Ariens Gravely 926103-000101-1332LE Snow Blower Thrower Parts
The Ariens Gravely 926103-000101 1332LE is a robust gas-powered snow blower designed for tackling heavy snowfalls. Featuring a 32-inch clearing width and a powerful two-stage system, this model was popular with both homeowners and commercial users for its reliability and ability to clear large areas quickly. Its durability made it a sought-after choice for demanding snow removal tasks.
The Ariens Gravely 926103-000101 1332LE snow blower is a two-stage model built for residential and commercial snow removal. While exact years of production can vary, this model was popular for a significant period. It typically features a Tecumseh engine, with horsepower ranging around 13 HP and a displacement around 358cc, offering ample power for demanding snow conditions. Electric start was commonly available as an option for easier starting in cold weather. As a two-stage snow blower, the 1332LE uses an auger to break up and gather snow, then an impeller to forcefully discharge it through the chute. The 32-inch clearing width allows for efficient snow removal on wide paths and driveways, with an intake height designed to handle deeper snow. Throwing distances can reach up to 40-50 feet depending on snow consistency and conditions. The drive system is wheel-driven, with multiple forward and reverse speeds for enhanced maneuverability. Chute controls are typically manual, allowing the operator to adjust the direction and angle of the snow stream. A headlight is usually included for increased visibility during early morning or evening snow removal. While not always standard, heated grips could be a feature on some models. This snow blower is ideally suited for areas with moderate to heavy snowfall and is capable of handling packed snow and icy conditions.
Specifications
| Engine | Tecumseh 13 HP 358cc Electric Start (Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 32 inches |
| Intake Height | 20 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - 6 Forward/2 Reverse |
| Fuel Tank | 5 gallons |
| Weight | 275 lbs |
| Years Produced | (Exact years vary) |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for wear, damage, or obstructions. Replace worn or damaged parts to maintain optimal performance.
- Check and Replace Shear Pins: Ensure shear pins are in good condition and replace them immediately if broken. Keep extra shear pins on hand as they are designed to protect the auger gearbox.
- Use Fuel Stabilizer: Add fuel stabilizer to the gas tank before storing the snow blower for the off-season to prevent fuel degradation and carburetor issues. Drain fuel entirely or run the engine dry for storage.
- Adjust Skid Shoes: Periodically adjust the skid shoes to ensure proper clearance between the scraper blade and the ground, preventing damage to the scraper blade and your driveway surface.
History & Background
The Ariens Gravely 926103-000101 1332LE represents a popular model in the Ariens/Gravely lineup of snow blowers. It was designed as a powerful and reliable machine for both residential and commercial use. Its wide clearing width and robust engine contributed to its success in the snow removal market.
Frequently Asked Questions
What engine is in the Ariens Gravely 926103-000101 1332LE?
The Ariens Gravely 926103-000101 1332LE typically features a Tecumseh engine, around 13 HP and 358cc. Electric start was often an available option.
What is the clearing width of the 926103-000101 1332LE?
The Ariens Gravely 926103-000101 1332LE has a clearing width of 32 inches and an intake height of approximately 20 inches.
Is the 926103-000101 1332LE a single-stage or two-stage snow blower?
The Ariens Gravely 926103-000101 1332LE is a two-stage snow blower. It uses an auger to gather and break up the snow, and then an impeller to forcefully throw the snow through the discharge chute.
What are common parts needed for the 926103-000101 1332LE?
Common parts needed for the Ariens Gravely 926103-000101 1332LE include shear pins, belts (auger and drive), auger paddles/blades, scraper bar, skid shoes, spark plugs, and fuel filters.
