Ariens Gravely 924508-ST1128 Snow Blower Thrower Parts
The Ariens Gravely 924508 ST1128 is a robust gas-powered two-stage snow blower known for its reliability. Manufactured during the late 1990s and early 2000s, this model typically featured an 11 HP engine and a 28-inch clearing width. Its durable construction and effective snow removal capabilities made it a popular choice for both homeowners and commercial users facing moderate to heavy snowfall.
The Ariens Gravely 924508 ST1128 snow blower was a popular model produced primarily in the late 1990s and early 2000s. It was designed to handle substantial snowfalls and provide reliable performance. This model typically featured a Tecumseh 11 HP engine, offering ample power for clearing large areas. Electric start was a common, but not universal, feature on this model, providing added convenience in cold weather. As a two-stage snow blower, the 924508 ST1128 utilizes a robust auger system to break up snow and then an impeller to throw it away from the cleared area. The clearing width is 28 inches, and the intake height is approximately 21 inches, allowing it to handle deep drifts. Throwing distance could reach up to 40 feet depending on snow conditions. The drive system is wheel-driven, typically with 6 forward speeds and 2 reverse speeds, offering good maneuverability. Chute control is usually manual, requiring the operator to adjust the direction by hand. Many models featured a headlight for improved visibility during early morning or late evening snow removal. Heated grips were not a standard feature on this model. The 924508 ST1128 is ideally suited for areas with moderate to heavy snowfall, driveways, walkways, and small to medium-sized commercial properties.
Specifications
| Engine | Tecumseh 11 HP Electric Start (Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 28 inches |
| Intake Height | 21 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - 6 Forward/2 Reverse |
| Fuel Tank | 5 quarts gallons |
| Weight | Approximately 250 lbs |
| Years Produced | Late 1990s - Early 2000s |
Maintenance Tips
- Regularly inspect the auger and impeller for damage: Look for cracks, bends, or excessive wear, and replace worn or damaged parts promptly to maintain optimal performance.
- Replace shear pins as needed: Shear pins protect the auger gearbox from damage if the auger encounters a hard object. Keep spare shear pins on hand and replace them immediately when broken.
- Check and adjust belt tension: Proper belt tension is crucial for efficient power transfer. Refer to the owner's manual for the correct tension and adjust as necessary.
- Use fuel stabilizer during off-season storage: Add fuel stabilizer to the fuel tank before storing the snow blower to prevent fuel degradation and ensure easy starting next season.
History & Background
The Ariens Gravely 924508 ST1128 was introduced as a mid-range two-stage snow blower, building upon Ariens and Gravely's reputation for durable and reliable snow removal equipment. It offered a balance of power and maneuverability, making it a popular choice for a wide range of users. While there weren't major redesigns during its production run, minor improvements to components were likely implemented over the years.
Frequently Asked Questions
What engine is in the Ariens Gravely 924508 ST1128?
The Ariens Gravely 924508 ST1128 typically uses a Tecumseh engine with 11 horsepower. Some models may feature an electric start option for added convenience.
What is the clearing width of the 924508 ST1128?
The Ariens Gravely 924508 ST1128 has a clearing width of 28 inches and an intake height of approximately 21 inches.
Is the 924508 ST1128 a single-stage or two-stage snow blower?
The 924508 ST1128 is a two-stage snow blower. It uses an auger to collect and break up the snow, then an impeller to throw the snow out of the chute.
What are common parts needed for the 924508 ST1128?
Common parts needed for the 924508 ST1128 include shear pins, drive belts, auger belts, auger paddles (depending on model), scraper bar, skid shoes, spark plugs, and fuel filters.
