Ariens Gravely 926318-PRO26 Snow Blower Thrower Parts
The Ariens Gravely 926318 PRO26 is a robust, gas-powered two-stage snow blower designed for both residential and commercial use. With a 26-inch clearing width, this model, likely manufactured in the late 1990s and early 2000s, offered powerful snow-clearing capabilities. Its durable construction and efficient design made it a popular choice for those needing reliable performance in heavy snow conditions.
The Ariens Gravely 926318 PRO26 snow blower was a workhorse in the Ariens/Gravely lineup, built to tackle demanding snow removal tasks. While specific production years can vary, this model was likely produced from the late 1990s into the early 2000s. It typically features a Tecumseh engine, likely ranging from 8-10 HP, with an optional electric start for easier starting in cold weather. As a two-stage snow blower, the 926318 PRO26 utilizes a serrated auger to break up snow and ice, feeding it into a high-speed impeller that discharges it through the chute. It has a 26-inch clearing width and an intake height of approximately 20-21 inches, allowing it to handle significant snowfalls. The throwing distance can reach up to 30-40 feet, depending on snow conditions. It features a wheel drive system with multiple forward and reverse speeds, providing good traction and control. Chute controls are typically manual, allowing the operator to adjust the direction of the snow stream. While not all models included a headlight or heated grips, these were sometimes available as options or standard features on higher-end trims. The 926318 PRO26 is ideally suited for areas with moderate to heavy snowfall, including long driveways, sidewalks, and parking lots. Its power and durability make it a solid choice for both homeowners and commercial users.
Specifications
| Engine | Tecumseh 8-10 HP, Electric Start (Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 26 inches |
| Intake Height | 21 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - Multiple Forward/Reverse Speeds |
| Fuel Tank | Typically 1.5-2 Gallons |
| Weight | Around 200 lbs |
| Years Produced | Late 1990s - Early 2000s (Estimated) |
Maintenance Tips
- Inspect the Auger and Impeller: Regularly check for wear, damage, or obstructions. Replace worn auger paddles and ensure the impeller spins freely.
- Check and Replace Shear Pins: Shear pins are designed to break if the auger encounters a hard object. Always keep spare shear pins on hand and replace them promptly when broken.
- Change the Oil Annually: Regular oil changes ensure the engine runs smoothly and extends its lifespan. Refer to the owner's manual for the correct oil type and change intervals.
- Use Fuel Stabilizer: Add fuel stabilizer to the gas tank before storing the snow blower for the off-season. This prevents fuel from degrading and clogging the carburetor.
History & Background
The Ariens Gravely 926318 PRO26 was introduced as a mid-sized, robust two-stage snow blower aimed at both residential and commercial users. While not a revolutionary design, it built upon Ariens' reputation for durable and reliable snow removal equipment. It was a popular model during its production run, known for its powerful engine and effective snow-clearing ability.
Frequently Asked Questions
What engine is in the Ariens Gravely 926318 PRO26?
The Ariens Gravely 926318 PRO26 typically uses a Tecumseh engine, ranging from 8 to 10 HP. Some models may have included an optional electric start for easier starting in cold weather.
What is the clearing width of the 926318 PRO26?
The Ariens Gravely 926318 PRO26 has a clearing width of 26 inches and an intake height of approximately 21 inches.
Is the 926318 PRO26 a single-stage or two-stage snow blower?
The Ariens Gravely 926318 PRO26 is a two-stage snow blower. It uses an auger to gather and break up the snow, then feeds it to an impeller that throws the snow through the discharge chute.
What are common parts needed for the 926318 PRO26?
Common parts needed for the Ariens Gravely 926318 PRO26 include shear pins, belts (auger belt and drive belt), auger paddles, scraper bar, skid shoes, spark plugs, and fuel filters.
