Ariens Gravely 926105-000101-PRO36 Snow Blower Thrower Parts
The Ariens Gravely 926105-000101 PRO36 is a robust gas-powered, two-stage snow blower known for its commercial-grade performance. Featuring a 36-inch clearing width, this model was a popular choice for both residential and professional users needing to tackle significant snowfall. While production years varied, the PRO36 gained a reputation for its power and durability.
The Ariens Gravely 926105-000101 PRO36 snow blower was designed to handle heavy snow removal tasks. Specific production years for this exact model number should be verified with Ariens or Gravely directly. It typically featured a powerful engine, often a Briggs & Stratton or similar brand, ranging from 11.5 to 13 HP. An electric start option was commonly available for easy starting in cold conditions. Being a two-stage snow blower, it utilized a robust auger system to break up snow and an impeller to throw it a considerable distance, often up to 50 feet or more. The 36-inch clearing width and approximately 20-21 inch intake height allowed it to efficiently clear wide swaths of snow. The drive system typically featured multiple forward and reverse speeds, controlled by wheels or tracks providing enhanced traction. Chute rotation might be manual or power-assisted, depending on the specific trim level. A headlight was usually included for enhanced visibility in low-light conditions. While heated grips weren't always standard, some models might have offered them. The PRO36 was ideally suited for large driveways, commercial properties, and areas with heavy snowfall where a powerful and reliable machine was essential.
Specifications
| Engine | Briggs & Stratton or similar 11.5-13 HP Electric Start Optional |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 36 inches |
| Intake Height | 20-21 inches |
| Throwing Distance | Up to 50 ft |
| Drive System | Wheel or Track - Multiple Forward/Reverse Speeds |
| Fuel Tank | 5 gallons |
| Weight | 300-350 lbs |
| Years Produced | Verify Specific Years with Ariens/Gravely |
Maintenance Tips
- Inspect the auger and impeller regularly for any signs of damage or wear. Replace worn parts promptly to maintain optimal performance.
- Always use the correct shear pins and keep spares on hand. Shear pins are designed to break under stress, protecting the auger gearbox from damage.
- Check belt tension periodically. Loose belts can slip, reducing throwing distance. Adjust or replace belts as needed.
- Change the engine oil at recommended intervals. Regular oil changes are crucial for maintaining engine health and prolonging its life. Use fuel stabilizer during off-season storage to prevent fuel degradation. Adjust skid shoes appropriately to ensure proper ground clearance and prevent damage to the scraper bar.
History & Background
The Ariens Gravely PRO36 snow blower represents a line of heavy-duty machines aimed at both homeowner and professional markets. Introduced to address the need for higher clearing capacity and improved snow throwing performance, this model was often praised for its robust construction and powerful engine. While there might have been minor revisions over its production run, the core design remained focused on durability and performance.
Frequently Asked Questions
What engine is in the Ariens Gravely 926105-000101 PRO36?
The Ariens Gravely 926105-000101 PRO36 is typically equipped with a Briggs & Stratton or a similar brand engine, ranging from 11.5 to 13 HP. Electric start was often available as an option.
What is the clearing width of the 926105-000101 PRO36?
The Ariens Gravely 926105-000101 PRO36 has a clearing width of 36 inches and an intake height of approximately 20-21 inches.
Is the 926105-000101 PRO36 a single-stage or two-stage snow blower?
The Ariens Gravely 926105-000101 PRO36 is a two-stage snow blower. It uses an auger to break up the snow and then an impeller to throw it out of the discharge chute.
What are common parts needed for the 926105-000101 PRO36?
Common parts needed for the 926105-000101 PRO36 include shear pins, belts (auger and drive), auger paddles, scraper bar, skid shoes, spark plugs, and fuel filters. These are wear items and should be inspected and replaced regularly to maintain optimal performance.
