intake Height | 20-21 inches |
| Throwing Distance | Up to 35 ft |
| Drive System | Wheel - Multiple Forward/Reverse Speeds |
| Fuel Tank | 1.5 gallons (approximate) |
| Weight | 200 lbs (approximate) |
| Years Produced | Late 1990s - Early 2000s (Approximate) |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for signs of wear, damage, or bending. Replace worn or damaged parts to maintain optimal performance.
- Shear Pin Replacement: Always have spare shear pins on hand. Replace broken shear pins immediately to prevent damage to the auger gearbox.
- Fuel Stabilizer: Add fuel stabilizer to the gasoline before storing the snow blower for the off-season. This prevents fuel degradation and carburetor issues.
- Skid Shoe Adjustment: Adjust the skid shoes according to the surface you're clearing (pavement, gravel, etc.) to prevent damage to the snow blower and the surface.
History & Background
The Ariens Gravely 932141 ST7524 snow blower was a popular model introduced to provide a reliable and efficient snow removal solution for homeowners. While not a groundbreaking redesign, it offered a solid combination of power and maneuverability. It established itself as a dependable option in the two-stage snow blower market, representing Ariens Gravely's commitment to durable and effective snow removal equipment.
Frequently Asked Questions
What engine is in the Ariens Gravely 932141 ST7524?
The Ariens Gravely 932141 ST7524 is typically powered by a Tecumseh engine, with horsepower ranging approximately from 7 to 8 HP. Electric start was an available option on some models.
What is the clearing width of the 932141 ST7524?
The Ariens Gravely 932141 ST7524 has a clearing width of 24 inches and an intake height of approximately 20-21 inches.
Is the 932141 ST7524 a single-stage or two-stage snow blower?
The Ariens Gravely 932141 ST7524 is a two-stage snow blower. It uses an auger to collect and break up the snow, and then an impeller to throw the snow out of the chute.
What are common parts needed for the 932141 ST7524?
Common wear parts for the Ariens Gravely 932141 ST7524 include shear pins, belts (auger and drive), scraper bar, skid shoes, spark plugs, and fuel filters.
