Ariens Gravely 926502-001501-SB936 Snow Blower Thrower Parts
The Ariens Gravely 926502-001501 SB936 is a robust gas-powered snow thrower designed for both residential and light commercial use. Featuring a 36-inch clearing width and a two-stage design, this model was known for its powerful performance and reliability in tackling heavy snowfalls during its production run. It quickly became a favorite for homeowners and professionals seeking a durable and effective snow removal solution.
The Ariens Gravely 926502-001501 SB936 snow blower, also known as the SB936, was a popular model for several years, providing dependable snow removal capabilities. While specific production years may vary, it was known for its powerful performance. It typically features a Tecumseh engine, commonly in the 11-13 HP range, and often included an electric start option for easier cold-weather starts. The SB936 utilizes a two-stage auger system, effectively breaking up snow and ice before throwing it through the discharge chute. Its 36-inch clearing width allows for efficient snow removal across larger areas, while the intake height accommodates deeper drifts. Throwing distance can reach up to 40 feet, depending on snow conditions. The drive system is typically wheel-driven, offering multiple forward and reverse speeds for enhanced maneuverability. Chute controls are usually manual, allowing users to adjust the direction and angle of the snow stream. Many models also included a headlight for improved visibility during nighttime or early morning snow removal. While heated grips were not always standard, they were sometimes available as an optional upgrade, and many owners have installed them aftermarket. The Ariens Gravely 926502-001501 SB936 is well-suited for handling moderate to heavy snowfalls on driveways, walkways, and parking lots, making it a reliable choice for both homeowners and snow removal professionals.
Specifications
| Engine | Tecumseh 11-13 HP (Electric Start Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 36 inches |
| Intake Height | 20-23 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - 6 Forward/2 Reverse |
| Fuel Tank | 5 Gallons |
| Weight | 250-300 Lbs |
| Years Produced | Likely late 1990s - early 2000s |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for wear or damage. Replace any worn or damaged parts to maintain optimal performance.
- Check and Replace Shear Pins: Shear pins protect the auger gearbox from damage. Inspect them frequently and replace them immediately if they are broken or damaged.
- Use Fuel Stabilizer: Add fuel stabilizer to the gasoline before storing the snow blower for the off-season. This will prevent fuel degradation and ensure easier starting next winter.
- Adjust Skid Shoes: Adjust the skid shoes according to the surface you are clearing. Raise them for gravel driveways and lower them for paved surfaces to prevent damage.
History & Background
The Ariens Gravely SB936 was introduced as a mid-range snow blower offering a balance of power and maneuverability. It was designed to bridge the gap between smaller residential models and larger commercial units. Its popularity stemmed from its reliable engine and efficient two-stage design, making it a staple in snow removal equipment lineups for several years.
Frequently Asked Questions
What engine is in the Ariens Gravely 926502-001501 SB936?
The Ariens Gravely 926502-001501 SB936 typically features a Tecumseh engine, ranging from 11 to 13 horsepower. Some models were equipped with an electric start option for easier starting in cold weather.
What is the clearing width of the 926502-001501 SB936?
The Ariens Gravely 926502-001501 SB936 has a clearing width of 36 inches, allowing it to clear a wide path with each pass. The intake height is approximately 20-23 inches.
Is the 926502-001501 SB936 a single-stage or two-stage snow blower?
The Ariens Gravely 926502-001501 SB936 is a two-stage snow blower. It uses an auger to break up and gather the snow, then an impeller to throw the snow through the discharge chute.
What are common parts needed for the 926502-001501 SB936?
Commonly needed parts for the Ariens Gravely 926502-001501 SB936 include shear pins, belts (auger and drive), auger paddles/blades, scraper bar, skid shoes, spark plugs, and fuel filters. Regular replacement of these parts helps maintain optimal performance and extend the life of the snow blower.
