Ariens Gravely 932033-ST724 Snow Blower Thrower Parts
The Ariens Gravely 932033 ST724, manufactured in the late 1990s and early 2000s, is a gas-powered, two-stage snow blower known for its robust performance and reliability. With a 24-inch clearing width, it was a popular choice for homeowners and small businesses needing to tackle moderate to heavy snowfall. Its durable construction and ease of use contributed to its enduring reputation.
The Ariens Gravely 932033 ST724 snow blower was a popular model produced in the late 1990s and early 2000s, offering a balance of power and maneuverability. It is powered by a Tecumseh Snow King engine, typically around 7 HP, and some models featured an optional electric start for convenient cold-weather starting. This is a two-stage snow blower, meaning it uses an auger to collect snow and then an impeller to throw it away from the machine. The auger system is designed to break up snow and ice efficiently. The 932033 boasts a 24-inch clearing width and an intake height of approximately 20 inches, allowing it to handle significant snowfall. It can throw snow up to 30-35 feet, depending on the snow conditions. The drive system is wheel-driven with multiple forward and reverse speeds, giving the operator control in varying conditions. The chute controls are typically manual, allowing users to adjust the direction and angle of the snow stream. Many models included a headlight for improved visibility in low-light conditions. While not equipped with heated grips, its reliable performance made it suitable for residential and light commercial use in areas with moderate to heavy snowfall.
Specifications
| Engine | Tecumseh Snow King 7 HP Electric Start (Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 24 inches |
| Intake Height | 20 inches |
| Throwing Distance | Up to 35 ft |
| Drive System | Wheel - 5 Forward/2 Reverse |
| Fuel Tank | Unknown Gallons |
| Weight | Approximately 200 Lbs |
| Years Produced | Late 1990s - Early 2000s |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for wear, damage, or bending. Replace worn or damaged parts promptly to maintain optimal performance.
- Shear Pin Replacement: Always keep spare shear pins on hand and replace them immediately if they break to prevent damage to the auger gearbox. Use only the correct shear pins specified for the 932033 model.
- Oil Changes and Fuel Stabilizer: Perform regular oil changes according to the manufacturer's recommendations. Add fuel stabilizer to the gasoline, especially before storing the snow blower for the off-season, to prevent fuel degradation and carburetor issues.
- Skid Shoe Adjustment: Adjust the skid shoes to suit the surface you are clearing. Raise them for gravel or uneven surfaces and lower them for paved driveways to prevent damage and ensure smooth operation.
History & Background
The Ariens Gravely 932033 ST724 was introduced as a mid-range snow blower offering a good balance of power and affordability. It did not undergo any major redesigns during its production run, maintaining a consistent design focused on reliability. It became a popular model due to its durable construction and effective snow-clearing capabilities.
Frequently Asked Questions
What engine is in the Ariens Gravely 932033 ST724?
The Ariens Gravely 932033 ST724 is typically equipped with a Tecumseh Snow King engine, rated around 7 HP. Some models came with an optional electric start feature.
What is the clearing width of the 932033 ST724?
The Ariens Gravely 932033 ST724 has a clearing width of 24 inches and an intake height of approximately 20 inches, allowing it to handle significant snowfalls.
Is the 932033 ST724 a single-stage or two-stage snow blower?
The Ariens Gravely 932033 ST724 is a two-stage snow blower. It uses an auger to gather and break up the snow and then an impeller to throw the snow through the chute.
What are common parts needed for the 932033 ST724?
Commonly needed parts for the Ariens Gravely 932033 ST724 include shear pins, drive belts, auger belts, scraper bar, skid shoes, spark plugs, and fuel filters. Regular inspection and replacement of these wear parts will help ensure the snow blower operates reliably.
