Ariens Gravely 924112-ST928-LE Snow Blower Thrower Parts
The Ariens Gravely 924112 ST928 LE snow blower, a popular and dependable model, was manufactured for several years and powered by a robust gas engine. Featuring a 28-inch clearing width and a two-stage design, this machine efficiently tackles moderate to heavy snowfall. Its combination of power and maneuverability made it a favorite among homeowners and snow removal professionals alike.
The Ariens Gravely 924112 ST928 LE is a two-stage snow blower designed for both residential and commercial use. While the specific production years may vary, this model was a mainstay in the Ariens Gravely lineup for a significant period. It's typically powered by a Tecumseh or Briggs & Stratton engine, generally ranging from 8 to 9 horsepower. Electric start options may have been available on some models. The two-stage design utilizes an auger to break up the snow and then an impeller to throw it a considerable distance. The 28-inch clearing width allows for efficient snow removal, while the intake height can handle drifts of a decent height. Expect throwing distances up to 40 feet, depending on snow conditions. The drive system is typically wheeled, offering multiple forward and reverse speeds for enhanced maneuverability. Chute rotation is usually manual, allowing for precise snow placement. Some models may include a headlight for improved visibility in low-light conditions. The 924112 ST928 LE is ideal for clearing driveways, sidewalks, and smaller parking lots, especially in areas with moderate to heavy snowfall.
Specifications
| Engine | Tecumseh or Briggs & Stratton 8-9 HP Electric Start (Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 28 inches |
| Intake Height | 20-21 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - 5-6 Forward / 2 Reverse |
| Fuel Tank | Approx. 1.5 Gallons |
| Weight | Approx. 200 lbs |
| Years Produced | Mid-Late 1990s to Early 2000s |
Maintenance Tips
- Regularly inspect the auger and impeller for wear and damage, replacing parts as needed to maintain optimal performance.
- Check and replace shear pins as necessary. Using the correct shear pins is crucial to protecting the auger gearbox from damage.
- Adjust belt tension to ensure proper power transfer from the engine to the auger and drive system. Replace worn or cracked belts promptly.
- Use fuel stabilizer in the off-season to prevent fuel degradation and ensure easy starting next season. Change the oil annually or after every 50 hours of use.
History & Background
The Ariens Gravely 924112 ST928 LE was introduced as a reliable and powerful option in the 28-inch two-stage snow blower category. It became a popular choice due to its durable construction and effective snow-clearing capabilities. While there weren't major redesigns during its production run, minor improvements were likely implemented over the years.
Frequently Asked Questions
What engine is in the Ariens Gravely 924112 ST928 LE?
The Ariens Gravely 924112 ST928 LE typically features a Tecumseh or Briggs & Stratton engine, with horsepower ranging from 8 to 9 HP. Electric start was often an available option.
What is the clearing width of the 924112 ST928 LE?
The Ariens Gravely 924112 ST928 LE has a clearing width of 28 inches and an intake height of approximately 20-21 inches.
Is the 924112 ST928 LE a single-stage or two-stage snow blower?
The Ariens Gravely 924112 ST928 LE is a two-stage snow blower. It uses an auger to collect and break up the snow, then an impeller to throw it out the chute.
What are common parts needed for the 924112 ST928 LE?
Common replacement parts for the Ariens Gravely 924112 ST928 LE include shear pins, belts (auger and drive), auger paddles (if equipped with rubber paddles), scraper bar, skid shoes, spark plugs, and fuel filters.
