Ariens Gravely 924317-000101-ST924E Snow Blower Thrower Parts
The Ariens Gravely 924317-000101 ST924E is a popular two-stage gas-powered snow blower designed for residential and light commercial use. Featuring a 24-inch clearing width, this model was known for its reliable performance and ability to handle moderate to heavy snowfall. While the exact years of production may vary, these machines were a staple for several years, providing dependable snow removal.
The Ariens Gravely 924317-000101 ST924E is a robust two-stage snow blower that was a popular choice for homeowners and property managers seeking a reliable machine. The specific years of production for this exact model number are difficult to pinpoint without further documentation, but the general ST924E series was available for a significant period. These models typically featured a Tecumseh engine, often around 9 horsepower (HP) or equivalent CC rating, with an optional electric start for easier cold-weather starting. The two-stage design incorporates an auger to break up and collect the snow, then an impeller to forcefully throw it away from the cleared path. The 24-inch clearing width allowed for efficient snow removal on driveways and walkways, and the intake height was sufficient for handling moderate snowfalls. Expect a throwing distance of up to 30-40 feet, depending on snow conditions. The drive system is wheel-driven, with multiple forward and reverse speeds for maneuverability. Chute control is typically manual, allowing the operator to direct the snow discharge. A headlight is often included for improved visibility during early morning or evening snow removal. While heated grips were not a standard feature, the ST924E was ideally suited for handling moderate to heavy snowfall on paved surfaces.
Specifications
| Engine | Tecumseh 9 HP (estimated) Electric Start Optional |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 24 inches |
| Intake Height | 20 inches (estimated) |
| Throwing Distance | Up to 40 ft (estimated) |
| Drive System | Wheel - Multiple Forward/Reverse |
| Fuel Tank | 5 Quarts |
| Weight | 200 lbs (estimated) |
| Years Produced | Unknown (ST924E Series) |
Maintenance Tips
- Regularly inspect the auger and impeller for any signs of damage or wear. Replace worn or damaged parts immediately to ensure optimal performance.
- Check and replace shear pins as needed. These protect the auger gearbox from damage if the auger encounters a hard object. Keep spare shear pins on hand.
- Maintain proper belt tension to ensure efficient power transfer from the engine to the auger and drive system. Loose belts can slip and cause reduced performance.
- Change the engine oil according to the manufacturer's recommendations. Use the correct type and weight of oil for your engine. Add fuel stabilizer to the gas tank before storing the snowblower for the off-season to prevent fuel degradation.
- Adjust the skid shoes to the proper height to prevent damage to the scraper bar and to ensure optimal snow removal on different surfaces.
History & Background
The Ariens Gravely 924317-000101 ST924E snow blower was part of a popular series of two-stage machines known for their dependability. While specific introduction and redesign dates are not readily available, the ST924E models represented a mid-range option in the Ariens Gravely lineup, offering a balance of power and maneuverability that made them a favorite among homeowners.
Frequently Asked Questions
What engine is in the Ariens Gravely 924317-000101 ST924E?
The Ariens Gravely 924317-000101 ST924E typically used a Tecumseh engine, estimated around 9 horsepower. Some models may have had an electric start option for easier starting in cold weather.
What is the clearing width of the 924317-000101 ST924E?
The Ariens Gravely 924317-000101 ST924E has a clearing width of 24 inches and an approximate intake height of 20 inches.
Is the 924317-000101 ST924E a single-stage or two-stage snow blower?
The Ariens Gravely 924317-000101 ST924E is a two-stage snow blower. This means it uses an auger to gather and break up the snow, then an impeller to discharge the snow through the chute.
What are common parts needed for the 924317-000101 ST924E?
Common wear parts for the Ariens Gravely 924317-000101 ST924E include shear pins, belts (auger and drive), auger paddles (if equipped), scraper bar, skid shoes, spark plugs, and fuel filters.
