Ariens Gravely 926311-ST11528DLE Snow Blower Thrower Parts
The Ariens Gravely 926311 ST11528DLE snow blower, often sought after for its robust build and powerful performance, was manufactured in the late 1990s and early 2000s. Powered by a gasoline engine and featuring a two-stage design, this model boasts a wide 28-inch clearing width, making it a popular choice for both homeowners and commercial users dealing with substantial snowfall. Its dependable performance made it a trusted solution for challenging winter conditions.
The Ariens Gravely 926311 ST11528DLE snow blower, a member of Ariens' Gravely line, was produced from approximately 1999 to 2004. This model features a Tecumseh Snow King 11 HP engine (342cc), offering ample power to tackle heavy, wet snow. Many units also included an electric start option for easier starting in cold temperatures. As a two-stage snow blower, it utilizes an auger system to break up the snow and an impeller to throw it a considerable distance. The 28-inch clearing width and approximately 20-inch intake height allow it to clear large areas quickly and efficiently. Throwing distances could reach up to 40 feet, depending on snow conditions. The drive system is wheel-driven, typically offering six forward speeds and two reverse speeds. Chute control is manual, allowing the operator to direct the snow discharge. This model usually includes a headlight for improved visibility during early morning or evening snow removal. While heated grips were not a standard feature on this model, its robust construction and powerful engine made it ideal for handling moderate to heavy snowfall on driveways, walkways, and smaller commercial properties. Its two-stage design excels in conditions where single-stage models struggle.
Specifications
| Engine | Tecumseh Snow King 11 HP (342cc) Electric Start (Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 28 inches |
| Intake Height | 20 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - 6 Forward / 2 Reverse |
| Fuel Tank | 5 Quarts gallons |
| Weight | 250 lbs |
| Years Produced | 1999-2004 |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for signs of wear, damage, or bending. Replace any damaged components promptly.
- Replace Shear Pins: Keep a supply of shear pins on hand. Replace them immediately if they break to prevent damage to the auger gearbox.
- Oil Changes and Fuel Stabilizer: Change the engine oil annually according to the manufacturer's recommendations. Add fuel stabilizer to the gasoline before storing the snow blower for the off-season to prevent fuel degradation.
- Adjust Skid Shoes: Adjust the skid shoes to prevent damage to the scraper blade and to optimize snow removal performance based on the surface type (e.g., gravel vs. paved driveway).
History & Background
The Ariens Gravely 926311 ST11528DLE was introduced in the late 1990s as part of Ariens' Gravely line of snow removal equipment. It aimed to provide a robust and powerful option for users needing to clear larger areas or deal with heavier snowfall. While no major redesigns occurred during its production run, it remains a sought-after model for its dependability and effectiveness.
Frequently Asked Questions
What engine is in the Ariens Gravely 926311 ST11528DLE?
The Ariens Gravely 926311 ST11528DLE is equipped with a Tecumseh Snow King engine, typically rated at 11 HP (342cc). Some models were available with an optional electric start feature.
What is the clearing width of the 926311 ST11528DLE?
The 926311 ST11528DLE has a clearing width of 28 inches and an intake height of approximately 20 inches.
Is the 926311 ST11528DLE a single-stage or two-stage snow blower?
The 926311 ST11528DLE is a two-stage snow blower. It uses an auger to gather and break up the snow, and then an impeller to throw the snow out through the discharge chute.
What are common parts needed for the 926311 ST11528DLE?
Common wear parts for the 926311 ST11528DLE include shear pins, drive belts, auger belts, scraper bar, skid shoes, spark plugs, and fuel filters. Also, replacement auger paddles might be necessary after extended use.
