Skip to main content
(828) 649-7190
Same Day Shipping Before 2pm EST

Ariens Gravely 932035-ST724 Snow Blower Thrower Parts

Replacement parts for the Ariens Gravely 932035-ST724 Snow Blower Thrower. Browse our selection of OEM and aftermarket parts — filters, belts, hydraulics, electrical, and more.

The Ariens Gravely 932035 ST724 is a robust two-stage gas-powered snow blower popular for both residential and light commercial use. This model, primarily manufactured in the early 2000s, boasts a 24-inch clearing width, making it efficient for clearing driveways and walkways. Known for its durability and reliable performance, the ST724 remains a favorite among homeowners and snow removal professionals alike.

About the 932035 ST724

The Ariens Gravely 932035 ST724 snow blower, produced in the early 2000s, was designed for tackling moderate to heavy snowfall. It's powered by a Tecumseh Snow King engine, typically ranging from 7 to 8 horsepower (check the specific engine model on your unit for precise specifications). An electric start option was available on some models, providing convenient starting in cold weather. As a two-stage snow blower, the ST724 utilizes a serrated auger system to break up snow, followed by an impeller that throws the snow through the discharge chute. The clearing width is 24 inches, with an intake height of approximately 20 inches, allowing it to handle deeper snowfalls. Under ideal conditions, throwing distances can reach up to 30-35 feet. The drive system is wheel-driven, offering multiple forward and reverse speeds to adapt to varying snow conditions. Chute controls are typically manual, allowing users to direct the snow stream. A headlight is often included for improved visibility during nighttime or early morning snow removal. While heated grips were not standard on this model, its robust construction and powerful engine made it suitable for a wide range of snow conditions, ideal for homeowners, property managers, and light commercial snow removal.

932035 ST724 Specifications

EngineTecumseh Snow King 7-8 HP (Varies by specific engine model) Electric Start (Optional)
Stage TypeTwo-Stage
Clearing Width24 inches
Intake Height20 inches
Throwing DistanceUp to 35 ft
Drive SystemWheel - Multiple Forward/Reverse
Fuel TankApprox. 1.5 gallons
WeightApprox. 200 lbs
Years ProducedEarly 2000s

932035 ST724 Maintenance Tips

  • Inspect the Auger and Impeller: Regularly check the auger blades and impeller for any signs of wear, damage, or bending. Replace damaged parts immediately to maintain optimal performance.
  • Replace Shear Pins: Always keep spare shear pins on hand. Replace them immediately if the auger stops abruptly, indicating a shear pin failure. Using the correct shear pins is crucial to protect the snow blower's gearbox.
  • Check Belt Tension: Inspect the belts (auger and drive) for proper tension and wear. Loose or worn belts can significantly reduce the snow blower's performance. Replace belts as needed.
  • Use Fuel Stabilizer: Add fuel stabilizer to the gasoline before storing the snow blower for the off-season. This prevents fuel degradation and ensures easy starting next season.

932035 ST724 History & Background

The Ariens Gravely ST724 model, part of the 932035 series, was introduced in the early 2000s as a reliable mid-sized snow blower. It was designed to provide a balance of power and maneuverability for residential use. While there weren't major redesigns during its production run, subtle improvements were made to engine components and chute control mechanisms, enhancing its overall performance and user experience.

Frequently Asked Questions

Which auger belt is recommended for the Ariens Gravely 932035 ST724?

The recommended auger belt for the Ariens Gravely 932035 ST724 model is the 07232500 - Belt, Auger. This belt ensures efficient transfer of power to the auger system, which is crucial for effective snow removal.

Which traction belt fits the Ariens Gravely 932035 ST724?

For the Ariens Gravely 932035 ST724, the appropriate traction belt is the 07210700 - Belt, Traction. This part is crucial for maintaining proper drive and mobility, allowing the snow blower to move effectively across various terrains.

Which 1/2" x 39" V-belt is recommended for the Ariens Gravely 932035 ST724?

For the Ariens Gravely 932035 ST724, the A37K - Aramid Blue V-Belt (1/2" X 39" ) is a recommended replacement. This robust belt is designed for demanding snow blower applications, offering durability and reliable performance.

What are the essential replacement belts for the Ariens Gravely 932035 ST724?

Essential replacement belts for the Ariens Gravely 932035 ST724 include the 07232500 - Belt, Auger, the 07210700 - Belt, Traction, and various V-belts such as the A37K - Aramid Blue V-Belt (1/2" X 39" ) and the 3L340K - Aramid Blue V-Belt (3/8" X 34" ). Regularly checking and replacing these belts helps maintain optimal performance and extend the life of your snow blower.

Showing 1-4 of 4 products